Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alkyl chloride alkylation continued

Brown and De Lue have reported [11] the synthesis of a-bromoboranes of B-sec-alkyl-9-BBN. Consequently, bromination of B-i-Pr-9-BBN in methylene chloride with continuous removal of hydrogen bromide affords 2-bromo-2-pro-pyl-9-BBN (Eq. 19.2) (vide supra). [Pg.304]

The lUPAC rules permit alkyl halides to be named m two different ways called func twnal class nomenclature and substitutive nomenclature In functional class nomencla ture the alkyl group and the halide (fluoride chloride bromide or iodide) are desig nated as separate words The alkyl group is named on the basis of its longest continuous chain beginning at the carbon to which the halogen is attached... [Pg.144]

Isopropylnaphthalenes can be prepared readily by the catalytic alkylation of naphthalene with propjiene. 2-lsopropylnaphthalene [2027-17-0] is an important intermediate used in the manufacture of 2-naphthol (see Naphthalenederivatives). The alkylation of naphthalene with propjiene, preferably in an inert solvent at 40—100°C with an aluminum chloride, hydrogen fluoride, or boron trifluoride—phosphoric acid catalyst, gives 90—95% wt % 2-isopropylnaphthalene however, a considerable amount of polyalkylate also is produced. Preferably, the propylation of naphthalene is carried out in the vapor phase in a continuous manner, over a phosphoric acid on kieselguhr catalyst under pressure at ca 220—250°C. The alkylate, which is low in di- and polyisopropylnaphthalenes, then is isomerized by recycling over the same catalyst at 240°C or by using aluminum chloride catalyst at 80°C. After distillation, a product containing >90 wt % 2-isopropylnaphthalene is obtained (47). [Pg.487]

The free radical initiators are more suitable for the monomers having electron-withdrawing substituents directed to the ethylene nucleus. The monomers having electron-supplying groups can be polymerized better with the ionic initiators. The water solubility of the monomer is another important consideration. Highly water-soluble (relatively polar) monomers are not suitable for the emulsion polymerization process since most of the monomer polymerizes within the continuous medium, The detailed emulsion polymerization procedures for various monomers, including styrene [59-64], butadiene [61,63,64], vinyl acetate [62,64], vinyl chloride [62,64,65], alkyl acrylates [61-63,65], alkyl methacrylates [62,64], chloroprene [63], and isoprene [61,63] are available in the literature. [Pg.198]

In 1950 the Fischer-Tropsch synthesis was banned in Germany by the allied forces. Sinarol, a high paraffinic kerosene fraction sold by Shell, was used as a substitute. This ban coincided with the rapid development of the European petrochemical industry, and in due time Fischer-Tropsch synthesis applied to the production of paraffins became uneconomic anyway. After the war there was a steady worldwide increase in the demand for surfactants. In order to continually meet the demand for synthetic detergents, the industry was compelled to find a substitute for /z-paraffin. This was achieved by the oligomerization of the propene part of raffinate gases with phosphoric acid catalyst at 200°C and about 20 bars pressure to produce tetrapropene. Tetrapropene was inexpensive, comprising a defined C cut and an olefinic double bond. Instead of the Lewis acid, aluminum chloride, hydrofluoric acid could now be used as a considerably milder, more economical, and easier-to-handle alkylation catalyst [4],... [Pg.42]

The research group of Van Leeuwen reported the use of carbosilane de-ndrimers appended with peripherial diphenylphosphino end groups (i.e. 25, Scheme 26) [37]. After in situ complexation with allylpalladium chloride, the resultant metallodendrimer 25 was used as catalyst in the allylic alkylation of sodium diethyl malonate with allyl trifluoroacetate in a continuous flow reactor. Unlike in the batch reaction, in which a very high activity of the dendrimer catalyst and quantitative conversion of the substrate was observed, a rapid decrease in space time yield of the product was noted inside the membrane reactor. The authors concluded that this can most probably be ascribed to catalyst decomposition. The product flow (i.e. outside the membrane reactor)... [Pg.509]

Cross coupling between an aryl halide and an activated alkyl halide, catalysed by the nickel system, is achieved by controlling the rate of addition of the alkyl halide to the reaction mixture. When the aryl halide is present in excess, it reacts preferentially with the Ni(o) intermediate whereas the Ni(l) intermediate reacts more rapidly with an activated alkyl halide. Thus continuous slow addition of the alkyl halide to the electrochemical cell already charged with the aryl halide ensures that the alkyl-aryl coupled compound becomes the major product. Activated alkyl halides include benzyl chloride, a-chloroketones, a-chloroesters and amides, a-chloro-nitriles and vinyl chlorides [202, 203, 204], Asymmetric induction during the coupling step occurs with over 90 % distereomeric excess from reactions with amides such as 62, derived from enantiomerically pure (-)-ephedrine, even when 62 is a mixture of diastereoisomcrs prepared from a racemic a-chloroacid. Metiha-nolysis of the amide product affords the chiral ester 63 and chiral ephedrine is recoverable [205]. [Pg.140]

Tracer studies have been used in an attempt to determine the nature of the ends of the chain but these were as unsatisfactory as for propylene. Feldman and Perry (83) used triterated methanol to react the polyethylene from a titanium tetrachloridetrialkylaluminum catalyst. They found a continual increase in the number of polymeric chain ends which react with the tritium. This agrees with the results of Roha and Beears (84) who showed the very rapid exchange of alkyls which took place when ethylene was grown on a Ziegler catalyst in the presence of excess alkylaluminum chloride. In these experiments only an extremely small... [Pg.374]

The distillation is continued till the greater part of the liquid has distilled over, and no oily drops are to be seen in the condenser. The residue consisting of a concentrated solution of phosphorus and phosphoric acids in addition to excess of red phosphorus is discarded. The distillate is shaken up with water to remove alcohol, and then with dilute caustic soda to remove free iodine. Enough alkali must be used to render the lower layer of alkyl halide colourless. The latter is then separated ofl, dried over granular calcium chloride (6 gms.) and distilled. The preparation should be kept in the dark in a well-stoppered bottle. If exposed to light, iodine slowly separates, but may be prevented from so doing by adding a small quantity of colloidal silver to the liquid. [Pg.338]


See other pages where Alkyl chloride alkylation continued is mentioned: [Pg.254]    [Pg.5]    [Pg.538]    [Pg.158]    [Pg.899]    [Pg.161]    [Pg.40]    [Pg.292]    [Pg.482]    [Pg.331]    [Pg.684]    [Pg.156]    [Pg.73]    [Pg.90]    [Pg.185]    [Pg.899]    [Pg.420]    [Pg.429]    [Pg.313]    [Pg.170]    [Pg.841]    [Pg.104]    [Pg.55]    [Pg.254]    [Pg.478]    [Pg.706]    [Pg.1044]    [Pg.1052]    [Pg.528]    [Pg.225]    [Pg.154]    [Pg.899]    [Pg.120]    [Pg.402]    [Pg.177]    [Pg.177]    [Pg.514]    [Pg.568]   


SEARCH



Alkyl chloride alkylation

Alkyl chlorides

Alkylation continued)

© 2024 chempedia.info