Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alkynes diyne complexation

Borylstannation, catalyzed by palladium, has been established for alkynes, diynes, and enynes.119,120 The reaction apparently occurs through the oxidative addition of B-Sn to the palladium to give the complex B-PdL -Sn, and one example of such an adduct has been isolated. [Pg.817]

The first tt complexes of 1,3-diynes were reported by Greenfield. Shortly thereafter, Tilney-Bassett described the first heterometallic derivatives. This area has grown steadily since these initial reports and many complexes of this type are now known. Diyne complexes are often simply alkyne-substituted analogues of conventional jr-alkyne complexes. Indeed, transition metal compounds that form -complexes with mono-alkynes can be expected to form complexes with diynes. However, the thermal sensitivity of terminal diynes, especially 1,3-butadiyne, may limit the application of routine reaction conditions in some cases. Further coordination of the ynyl ligand by additional metal fragments is usually determined by the reagent stoichiometry and by steric effects. [Pg.102]

The 62-e diyne complexes 115 and 116 are effective scaffolds for the trimeriza-tion of the diynes and codimerization of diyne and alkynes, resulting in extended carbon chains coordinated to the cluster. Thus, reactions with R C=CC=CR (R = Ph, Me) afforded Ru4(M4-PPh) /i4-RCC(CsCR )CPhC-p -CCPhCRC (C=CR ) (CO)s (118 R = Ph, Me). The former was also found as a minor product from Ru4(/i4-PPh)(CO)i3 and PhC=CC=CPh. " These are 64-e clusters containing a /44-PPh ligand capping an RU4 face, together with a C12 ligand formed from... [Pg.138]

Regioselective syntheses of 1,3,5-unsymmetrically substituted benzenes (309) are catalyzed by Pd(dba)2/PPh3 mixed alkyne/diyne reactants give mixtures containing homocoupled and mixed products (24 21 from HC CPh + HC=CC= CC Hn). The probable mechanism involves oxidative addition to the Pd(0) center, insertion of the second diyne into the Pd—H bond, reductive coupling and subsequent jr-complexation of this product to Pd(0), followed by Diels-Alder cycloaddition of the third diyne and elimination of product. [Pg.221]

Trimerization of 1-alkynes to substituted cyclobutadienes occurs in reactions of RhCl(l-alaninate)Cp with HC CR (R = Ph, tol), which afford Rh -C4HR2 (C=CR) Cp (310) possibly via intermediate dialkynylrhodium(III) complexes. Reductive coupling to an /j -diyne complex, which coordinates the third molecule of alkyne, is followed by further coupling to the rhodacyclopentadiene and reductive elimination of the cyclobutadiene (Scheme 72). ... [Pg.222]

In thf the complexes Ni2 ( u.- j -PhC2R)Cp2 (including R = Ph, C CPh) undergo irreversible oxidation processes near -I-0.7 V (vs SCE, FcH /FcH " -l-O.ll V, FcH/FcH" " -I-0.56 V) which results in the formation of deposits on the electrode surface. The anodic sweep indicates the presence of a reversible reduction near — 1.30 V attributed to a Ni2-centered reduction and the formation of [Ni2(M-7 -PhC2R)Cp2] Further reduction results in decomposition of the complexes, and the liberation of the alkyne or diyne ligand, as evidenced by two characteristic alkyne/diyne reductions at very negative potentials. ... [Pg.253]

Tamao and Ito proposed a mechanism for the nickel-catalyzed cyclization/hydrosilylation of 1,7-diynes initiated by oxidative addition of the silane to an Ni(0) species to form an Ni(ii) silyl hydride complex. Gomplexation of the diyne could then form the nickel(ii) diyne complex la (Scheme 1). Silylmetallation of the less-substituted G=C bond of la, followed by intramolecular / -migratory insertion of the coordinated G=G bond into the Ni-G bond of alkenyl alkyne intermediate Ila, could form dienylnickel hydride intermediate Ilia. Sequential G-H reductive elimination and Si-H oxidative addition would release the silylated dialkylidene cyclohexane and regenerate the silylnickel hydride catalyst (Scheme 1). [Pg.369]

The rhodium(l) diyne complex /ra j-[RhI(77 -Ph feC C HPh)(P Pr3)2] was obtained from [RhCl(P Pr3)2]2, 1,4-diphenylbutadiyne, and Nal. The rhodium-mediated trimerization of an alkyne to hexadienyne allowed the isolation of the corresponding rhodium-Tt-hexadienyne intermediate 384. ... [Pg.203]

