1-Alkenes triple bonds

The mechanism of oxidation probably involves in most cases the initial formation of a glycol (15-35) or cyclic ester,and then further oxidation as in 19-7. In line with the electrophilic attack on the alkene, triple-bonds are more resistant to oxidation than double bonds. Terminal triple-bond compounds can be cleaved to carboxylic acids (RC=CHRCOOH) with thallium(III) nitrate or with [bis(trifluoroacetoxy)iodo]pentafluorobenzene, that is, C6F5l(OCOCF3)2, among other reagents. 

Carbon can also form multiple bonds with other carbon atoms. This results in unsaturated hydrocarbons such as olefins (alkenes), containing a carbon-carbon double bond, or acetylenes (alkynes), containing a carbon-carbon triple bond. Dienes and polyenes contain two or more unsaturated bonds. 

Catalytic hydrogenation is mostly used to convert C—C triple bonds into C C double bonds and alkenes into alkanes or to replace allylic or benzylic hetero atoms by hydrogen (H. Kropf, 1980). Simple theory postulates cis- or syn-addition of hydrogen to the C—C triple or double bond with heterogeneous (R. L. Augustine, 1965, 1968, 1976 P. N. Rylander, 1979) and homogeneous (A. J. Birch, 1976) catalysts. Sulfur functions can be removed with reducing metals, e. g. with Raney nickel (G. R. Pettit, 1962 A). Heteroaromatic systems may be reduced with the aid of ruthenium on carbon. 

The telomer obtained from the nitromethane 65 is a good building block for civetonedicarboxylic acid. The nitro group was converted into a ketone, and the terminal alkenes into carboxylic acids. The acyloin condensation of protected dimethyl dvetonedicarboxylate (141) afforded the 17-membered acyloin 142, which was modified to introduce a triple bond 143. Finally, the triple bond was reduced to give civetone (144)[120). 

The unsaturated c.vo-enol lactone 17 is obtained by the coupling of propargylic acetate with 4-pentynoic acid in the presence of KBr using tri(2-furyl)-phosphine (TFP) as a ligand. The reaction is explained by the oxypalladation of the triple bond of 4-pentynoic acid with the ailenyipailadium and the carbox-ylate as shown by 16, followed by reductive elimination to afford the lactone 17. The ( -alkene bond is formed because the oxypalladation is tnins addition[8]. 

Butyrolactones are prepared by intramolecular reaction of haloallylic 2-alkynoates. The a-chloromethylenebutyrolactone 301 is prepared by the intramolecular reaction of300[150,151]. 4 -Hydroxy-2 -alkenyl 2-alkynoates can be used instead of haloallylic 2-alkynoates, and in this reaction, Pd(II) is regenerated by elimination of the hydroxy group[152]. As a related reaction, the q-(chloromethylene)-7-butyrolactone 304 is obtained from the cinnamyl 2-alkynoate 302 in the presence of LiCl and CuCbflSS]. Isohinokinin (305) has been synthesized by this reaction[l 54]. The reaction is explained by chloro-palladation of the triple bond, followed by intramolecular alkene insertion to generate the alkylpalladium chloride 303. Then PdCb is regenerated by attack of CuCb on the alkylpalladium bond as a key step in the catalytic reaction. 

Hydrocarbons that contain a carbon-carbon triple bond are called alkynes Non cyclic alkynes have the molecular formula C H2 -2 Acetylene (HC=CH) is the simplest alkyne We call compounds that have their triple bond at the end of a carbon chain (RC=CH) monosubstituted or terminal alkynes Disubstituted alkynes (RC=CR ) have internal triple bonds You will see m this chapter that a carbon-carbon triple bond is a functional group reacting with many of the same reagents that react with the double bonds of alkenes... 

In naming alkynes the usual lUPAC rules for hydrocarbons are followed and the suffix ane is replaced by yne Both acetylene and ethyne are acceptable lUPAC names for HC=CH The position of the triple bond along the chain is specified by number m a manner analogous to alkene nomenclature... 

The conditions for hydrogenation of alkynes are similar to those employed for alkenes In the presence of finely divided platinum palladium nickel or rhodium two molar equivalents of hydrogen add to the triple bond of an alkyne to yield an alkane... 

The heat of hydrogenation of an alkyne is greater than twice the heat of hydro genation of an alkene When two moles of hydrogen add to an alkyne addition of the first mole (triple bond double bond) is more exothermic than the second (double bond single bond)... 

Both objectives have been met by designing special hydrogenation catalysts The most frequently used one is the Lindlar catalyst, a palladium on calcium carbonate combi nation to which lead acetate and quinoline have been added Lead acetate and quinoline partially deactivate ( poison ) the catalyst making it a poor catalyst for alkene hydro genation while retaining its ability to catalyze the addition of H2 to the triple bond... 

Hydrogenation of alkynes with internal triple bonds gives cis alkenes... 

