Alkynes 1,7-diynes

Borylstannation, catalyzed by palladium, has been established for alkynes, diynes, and enynes.119,120 The reaction apparently occurs through the oxidative addition of B-Sn to the palladium to give the complex B-PdL -Sn, and one example of such an adduct has been isolated. 

Regioselective syntheses of 1,3,5-unsymmetrically substituted benzenes (309) are catalyzed by Pd(dba)2/PPh3 mixed alkyne/diyne reactants give mixtures containing homocoupled and mixed products (24 21 from HC CPh + HC=CC= CC Hn). The probable mechanism involves oxidative addition to the Pd(0) center, insertion of the second diyne into the Pd—H bond, reductive coupling and subsequent jr-complexation of this product to Pd(0), followed by Diels-Alder cycloaddition of the third diyne and elimination of product. 

In thf the complexes Ni2 ( u.- j -PhC2R)Cp2 (including R = Ph, C CPh) undergo irreversible oxidation processes near -I-0.7 V (vs SCE, FcH /FcH " -l-O.ll V, FcH/FcH" " -I-0.56 V) which results in the formation of deposits on the electrode surface. The anodic sweep indicates the presence of a reversible reduction near — 1.30 V attributed to a Ni2-centered reduction and the formation of [Ni2(M-7 -PhC2R)Cp2] Further reduction results in decomposition of the complexes, and the liberation of the alkyne or diyne ligand, as evidenced by two characteristic alkyne/diyne reductions at very negative potentials. ... 

A wide variety of main group heteroatom-containing ring systems are formed by the reaction of appropriate reagents with metallacycles derived from cycloaddition of Cp2Zr with alkynes, diynes, dienes, enynes or alkynenitriles. This is an exceptionally general process of considerable potential, especially for the synthesis of less-common types of heterocycles (Schemes IS and 16). ... 

The anion [RuCo3(CO)i2] has also been used to prepare metallic nanoparticles on mesoporous silica xerogels and MCM-41 type supports.Another important synthetic method to Ru-Co clusters is the alkyne-assisted cluster condensation that was established by Bruce et al. It was shown that ruthenium alkynes, diynes, or... 

Abstract Electron-rich mthenium(II) catalysts of type (C5R5)XRuL are used to perform selective carbon-carbon bond formation by combination of simple substrates such as the coupling of functional alkynes and alkenes with a variety of unsaturated molecules (alkynes, diynes, alkenes, dienes) or non-unsaturated molecules such as alcohols or water, often with atom economy. Various selective transformations are developed and can provide access to high multifunctional molecules. These reactions often proceed via an initial oxidative coupling leading to a ruthenacycle intermediate. 

The alkynyl iodide 359 undergoes cross-coupling with a terminal alkyne to give the 1,3-diyne 360[264]. No homocoupling product is formed. This reaction offers a good synthetic method for unsymmetrical 1,3-diynes. 

It was found [99JCS(PI )3713] that, in all cases, the formation of the deiodinated products 38 and 39 was accompanied by formation of the diynes 40 which were isolated in 60-90% yield. The authors believed that the mechanism of deiodination may be represented as an interaction ofbis(triphenylphosphine)phenylethynyl-palladium(II) hydride with the 4-iodopyrazole, giving rise to the bisftriphenylphos-phine)phenylethynyl palladium(II) iodide complex which, due to the reductive elimination of 1 -iodoalkyne and subsequent addition of alk-1 -yne, converts into the initial palladium complex. Furthermore, the interaction of 1-iodoalkynes with the initial alkyne in the presence of Cul and EtsN (the Cadiot-Chodkiewicz reaction) results in the formation of the observed disubstituted butadiynes 40 (Scheme 51). 

Diynes and triynes refer to alkynes containing two or three triple bonds poly-ynes contain multiple triple bonds. A conjugated triyne is a straight-chain hydrocarbon with triple bonds alternating with single bonds. An examples is... 

The total synthesis of ( )-estrone [( )-1 ] by Vollhardt et al. is a novel extension of transition metal mediated alkyne cyclotrimeriza-tion technology. This remarkable total synthesis is achieved in only five steps from 2-methylcyclopentenone (19) in an overall yield of 22%. The most striking maneuver in this synthesis is, of course, the construction of tetracycle 13 from the comparatively simple diyne 16 by combining cobalt-mediated and ort/io-quinodimethane cycloaddition reactions. This achievement bodes well for future applications of this chemistry to the total synthesis of other natural products. 

With the exocyclic alkylidene at C-13 properly in place, the elaboration of the l,5-diyn-3-ene moiety can now be addressed. Cleavage of both acetate and trimethylsilyl functions in 86 with basic methanol, followed by triethylsilylation of the newly formed tertiary hydroxyl group, efficiently affords alkyne 25 (86 % overall yield). This substance was regarded as a viable candidate for a Pd-catalyzed coupling reaction.12 Indeed, treatment of 25 with (Z)-chloroenyne 26 in the presence of a catalytic amount of Pd(PPh3)4 and Cu1 results in the formation of enediyne 24 in 91 % yield. 

Aryl- and alkenylcarbene complexes are known to react with alkynes through a [3C+2S+1C0] cycloaddition reaction to produce benzannulated compounds. This reaction, known as the Dotz reaction , is widely reviewed in Chap. Chromium-Templated Benzannulation Reactions , p. 123 of this book. However, simple alkyl-substituted carbene complexes react with excess of an alkyne (or with diynes) to produce a different benzannulated product which incorporates in its structure two molecules of the alkyne, a carbon monoxide ligand and the carbene carbon [128]. As referred to before, this [2S+2SH-1C+1C0] cycloaddition reaction can be carried out with diyne derivatives, showing these reactions give better yields than the corresponding intermolecular version (Scheme 80). 