It was found [99JCS(PI )3713] that, in all cases, the formation of the deiodinated products 38 and 39 was accompanied by formation of the diynes 40 which were isolated in 60-90% yield. The authors believed that the mechanism of deiodination may be represented as an interaction ofbis(triphenylphosphine)phenylethynyl-palladium(II) hydride with the 4-iodopyrazole, giving rise to the bisftriphenylphos-phine)phenylethynyl palladium(II) iodide complex which, due to the reductive elimination of 1 -iodoalkyne and subsequent addition of alk-1 -yne, converts into the initial palladium complex. Furthermore, the interaction of 1-iodoalkynes with the initial alkyne in the presence of Cul and EtsN (the Cadiot-Chodkiewicz reaction) results in the formation of the observed disubstituted butadiynes 40 (Scheme 51). [Pg.27]

Aryl- and alkenylcarbene complexes are known to react with alkynes through a [3C+2S+1C0] cycloaddition reaction to produce benzannulated compounds. This reaction, known as the Dotz reaction , is widely reviewed in Chap. Chromium-Templated Benzannulation Reactions , p. 123 of this book. However, simple alkyl-substituted carbene complexes react with excess of an alkyne (or with diynes) to produce a different benzannulated product which incorporates in its structure two molecules of the alkyne, a carbon monoxide ligand and the carbene carbon [128]. As referred to before, this [2S+2SH-1C+1C0] cycloaddition reaction can be carried out with diyne derivatives, showing these reactions give better yields than the corresponding intermolecular version (Scheme 80). [Pg.112]

While diene metathesis or diyne metathesis are driven by the loss of a (volatile) alkene or alkyne by-product, enyne metathesis (Fig. 2) cannot benefit from this contributing feature to the AS term of the reaction, since the event is entirely atom economic. Instead, the reaction is driven by the formation of conjugated dienes, which ensures that once these dienes have been formed, the process is no longer a reversible one. Enyne metathesis can also be considered as an alkylidene migration reaction, because the alkylidene unit migrates from the alkene part to one of the alkyne carbons. The mechanism of enyne metathesis is not well described, as two possible complexation sites (alkene or alkyne) exist for the ruthenium carbene, leading to different reaction pathways, and the situation is further complicated when the reaction is conducted under an atmosphere of ethylene. Despite its enormous potential to form mul-... [Pg.272]

An obvious drawback in RCM-based synthesis of unsaturated macrocyclic natural compounds is the lack of control over the newly formed double bond. The products formed are usually obtained as mixture of ( /Z)-isomers with the (E)-isomer dominating in most cases. The best solution for this problem might be a sequence of RCAM followed by (E)- or (Z)-selective partial reduction. Until now, alkyne metathesis has remained in the shadow of alkene-based metathesis reactions. One of the reasons maybe the lack of commercially available catalysts for this type of reaction. When alkyne metathesis as a new synthetic tool was reviewed in early 1999 [184], there existed only a single report disclosed by Fiirstner s laboratory [185] on the RCAM-based conversion of functionalized diynes to triple-bonded 12- to 28-membered macrocycles with the concomitant expulsion of 2-butyne (cf Fig. 3a). These reactions were catalyzed by Schrock s tungsten-carbyne complex G. Since then, Furstner and coworkers have achieved a series of natural product syntheses, which seem to establish RCAM followed by partial reduction to (Z)- or (E)-cycloalkenes as a useful macrocyclization alternative to RCM. As work up to early 2000, including the development of alternative alkyne metathesis catalysts, is competently covered in Fiirstner s excellent review [2a], we will concentrate here only on the most recent natural product syntheses, which were all achieved by Fiirstner s team. [Pg.353]

This type of alkyne dimerization is also catalyzed by certain nickel complexes, as well as other catalysts and has been carried out internally to convert diynes to large-ring cycloalkynes with an exocyclic double bond. ... [Pg.1020]

In this method, one alkyne is treated with Schwartz s reagent (see 15-17) to produce a vinylic zirconium intermediate. Addition of MeLi or MeMgBr, followed by the second alkyne, gives another intermediate, which, when treated with aqueous acid, gives the diene in moderate-to-good yields. The stereoisomer shown is the one formed in usually close to 100% purity. If the second intermediate is treated with I2 instead of aqueous acid, the 1,4-diiodo-1,3-diene is obtained instead, in comparable yield and isomeric purity. This reaction can also be done intramolecularly Diynes 56 can be cyclized to ( , E) exocychc dienes 57 by treatment with a zirconium complex. [Pg.1020]

