Zirconium vinyl

A further improvement in the cuprate-based methodology for producing PGs utilizes a one-pot procedure (203). The CO-chain precursor (67) was first functionalized with zirconocene chloride hydride ia THF. The vinyl zirconium iatermediate was transmetalated direcdy by treatment with two equivalents of / -butyUithium or methyUithium at —30 to —70° C. Sequential addition of copper cyanide and methyUithium eUcited the /V situ generation of the higher order cyanocuprate which was then reacted with the protected enone to give the PG. 

Alkyds. Alkyd resins (qv) are polyesters formed by the reaction of polybasic acids, unsaturated fatty acids, and polyhydric alcohols (see Alcohols, POLYHYDRic). Modified alkyds are made when epoxy, sUicone, urethane, or vinyl resins take part in this reaction. The resins cross-link by reaction with oxygen in the air, and carboxylate salts of cobalt, chromium, manganese, zinc, or zirconium are included in the formulation to catalyze drying. 

In this method, one alkyne is treated with Schwartz s reagent (see 15-17) to produce a vinylic zirconium intermediate. Addition of MeLi or MeMgBr, followed by the second alkyne, gives another intermediate, which, when treated with aqueous acid, gives the diene in moderate-to-good yields. The stereoisomer shown is the one formed in usually close to 100% purity. If the second intermediate is treated with I2 instead of aqueous acid, the 1,4-diiodo-1,3-diene is obtained instead, in comparable yield and isomeric purity. This reaction can also be done intramolecularly Diynes 56 can be cyclized to ( , E) exocychc dienes 57 by treatment with a zirconium complex. 

Some of the vinyl monomers polymerized by transition metal benzyl compounds are listed in Table IX. In this table R represents the rate of polymerization in moles per liter per second M sec-1), [M]0 the initial monomer concentration in moles per liter (M) and [C]0 the initial concentration of catalyst in the same units. The ratio i2/[M]0[C]0 gives a measure of the reactivity of the system which is approximately independent of the concentration of catalyst and monomer. It will be observed that the substitution in the benzyl group is able to affect the polymerization rate significantly, but the groups that increase the polymerization rate toward ethylene have the opposite effect where styrene is concerned. It would also appear that titanium complexes are more active than zirconium. The results with styrene and p-bromostyrene suggests that substituents in the monomer, which increase the electronegative character of the double bond, reduces the polymerization rate. The order of reactivity of various olefinically unsaturated compounds is approximately as follows ... 

As Scheme 16 shows, vinyl(methyl)zinc compounds 17 were obtained from the hydrozirconation of terminal alkynes with Cp2ZrHGl, followed by treatment with dimethylzinc. The initially formed vinyl zirconium complex undergoes rapid transmetallation with ZnMe2 to yield the product.44... 

As the second protonation of zirconacydes with weak acids such as methanol is much slower than the first, selective reactions can easily be performed (e. g. protonation with methanol, followed by iodination of the corresponding vinyl zirconium derivative with complete control of the selectivity see Eq. 2.12) [22]. 

Since the early disclosure by Negishi that zinc halide salts accelerate Pd(0) -catalyzed crosscouplings between vinyl zirconocenes and various halides [78], several methods have been developed that extend the utility of this metathesis process from a zirconium chloride to a zinc chloride (79 Scheme 4.47). Alternatively, routes to more reactive diorganozinc intermediates, e. g., using Me2Zn, convert readily available zinc derivatives to mixed species 80, which selectively couple with various electrophiles [14]. 

The impetus for the development of gem-bimetallics was initially to discover alkylidene-transfer reagents akin to Tebbe s reagent [14]. Schwartz prepared bimetallic aluminum—zirconocene derivatives by the hydrometallation of various vinyl metallic compounds [15—17]. Knochel has developed zinc—zirconium gem-bimetallics by hydrozircona-tion of vinylzincs and has used them as alkylidene-transfer reagents [18], More recently, other gem-bimetallics have been developed that exhibit different reactivities of the two carbon—metal bonds. Thus, Normant and Marek have reported the allylmetallation of vinyl metals to afford zinc—magnesium and zinc—lithium gem-bimetallics, which react selectively with various electrophiles such as ClSnBu3, H20, etc. [19, and references cited therein]. However, selective and sequential cleavage of the two carbon—metal bonds... 

Dicarbonyl coupling (8,483). This Ti-catalyzed coupling offers a useful route to cyclic sesquiterpenes such as humulene (4). The precursor is obtained by coupling a vinylic zirconium compound (1) with the u-allylpalladium complex (2) to give, after deprotection, the keto aldehyde 3 in 84% yield. This product couples to humulene as a single isomer in 60% yield. 

Sodium hydride Sodium hydrosulfite Sulfur chlorides Sulfuric acid Sulfuryl chloride Tetraethyl lead Tetramethyl lead Thionyl chloride Titanium tetrachloride Toluene diisocyanate Trichlorosilane Triethylaluminum Triethylborane Triisobutylaluminum Trimethylaluminum Trimethylchlorosilane Tripropyl aluminum Vanadium tetrachloride Vinyl trichlorosilane Zirconium tetrachloride... 

The stereospecific construction of the trisubstituted double bond of the side chain at C-1 of carbazomadurins A (253) and B (254) was achieved using Negishi s zirconium-catalyzed carboalumination of alkynes 758 and 763, respectively. Reaction of 5-methyl-l-hexyne (758) with trimethylalane in the presence of zirconocene dichloride, followed by the addition of iodine, afforded the vinyl iodide 759 with the desired E-configuration of the double bond. Halogen-metal exchange with ferf-butyllithium, and reaction of the intermediate vinyllithium compound with tributyltin chloride, provided the vinylstannane 751a (603) (Scheme 5.79). 

Short branches, specifically ethyl branches up to about 2 mol%, are formed in the polymerization of ethylene by meso-ansa zirconocenes containing unsubstituted cyclo-pentadienyl and indenyl ligands [Melillo et al., 2002]. Ethyl branches form by an isomerization process in which the usual P-hydride transfer to monomer is immediately followed by reinsertion of the vinyl-terminated polymer into the formed ethyl-zirconium bond. 

---