Allyl complexes oxidative addition

The mechanism of the Zn chloride-assisted, palladium-catalyzed reaction of allyl acetate (456) with carbonyl compounds (457) has been proposed [434]. The reaction involves electroreduction of a Pd(II) complex to a Pd(0) complex, oxidative addition of the allyl acetate to the Pd(0) complex, and Zn(II)/Pd(II) transmetallation leading to an allylzinc reagent, which would react with (457) to give homoallyl alcohols (458) and (459) (Scheme 157). Substituted -lactones are electrosynthesized by the Reformatsky reaction of ketones and ethyl a-bromobutyrate, using a sacrificial Zn anode in 35 92% yield [542]. The effect of cathode materials involving Zn, C, Pt, Ni, and so on, has been investigated for the electrochemical allylation of acetone [543]. 

The generally accepted mechanism for Pd-catalyzed allylic desulfonylations is illustrated in Scheme 1. The first step is coordination of the Pd(0) catalyst to the allylic sulfone. Oxidative addition or internal SN2-type nucleophilic attack of the electron-rich palladium at the allylic position generates a neutral Pd(II) r 3-allyl complex, which leads to a more reactive cationic complex that is finally reduced. The equilibrium between the neutral and the more reactive cationic complexes depends on the nature and concentration of the palladium ligands as well as the counter anions present in solution. 

Other allylic substrates have become useful allylic sources to synthesize palladium(ll) 77 -allyls by oxidative addition to Pd(0) complexes. Allylic nitrogen derivatives such as ammonium, pyridinium, iminium salts,and other derivatives have been used. Allyl phosphonium salts and allyl phosphates also lead to 7 -allylic palladium(n) complexes. In these examples, a bidentate ligand is present in the reaction medium either coordinated to the Pd(0) precursor or added to the reaction mixture, so the amine, pyridine, imine, or phosphine byproduct does not remain coordinated to the metal in the final rf-MyX complex. 

Formation of a Tr-allylpalladium complex 29 takes place by the oxidative addition of allylic compounds, typically allylic esters, to Pd(0). The rr-allylpal-ladium complex is a resonance form of ir-allylpalladium and a coordinated tt-bond. TT-Allylpalladium complex formation involves inversion of stereochemistry, and the attack of the soft carbon nucleophile on the 7r-allylpalladium complex is also inversion, resulting in overall retention of the stereochemistry. On the other hand, the attack of hard carbon nucleophiles is retention, and hence Overall inversion takes place by the reaction of the hard carbon nucleophiles. 

TT-Aliylpalladium chloride reacts with a soft carbon nucleophile such as mal-onate and acetoacetate in DMSO as a coordinating solvent, and facile carbon-carbon bond formation takes place[l2,265], This reaction constitutes the basis of both stoichiometric and catalytic 7r-allylpalladium chemistry. Depending on the way in which 7r-allylpalladium complexes are prepared, the reaction becomes stoichiometric or catalytic. Preparation of the 7r-allylpalladium complexes 298 by the oxidative addition of Pd(0) to various allylic compounds (esters, carbonates etc.), and their reactions with nucleophiles, are catalytic, because Pd(0) is regenerated after the reaction with the nucleophile, and reacts again with allylic compounds. These catalytic reactions are treated in Chapter 4, Section 2. On the other hand, the preparation of the 7r-allyl complexes 299 from alkenes requires Pd(II) salts. The subsequent reaction with the nucleophile forms Pd(0). The whole process consumes Pd(ll), and ends as a stoichiometric process, because the in situ reoxidation of Pd(0) is hardly attainable. These stoichiometric reactions are treated in this section. 