Bivalent radicals derived from unbranched alkenes, alkadienes, and alkynes by removing a hydrogen atom from each of the terminal carbon atoms are named by replacing the endings -ene, -diene, and -yne by -enylene, -dienylene, and -ynylene, respectively. Positions of double and triple bonds are indicated by numbers when necessary. The name vinylene instead of ethenylene is retained for —CH=CH—. 

Dibromoborane—dimethyl sulfide is a more convenient reagent. It reacts directly with alkenes and alkynes to give the corresponding alkyl- and alkenyldibromoboranes (120—123). Dibromoborane differentiates between alkenes and alkynes hydroborating internal alkynes preferentially to terminal double and triple bonds (123). Unlike other substituted boranes it is more reactive toward 1,1-disubstituted than monosubstituted alkenes (124). 

Among the appHcations of lower valent titanium, the McMurry reaction, which involves the reductive coupling of carbonyl compounds to produce alkenes, is the most weU known. An excellent review of lower valent titanium reactions is available (195). Titanium(II)-based technology is less well known. A titanium(II)-based complex has been used to mediate a stetio- and regio-specific reduction of isolated conjugated triple bonds to the corresponding polyenes (196). 

With an activated C—C triple bond two successive additions can occur if the intermediate alkene is reactive enough. DMAD and 3,5-dimethylpyrazole give an initiaj fumarate (255) which reacts further at the other end to form regioselectively the succinates (256). On the other hand, methyl ethynyl ketone reacts twice at the same carbon atom with pyrazole to form 1,1-pyrazolylbutanone (258) (68ZC458). The probable intermediate, a pyrazolide vinylogue (257), can be prepared from methyl chlorovinyl ketone and pyrazole, in a reaction which is similar to acetylation (Section 4.04.2.1.3(x)). 

Multiple bonds are revealed clearly by anisotropic effects. Textbook examples include alkynes, shielded along the C=C triple bond, and alkenes and carbonyl compounds, where the nuclei are deshielded in the plane of the C=C and C=0 double bonds, respectively One criterion for distinguishing methyl groups attached to the double bond of pulegone (31), for example, is the carbonyl anisotropic effect. 

Alkenes and alkynes are similar in structure to the alkanes except the alkenes contain a carbon-to-carbon double bond (C=C) and the alkynes contain a carbon-to-carbon triple bond (C=C). The name prefixes are exactly the same as for the alkanes with the same number of carbons, but the endings are -one for compounds with double bonds and their derivatives and -yne for compounds with triple bonds... 

Hydrogenation of alkynes to alkenes using the Lindlai catalyst is attractive because it sidesteps the regioselectivity and stereoselectivity issues that accompany the dehydration of alcohols and dehydrohalogenation of alkyl halides. In tenns of regioselectivity, the position of the double bond is never in doubt—it appears in the carbon chain at exactly the sane place where the triple bond was. In tenns of stereoselectivity, only the cis alkene forms. Recall that dehydration and dehydrohalogenation normally give a cis-trans mixture in which the cis isomer is the minor product. 

Electrophiles react with alkynes in much the same way as with alkenes. Alkynes are typically much less reactive toward electrophiles than alkenes (see Chapter 7, Problem 14), however, and the initial product from addition to the triple bond usually undergoes further electrophilic addition. 

The Diels-Alder reaction,is a cycloaddition reaction of a conjugated diene with a double or triple bond (the dienophile) it is one of the most important reactions in organic chemistry. For instance an electron-rich diene 1 reacts with an electron-poor dienophile 2 (e.g. an alkene bearing an electron-withdrawing substituent Z) to yield the unsaturated six-membered ring product 3. An illustrative example is the reaction of butadiene 1 with maleic anhydride 4 ... 

The Pauson-Khand reaction was originally developed using strained cyclic alkenes, and gives good yields with such substrates. Alkenes with sterically demanding substituents and acyclic as well as unstrained cyclic alkenes often are less suitable substrates. An exception to this is ethylene, which reacts well. Acetylene as well as simple terminal alkynes and aryl acetylenes can be used as triple-bond component. 

Physical properties of alkynes [49, p. 251] are essentially similar to those of alkanes and alkenes. These compounds are weakly polar and are insoluble in water, but they are quite soluble in organic solvents of low polarity (e.g., ether, benzene, CCl ). Chemically, alkynes are more reactive than alkanes but behave like alkenes. The triple bond appears to be less reactive than the double bond in some reagents while more reactive in others. In a chemical reaction, the triple bond is usually broken into a double bond, which may eventually split into single bonds. 

Alkenes, alkynes, and arenes (aromatic compounds) all contain carbon-carbon multiple bonds. Alkenes have a double bond, alkynes have a triple bond, and cneues have alternating double and single bonds in a six-membered ring of carbon atoms. Because of their structural similarities, these compounds also have chemical similarities. 

---