The reaction of alkenes with alkenes or alkynes does not always produce an aromatic ring. An important variation of this reaction reacts dienes, diynes, or en-ynes with transition metals to form organometallic coordination complexes. In the presence of carbon monoxide, cyclopentenone derivatives are formed in what is known as the Pauson-Khand reaction The reaction involves (1) formation of a hexacarbonyldicobalt-alkyne complex and (2) decomposition of the complex in the presence of an alkene. A typical example Rhodium and tungsten ... [Pg.1091]

Rhodium complexes facilitate the reductive cydization of diyne species in good yield, although the product olefin geometry depends on the catalysts used. Moderate yields of -dialkylideneclopentane 169 resulted if a mixture of diyne 146 and trialkylsilane was added to Wilkinson s catalyst ClRh[PPh3]3 (Eq. 33) [101]. If, however, the diyne followed by silane were added to the catalyst, a Diels-Alder derived indane 170 was produced (Eq. 34). Cationic Rh complex, (S-BINAP)Rh(cod) BF4, provides good yields of the Z-dialkylidenecyclopentane derivatives, although in this case, terminal alkynes are not tolerated (Eq. 35) [102]. [Pg.252]

The reaction of Ba[P(SiMe3)2]2(THF)2 with diphenylbutadiyne in toluene for 12 days induces a m-addition of the diyne to the phosphide, followed by a 1,3-silyl group shift and ring closure. The dinuclear complex 132 is then isolated in good yield.283 Its complex structure contains Ba-C a bonds (2.881(5), 2.899(5) A), side-on Ba-alkyne (3.003(6), 3.363(6) A) and arene interactions, and Ba-phospholide bonds (Ba-P = 3.487(2) A) (Figure 65). [Pg.121]

A number of stable heterobimetallic copper alkyne complexes have been reported, based on the strategy of using another metal bis(alkynyl) complex as a chelating ligand for copper. The 1,4-diyne [(r -CsFGSiMe Ti-(C=GSiMe3)2]180 (or related complex) was found to stabilize the copper units GuX, with X = alkyl,180,181 vinyl,180... [Pg.182]

NbBrs, and NbCls-Pl Sn evidently proceeds via cyclotrimerization of diynes, which most probably involve cyclic carbometallation, details are not very clear.246 2463 Related reactions of Ta and Mo complexes were also investigated in this study. Formation of tantallacyclopropenes by complexation of alkynes with Ta complexes has also been reported247 (Scheme 51). In addition to the Ta-catalyzed polymerization of diynes mentioned above, Ta-catalyzed or -promoted cyclotrimerization reactions of alkynes to produce benzene derivatives, a Ta-promoted ethylene... [Pg.284]

The rhodium-catalyzed cyclization/hydrosilylation of internal diyne proceeds efficiently with high stereoselectivity (Scheme 106). However, terminal diynes show low reactivity to rhodium cationic complexes. Tolerance of functionalities seems to be equivalent between the rhodium and platinum catalysts. The bulkiness of the hydrosilane used is very important for the regioselectivity of the rhodium-catalyzed cyclization/hydrosilylation. For example, less-hindered dimethylethylsilane gives disilylated diene without cyclization (resulting in the double hydrosilylation of the two alkynes), and /-butyldimethylsilane leads to the formation of cyclotrimerization compound. [Pg.352]


See other pages where Alkynes diyne complexation is mentioned: [Pg.79]    [Pg.95]    [Pg.104]    [Pg.110]    [Pg.112]    [Pg.103]    [Pg.115]    [Pg.594]    [Pg.235]    [Pg.18]    [Pg.245]    [Pg.144]    [Pg.147]    [Pg.173]    [Pg.640]    [Pg.640]    [Pg.641]    [Pg.645]    [Pg.647]    [Pg.207]    [Pg.367]    [Pg.445]    [Pg.350]    [Pg.353]    [Pg.200]    [Pg.270]    [Pg.248]    [Pg.284]    [Pg.512]    [Pg.513]   
See also in sourсe #XX -- [ Pg.389 , Pg.390 , Pg.391 , Pg.392 , Pg.393 , Pg.394 , Pg.395 ]




SEARCH



Alkyne complexe

Alkyne complexes

Alkynes 1,7-diynes

Diynes

© 2024 chempedia.info