Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alkynes, cycloaddition with

Yamamoto has since shown this same reaction protocol can provide multicomponent access to tetrazoles, via the replacement of alkyne cycloaddition with that of substituted nitriles (Scheme 6.68) [95], This transformation proceeds with good product diversity. More recently, Barluenga has developed a bimolecular version for this reaction employing vinylbromides and sodium azide, providing access to N-unsubstituted triazoles [96]. [Pg.190]

The vinylcarbene complexes Cr(CX))5 =C(OEt)C=CXR) (X = NMe2, OEt R = alkyl, aryl) react with alkynes R OCH to form various cyclopenta[b]pyrans.30S In a two step process, addition of the alkynes NEt20Chfe u> the l-metalla-l,3-diene W(CX))s =C(OEt)CHsCHHi) results in metallatriene species that cyclise U) fwm cyclopentadiene complexes 40. Chromium Fischer type alkoxyalkenyl carbene complexes react with ketoalkynes to fcxm bicyclic lactones in a number of different processes involving 8 and 10-e cyclizations. Various dienyl carbene complexes whose parent in Crortho-substituted aromatic alcohols through a variation upon the more usual benzannulation reaction involving alkyne cycloaddition with carbene complexes. ... [Pg.226]

The reactivity of activated C-C double bonds with NHC has been reviewed more specifically. This report details the umpolung reaction involving Michael acceptors, the use of carbenes in Morita-Baylis-Hillman as well as in various cycloadditions. The catalysis of alkyne cycloaddition with nitrile oxide is also covered. [Pg.178]

Copper(l)-Catalyzed Azide—Alkyne Cycloaddition with Integrated Copper Scavenging Unit [61]... [Pg.306]

Figure 11.18 Microfluidic setup for copper(l)-catalyzed azide—alkyne cycloaddition with integrated copper scavenging unit... Figure 11.18 Microfluidic setup for copper(l)-catalyzed azide—alkyne cycloaddition with integrated copper scavenging unit...
Chlorination of sodium cyanodithioformate gives 3,4-dichloro-5-cyanoisothiazole (227), probably via the isothiazolodithiine (226) (72AHC(l4)l). The thienoisothiazole (228) undergoes cycloaddition with alkynic esters to give adducts such as compound (229), which... [Pg.172]

Fluorinated cyclobutanes and cyclobutenes are relatively easy to prepare because of the propensity of many gem-difluoroolefins to thermally cyclodimerize and cycloadd to alkenes and alkynes. Even with dienes, fluoroolefins commonly prefer to form cyclobutane rather than six-membered-ring Diels-Alder adducts. Tetrafluoroethylene, chlorotrifluoroethylene, and l,l-dichloro-2,2-difluoroethyl-ene are especially reactive in this context. Most evidence favors a stepwise diradical or, less often, a dipolar mechanism for [2+2] cycloadditions of fluoroalkenes [S5, (5], although arguments for a symmetry-allowed, concerted [2j-t-2J process persist [87], The scope, characteristic features, and mechanistic studies of fluoroolefin... [Pg.777]

On the other hand, its cycloadditions with 1,2-disubstituted alkenes under similar conditions produce stereospecifically a mixture of regioisomeric products [35] (equation 34) In contrast, its reaction with theunsymmetrical alkyne 1 -phenyl-propyne leads to a single product [35] (equation 35)... [Pg.809]

Recently, Burger devised an improved method of carrying out mild, regiospecific cyclizations that involve an intermediate that acts as a synthon for a nitrile ylide of HCN [47 (equation 48). With this methodology, cycloadditions with activated alkenes, alkynes, and azo compounds were earned out [47] (equation 49). All such reported reactions were regiospecific and had the same orientational preference... [Pg.813]

Nitrone hydrate is converted into nitrone by boiling in benzene with azeotropic removal of water [48] (equation 50). This in situ formation of nitrone is carried out in the presence of various alkenes and alkynes, which undergo cycloaddition with the nitrone [48, 49] (equations 51 and 52). [Pg.814]

Terminal alkynes with no electron-withdrawing group next to the acetylenic linkage when treated with enamines merely add across the double bonds of the enamines (9i). But electrophilic alkynes (those with an electron-withdrawing group next to the acetylenic linkage) undergo cycloaddition reactions with enamines. [Pg.230]

Unactivated aziridines, such as 24, are not as reactive as their N-sulfonyl analogues. Nevertheless, in aqueous conditions they react with different nucleophiles, as Scheme 12.23 illustrates. Treatment with buffered azide at 50 °C gave 25 in 90% yield. Hydrazine proved potent even at room temperature and 26 was fonned in 95 % yield, while phenyltetrazole required heating at reflux in water. The resulting amines participated in dipolar cycloadditions with alkynes and condensations with P-diketones. [Pg.469]

The formation of the tricarbonylchromium-complexed fulvene 81 from the 3-dimethylamino-3-(2 -trimethylsilyloxy-2 -propyl)propenylidene complex 80 and 1-pentyne also constitutes a formal [3+2] cycloaddition, although the mechanism is still obscure (Scheme 17) [76]. The rf-complex 81 must arise after an initial alkyne insertion, followed by cyclization, 1,2-shift of the dimethylamino group, and subsequent elimination of the trimethylsilyloxy moiety. Particularly conspicuous here are the alkyne insertion with opposite regioselectivity as compared to that in the Dotz reaction, and the migration of the dimethylamino functionality, which must occur by an intra- or intermo-lecular process. The mode of formation of the cyclopenta[Z ]pyran by-product 82 will be discussed in the next section. [Pg.35]