Several Pd(0) complexes are effective catalysts of a variety of reactions, and these catalytic reactions are particularly useful because they are catalytic without adding other oxidants and proceed with catalytic amounts of expensive Pd compounds. These reactions are treated in this chapter. Among many substrates used for the catalytic reactions, organic halides and allylic esters are two of the most widely used, and they undergo facile oxidative additions to Pd(0) to form complexes which have o-Pd—C bonds. These intermediate complexes undergo several different transformations. Regeneration of Pd(0) species in the final step makes the reaction catalytic. These reactions of organic halides except allylic halides are treated in Section 1 and the reactions of various allylic compounds are surveyed in Section 2. Catalytic reactions of dienes, alkynes. and alkenes are treated in other sections. These reactions offer unique methods for carbon-carbon bond formation, which are impossible by other means. 

In addition, a catalytic version of Tt-allylpalladium chemistry has been devel-oped[6,7]. Formation of the Tr-allylpalladium complexes by the oxidative addition of various allylic compounds to Pd(0) and subsequent reaction of the complex with soft carbon nucleophiles are the basis of catalytic allylation. After the reaction, Pd(0) is reformed, and undergoes oxidative addition to the allylic compounds again, making the reaction catalytic.-In addition to the soft carbon nucleophiles, hard carbon nucleophiles of organometallic compounds of main group metals are allylated with 7r-allylpalladium complexes. The reaction proceeds via transmetallation. These catalytic reactions are treated in this chapter. 

Furthermore, the catalytic allylation of malonate with optically active (S)-( )-3-acetoxy-l-phenyl-1-butene (4) yields the (S)-( )-malonates 7 and 8 in a ratio of 92 8. Thus overall retention is observed in the catalytic reaction[23]. The intermediate complex 6 is formed by inversion. Then in the catalytic reaction of (5 )-(Z)-3-acetoxy-l-phenyl-l-butene (9) with malonate, the oxidative addition generates the complex 10, which has the sterically disfavored anti form. Then the n-a ir rearrangement (rotation) of the complex 10 moves the Pd from front to the rear side to give the favored syn complex 6, which has the same configuration as that from the (5 )-( )-acetate 4. Finally the (S)-( )-mal-onates 7 and 8 are obtained in a ratio of 90 10. Thus the reaction of (Z)-acetate 9 proceeds by inversion, n-a-ir rearrangement and inversion of configuration accompanied by Z to isomerization[24]. 

C-Allyl Complex Formation. AHyl hahde, aHyl ester, and other aHyl compounds undergo oxidative addition reactions with low atomic valent metal complexes to form TT-aHyl complexes. This is a specific reaction of aHyl compounds. 

Chlorination of the Cp Ru(amidinate) complexes is readily achieved by treatment with CHCI3, while oxidative addition of allylic halides results in formation of cationic Ti-allyl ruthenium(IV) species (Scheme 243). °... 

The proposed mechanism for Fe-catalyzed 1,4-hydroboration is shown in Scheme 28. The FeCl2 is initially reduced by magnesium and then the 1,3-diene coordinates to the iron center (I II). The oxidative addition of the B-D bond of pinacolborane-tfi to II yields the iron hydride complex III. This species III undergoes a migratory insertion of the coordinated 1,3-diene into either the Fe-B bond to produce 7i-allyl hydride complex IV or the Fe-D bond to produce 7i-allyl boryl complex V. The ti-c rearrangement takes place (IV VI, V VII). Subsequently, reductive elimination to give the C-D bond from VI or to give the C-B bond from VII yields the deuterated hydroboration product and reinstalls an intermediate II to complete the catalytic cycle. However, up to date it has not been possible to confirm which pathway is correct. 

Kurosawa et al. have reported that the relative stability of the ti-allyl palladium thi-olate 39 and the allyl sulfide/Pd(0) was highly ligand dependent. In the presence of PPhs or P(OMe)3 the stability was in favor of reductive elimination (Eq. 7.28), while in the presence of olefin or in the absence of any additional ligand the stability was in favor of oxidative addition (Eq. 7.29) [38]. This can explain the reactivity of the n-allyl palladium thiolate 33 and 38 proposed in Eq. (7.24) and path (c) of Scheme 7-10. The complex 33 should react with PhSH, but C-S bond-forming reductive elimination has to be suppressed in order to obtain the desired product 32. On the other hand, the complex 38 requires the phosphine ligand to promote the C-S bond-forming reductive elimination. 