The metathesis of ene-ynamides has been investigated by Mori et al. and Hsung et al. [80]. Second-generation ruthenium catalysts and elevated temperatures were required to obtain preparatively useful yields. Witulski et al. published a highly regioselective cyclotrimerization of 1,6-diynes such as 98 and terminal alkynes using the first-generation ruthenium metathesis catalyst 9... 

While diene metathesis or diyne metathesis are driven by the loss of a (volatile) alkene or alkyne by-product, enyne metathesis (Fig. 2) cannot benefit from this contributing feature to the AS term of the reaction, since the event is entirely atom economic. Instead, the reaction is driven by the formation of conjugated dienes, which ensures that once these dienes have been formed, the process is no longer a reversible one. Enyne metathesis can also be considered as an alkylidene migration reaction, because the alkylidene unit migrates from the alkene part to one of the alkyne carbons. The mechanism of enyne metathesis is not well described, as two possible complexation sites (alkene or alkyne) exist for the ruthenium carbene, leading to different reaction pathways, and the situation is further complicated when the reaction is conducted under an atmosphere of ethylene. Despite its enormous potential to form mul-... 

Fig. 3a,b Typical diyne metathesis reactions ring-closing alkyne metathesis (RCAM, a) diyne cross metathesis (ACM, b)... 

An obvious drawback in RCM-based synthesis of unsaturated macrocyclic natural compounds is the lack of control over the newly formed double bond. The products formed are usually obtained as mixture of ( /Z)-isomers with the (E)-isomer dominating in most cases. The best solution for this problem might be a sequence of RCAM followed by (E)- or (Z)-selective partial reduction. Until now, alkyne metathesis has remained in the shadow of alkene-based metathesis reactions. One of the reasons maybe the lack of commercially available catalysts for this type of reaction. When alkyne metathesis as a new synthetic tool was reviewed in early 1999 [184], there existed only a single report disclosed by Fiirstner s laboratory [185] on the RCAM-based conversion of functionalized diynes to triple-bonded 12- to 28-membered macrocycles with the concomitant expulsion of 2-butyne (cf Fig. 3a). These reactions were catalyzed by Schrock s tungsten-carbyne complex G. Since then, Furstner and coworkers have achieved a series of natural product syntheses, which seem to establish RCAM followed by partial reduction to (Z)- or (E)-cycloalkenes as a useful macrocyclization alternative to RCM. As work up to early 2000, including the development of alternative alkyne metathesis catalysts, is competently covered in Fiirstner s excellent review [2a], we will concentrate here only on the most recent natural product syntheses, which were all achieved by Fiirstner s team. 

Haloalkynes (R—C=C—X) react with ArSnBu3 and Cul to give R—C= C—Ar. Acetylene reacts with two equivalents of iodobenzene, in the presence of a palladium catalyst and Cul, to give 1,2-diphenylethyne. 1-Trialkylsilyl alkynes react with 1-haloalkynes, in the presence of a CuCl catalyst, to give diynes and with aryl triflates to give 1-aryl alkynes. Alkynes couple with alkyl halides in the presence of Sml2/Sm. Alkynes react with hypervalent iodine compounds " and with reactive alkanes such as adamantane in the presence of AIBN. ... 

Terminal alkynes can be coupled by heating with stoichiometric amounts of cupric salts in pyridine or a similar base. This reaction, which produces symmetrical diynes... 

This type of alkyne dimerization is also catalyzed by certain nickel complexes, as well as other catalysts and has been carried out internally to convert diynes to large-ring cycloalkynes with an exocyclic double bond. ... 

In this method, one alkyne is treated with Schwartz s reagent (see 15-17) to produce a vinylic zirconium intermediate. Addition of MeLi or MeMgBr, followed by the second alkyne, gives another intermediate, which, when treated with aqueous acid, gives the diene in moderate-to-good yields. The stereoisomer shown is the one formed in usually close to 100% purity. If the second intermediate is treated with I2 instead of aqueous acid, the 1,4-diiodo-1,3-diene is obtained instead, in comparable yield and isomeric purity. This reaction can also be done intramolecularly Diynes 56 can be cyclized to ( , E) exocychc dienes 57 by treatment with a zirconium complex. 

The reaction of alkenes with alkenes or alkynes does not always produce an aromatic ring. An important variation of this reaction reacts dienes, diynes, or en-ynes with transition metals to form organometallic coordination complexes. In the presence of carbon monoxide, cyclopentenone derivatives are formed in what is known as the Pauson-Khand reaction The reaction involves (1) formation of a hexacarbonyldicobalt-alkyne complex and (2) decomposition of the complex in the presence of an alkene. A typical example Rhodium and tungsten ... 

It must also be pointed out that the alkyne synthesis through the FVP process can also be extended to bis()5-oxo phosphonium ylides) for the preparation of 1.3-diynes compounds [16]. 

A plausible mechanism for the [2+2+2] cycloaddition reactions between diynes and heterocumnlenes (or nitriles) is shown in Scheme 5.16. Initially [2+2] oxidative addition of one alkyne and the heterocnmnlene (or nitrile) forms the five-mem-bered intermediate 54 compound 55 is formed after the insertion of the second alkyne and finally the seven-membered compound 55 undergoes reductive elimination to afford the prodnct 56 and regenerate the Ni(0) catalyst. 

Diyne 66, which possesses a three carbon linkage between the alkynes, also reacts with aldehyde 67 in presence of [Ni(COD)J/SIPr catalytic system (Scheme 5.19). However, the connectivity of the dienone 69 obtained from this diyne was different from those obtained from diyne 60. In the former case, adduct 69 was obtained from a )5-hydride elimination of the nickelacycle 68 instead of a reductive elimination. 

---