Aryl- and alkenylcarbene complexes are known to react with alkynes through a [3C+2S+1C0] cycloaddition reaction to produce benzannulated compounds. This reaction, known as the Dotz reaction , is widely reviewed in Chap. Chromium-Templated Benzannulation Reactions , p. 123 of this book. However, simple alkyl-substituted carbene complexes react with excess of an alkyne (or with diynes) to produce a different benzannulated product which incorporates in its structure two molecules of the alkyne, a carbon monoxide ligand and the carbene carbon [128]. As referred to before, this [2S+2SH-1C+1C0] cycloaddition reaction can be carried out with diyne derivatives, showing these reactions give better yields than the corresponding intermolecular version (Scheme 80). [Pg.112]

While these reports are mainly concerned with an evaluation of the peculiar structure of the iminophosphenium cation, this species also reveals cycloaddition properties. The cation shows a [2-t-l] cycloaddition behaviour towards alkynes [50]. With iminophosphanes and alkylazides the cations react with the formation of four- and five-membered heterocyclic ring systems [51], as shown for example in Scheme 9. [Pg.83]

Besides short ELPS, longer ELPs have also been conjugated to synthetic polymers. In one approach, Cu(I)-catalyzed azide-alkyne cycloaddition click chemistry was applied. For this purpose, ELPs were functionalized with azides or alkynes via incorporation of azidohomoalanine and homopropargyl glycine, respectively, using residue-specific replacement of methionine in ELP via bacterial expression [133]. More recently, an alternative way to site-selectively introduce azides into ELPs was developed. Here, an aqueous diazotransfer reaction was performed directly onto ELP[V5L2G3-90] using imidazole-1-sulfonyl azide [134]. [Pg.93]

By combining several click reactions, click chemistry allows for the rapid synthesis of useful new compounds of high complexity and combinatorial libraries. The 2-type reaction of the azide ion with a variety of epoxides to give azido alcohols has been exploited extensively in click chemistry. First of all, azido alcohols can be converted into amino alcohols upon reduction.70 On the other hand, aliphatic azides are quite stable toward a number of other standard organic synthesis conditions (orthogonality), but readily undergo 1,3-dipolar cycloaddition with alkynes. An example of the sequential reactions of... [Pg.159]

One obvious synthetic route to isoxazoles and dihydroisoxazoles is by [3+2] cycloadditions of nitrile oxides with alkynes and alkenes, respectively. In the example elaborated by Giacomelli and coworkers shown in Scheme 6.206, nitroalkanes were converted in situ to nitrile oxides with 1.25 equivalents of the reagent 4-(4,6-di-methoxy[l,3,5]triazin-2-yl)-4-methylmorpholinium chloride (DMTMM) and 10 mol% of N,N-dimethylaminopyridine (DMAP) as catalyst [373], In the presence of an alkene or alkyne dipolarophile (5.0 equivalents), the generated nitrile oxide 1,3-dipoles undergo cycloaddition with the double or triple bond, respectively, thereby furnishing 4,5-dihydroisoxazoles or isoxazoles. For these reactions, open-vessel microwave conditions were chosen and full conversion with very high isolated yields of products was achieved within 3 min at 80 °C. The reactions could also be carried out utilizing a resin-bound alkyne [373]. For a related example, see [477]. [Pg.238]

Bipyridinium ylides 133, generated in situ from 4,4-bipyridinium diquaternary salts 133, undergo 1,3-dipolar cycloaddition with activated alkynes under micro-waves, on KF-alumina in the absence of solvent, to give 7,7-bis-indolizines 134 in 81-93% yield (Scheme 9.40) [91]. The same reactions, when performed using benzene as a solvent under classical heating, yielded 7,7-bis-indolizine derivatives in yields of only 50-60% [92],... [Pg.319]

Merlic demonstrated the direct, non-photochemical insertion of carbon monoxide from acylamino chromium carbene complexes 14 to afford a presumed chromium-complexed ketene 15 <00JA7398>. This presumed metal-complexed ketene leads to a munchnone 16 or munchnone complex which undergo dipolar cycloaddition with alkynes to yield the pyrroles 17 upon loss of carbon dioxide. [Pg.112]


See other pages where Alkynes, cycloaddition with is mentioned: [Pg.160]    [Pg.164]    [Pg.146]    [Pg.160]    [Pg.164]    [Pg.146]    [Pg.149]    [Pg.84]    [Pg.22]    [Pg.111]    [Pg.301]    [Pg.13]    [Pg.423]    [Pg.180]    [Pg.1116]    [Pg.15]    [Pg.67]    [Pg.87]    [Pg.183]    [Pg.226]    [Pg.227]    [Pg.228]    [Pg.228]    [Pg.342]    [Pg.343]    [Pg.118]    [Pg.118]    [Pg.415]    [Pg.113]    [Pg.66]   
See also in sourсe #XX -- [ Pg.408 ]




SEARCH



1.2- Dihydropyridine 2 + 2] cycloaddition with alkynes

3- Aminobenzo cycloaddition reactions with activated alkynes

Alkenes, -cycloaddition with alkynes

Alkynes 2+2]-cycloaddition with ketenes

Alkynes 2+2]-cycloadditions

Alkynes cycloaddition

Alkynes cycloaddition, with azide

Alkynes internal, 6 + 2-cycloaddition with

Alkynes, -cycloaddition with cyclopropanes

Alkynes, cycloaddition with cyclotrimerization

Alkynes, cycloaddition with diaryl

Alkynes, cycloaddition with dienes

Cycloaddition with

Cycloaddition, of azides with alkynes

Cycloadditions reactions with, alkenes alkynes

Cycloadditions with Strained or Activated Alkynes

Cycloadditions with alkynes

Enamines cycloadditions with alkynes

Indolizine, 18+2] -cycloaddition with alkyn

With alkynes

© 2024 chempedia.info