INDEX alloys

METADEX (METals Abstracts/Alloy InDEX) is a bibliographic database covering the worldwide literature on metallurgy and materials. It is produced... 

World Gold Council. Jewellery Technology, Available online. URL http //www.gold.org/jewellery/technology/alloys/index. html printPage=true. 

All data used in this chapter were obtained from a manual collection of the author compiled over the last 15 years as well as from a computerized literature search consulting CAC (Chemical Abstracts Condensates), and METADEX (Metals Abstracts— Alloys Index) services up to July 1982. 

Copper Development Association P.O. Box 1840 Greenwich, Conn. 06836 Standards for wrought and cast copper and copper alloy products a standards handbook is pubUshed with tolerances, alloy data, terminology, engineering data, processing characteristics, sources and specifications cross-indexes for six coppers and 87 copper-based alloys that are recognized as standards. 

Using the complex refractive index N = n + iK where i =- f—1 and Kis the absorption coefficient, the reflectivity R of metals and alloys is given by ... 

The tables given under this subject are reprinted by permission from the Smithsonian Tables. For more detadea data on thermal expansion, see International Critical Tables tabular index, vol. 3, p. 1 abrasives, vol. 2, p. 87 alloys, vol. 2, p. 463 building stones, vol. 2, p. 54 carbons, vol. 2, p. 303 elements, vol. 1, p. 102 enamels, vol. 2, p. 115 glass, vol. 

The aim of the present paper is to extent the previous work " to different adsorbate than the substrate. We have thus studied the vibrational properties of Au single adatoms on the low-index faces of copper, and compared the present results with the above studies. The choice of Au comes from the fact that the Cu-Au alloys have been widely studied and used as prototype by many groups. 

Alloy Designation Tensile Strength 0.2% Yield Working Hardness Coeff. of Thermal Expansion Thermal Conductivity Cost Index... 

The task of predicting a reasonable structure for this alloy was carried out with no information about the powder X-ray diffraction pattern except that one group of investigators had said that it could not be indexed by any Bravais lattice. The prediction of the structure was made entirely on the basis of knowledge of the effective radii of metal atoms and the principles determining the structure of metals and intermetallic compounds. 

Properties of Liquidmetal Alloy, Liquidmetal Golf, http //www.liquidmetal.com/index.cfm action=tech... 

Brominated phosphate was also evaluated in a commercial glass filled polycarbonate/PET polyester alloy. A concentration of 10% gives a V-0 rating with an oxygen index value of about 35 (Table X). 

The flame retardant performance of various flame retardant additives in a commercial polycarbonate/ABS alloy were compared. No antimony oxide was required. The data shows brominated phosphate to be a highly efficient flame retardant in this alloy (Table XI). An alloy composition containing 14% brominated phosphate and no antimony oxide gives a V-0 rating (Table XII). The melt index of this alloy containing 12% brominated polystyrene was 7.6 g/10 min. (at 250°C) the equivalent resin containing brominated phosphate had a melt index of 13.3 g/10 min. 

Articulated indexing, 18 239 Artifactual materials standards, 15 742 Artificial aging, of aluminum alloys,... 

Controlled expansion alloys, 13 520-522 Controlled flavor release systems, 11 528, 543-553, 554-555 characteristics of, ll 544t demand for, 11 555 developments in, 11 558 elements of, 11 555-557 extrusion encapsulation for, 11 550 key aspects of, 11 556t morphologies of, 11 545 Controlled free-radical polymerization, block copolymers, 7 646 Controlled humidity drying, ceramics processing, 5 655-656 Controlled indexing, 18 241 Controlled initiation, 14 268-269 Controlled laboratory studies, in... 

---