The proposed mechanism (Scheme 7-11) includes (a) oxidative addition of a pro-tonated alcohol to Pd(0) to provide the ir-allyl palladium complex 44, (b) nucleophilic replacement of H2O by PhSH, (c) insertion of CO into the Pd-C bond, and (d) re-... 

Fukuzawa et al. reported that Pd-catalyzes the reaction of allylacetate, (PhSe)2 and Smfi to form allylselenide 71 (Eq. 7.52) [57]. The complex 72, which can be generated by the contact of (PhSe)2 with Pd(0) in the actual reaction mixture, was hardly active as a catalyst, indicating that the reaction proceeded via oxidative addition of allyl acetate to Pd(0) rather than oxidative addition of (PhSe)2 to Pd(0). 

There are few reports of oxidative addition to zerovalent transition metals under mild conditions three reports involving group 10 elements have appeared. Fischer and Burger reported the preparation of aTT -allylpalladium complex by the reaction of palladium sponge with allyl bromide(63). The Grignard-type addition of allyl halides to aldehydes has been carried out by reacting allylic halides with cobalt or nickel metal prepared by reduction of cobalt or nickel halides with manganese/iron alloy-thiourea(64). 

Oxidative addition occurs readily with allylic halides. Donor ligands (tertiary phosphines, bipyridyl, halide ions) and anionic complexes are required for activation of aromatic and vinyl halides (4, 70). Certain aliphatic halides are also reactive. The intermediate species R—Ni—X... 

If the insertion step following oxidative addition occurs on one of the two fragments resulting from oxidative addition, an intramolecular catalytic reaction (C—O — C—C rearrangement) takes place (example 40, Table III). It is interesting to note that two different products—2,6- and 3,6-heptadienoic acids—can be obtained from allyl 3-butenoate. Their ratio can be controlled by adding 1 mole of the appropriate phosphine or phosphite to bis(cyclooctadiene)nickel or similar complex. Bulky ligands favor the 2,6 isomer. It is thus possible to drive the reaction toward two different types of H elimination, namely, from the a or y carbon atoms. 

Two catalytic cycles are proposed to explain the difference in selectivity. In both cases, catalytic cycle is initiated by the oxidative addition of an alkynylstannane to nickel(O) species, leading to the formation of alkynylnickel(ll) complex 77 (Scheme 24).92 Then, an allene is inserted into the nickel(ll) complex in a manner which avoids steric repulsion with the butyl group to afford the anti-ir-a y complex 80. The carbometallation of the terminal alkyne can take place at the non-substituted allylic carbon of the corresponding syn-Ti-a y complex 78. The stereoselectivity is determined by the relative rate of the two possible insertion modes which depend on the ligand used. A bidentate... 

The most plausible mechanism proceeds through oxidative addition of the aldehyde to an active Ru(0) species to form (acyl)(hydrido)ruthenium(ll) complex 155. Insertion of the less-substituted double bond of the 1,3-diene into the Ru-H bond occurs to generate an (acyl)( 73-allyl)ruthenmm(ll) intermediate of type 156. Successive regioselective reductive eliminations between the acyl and the 73-allyl ligands provide the desired product with regeneration of the... 

It is postulated that the mechanism of the silane-mediated reaction involves silane oxidative addition to nickel(O) followed by diene hydrometallation to afford the nickel -jr-allyl complex A-16. Insertion of the appendant aldehyde provides the nickel alkoxide B-12, which upon oxygen-silicon reductive elimination affords the silyl protected product 71c along with nickel(O). Silane oxidative addition to nickel(O) closes the catalytic cycle. In contrast, the Bu 2Al(acac)-mediated reaction is believed to involve a pathway initiated by oxidative coupling of the diene and... 

---