Alkenes 3+2 cycloaddition with nitrile oxide

The conversion of the polystyrene-supported selenyl bromide 289 into the corresponding acid 290 allowed dicyclohexylcarbodiimide (DCC)-mediated coupling with an amidoxime to give the 1,2,4-oxadiazolyl-substituted selenium resin 291 (Scheme 48). Reaction with lithium diisopropylamide (LDA) and allylation gave the a-sub-stituted selenium resin 292, which was then used as an alkene substrate for 1,3-dipolar cycloaddition with nitrile oxides. Cleavage of heterocycles 293 from the resin was executed in an elegant manner via selenoxide syn-elimination from the resin <2005JC0726>. 

Cycloaddition with nitrile oxides occur with compounds of practically any type with a C=C bond alkenes and cycloalkenes, their functional derivatives, dienes and trienes with isolated, conjugated or cumulated double bonds, some aromatic compounds, unsaturated and aromatic heterocycles, and fullerenes. The content of this subsection is classified according to the mentioned types of dipolarophiles. Problems of relative reactivities of dienophiles and dipoles, regio- and stereoselectivity of nitrile oxide cycloadditions were considered in detail by Jaeger and... 

The auxihary acrylates 161 and 162 have been used in 1,3-dipolar cycloadditions with nitrile oxides. The camphor-derived acrylate 161 underwent a 1,3-dipolar cycloaddition with benzonitrile oxide with up to 56% de (Scheme 12.51) (263). The auxiliary in acrylate 162 is derived from naturally occurring L-quebrachitol, and provided an effective shielding of the re-face of the alkene in the reaction with benzonitrile oxide, as 90% de was obtained (273). Compound 163 was used in a reaction with the nitrone 1-pyrrole-1-oxide, and the reaction proceeded to give a complex mixture of products (274). 

Reactions of 3,5-dichloro-2,4,6-trimethyl benzonitrile oxide 241 with fluoro-methyl substituted alkenes 242, bearing a chiral sulfinyl group at -position of the double bond, afford diastereoisomeric 4,5-dihydroisoxazoles 243 and 244 [180] with a stereoselectivity lower than 2 1 (Scheme 110). The authors conclude that the efficiency of allyl sulfoxides to control diastereoselectivity of 1,3-dipolar cycloadditions with nitrile oxides is lower than that of vinyl sulfoxides. 

Dipolar Cycloadditions with Nitrile Oxides (Alkene-+-Isoxazoline) 1,3-Dipolar cycloaddition reactions of N-acryloyl-a-t-butyltoluene-2,a-sultam (6) with various nitrile oxides give isoxazolines with extremely high C(a)-re rr-facial control (eq 3). The levels of selectivity exceed those obtainable with the 10,2-camphorsultam auxiliary and are comparable to the highest levels reported for such cycloadditions. The corresponding reactions of a-methyltoluene-2,a-sultams are less selective. 

A -Isoxazolines are readily available from the 1,3-dipolar cycloaddition of nitrile -oxides with alkenes and from the condensation reaction of ehones with hydroxylamine. Therefore, methods of conversion of -isoxazolines into isoxazoles are of particular interest and of synthetic importance. 

The two major methods of preparation are the cycloaddition of nitrile oxides to alkenes and the reaction of a,/3-unsaturated ketones with hydroxylamines. Additional methods include reaction of /3-haloketones and hydroxylamine, the reaction of ylides with nitrile oxides by activation of alkyl nitro compounds from isoxazoline AT-oxides (methoxides, etc.) and miscellaneous syntheses (62HC(i7)i). 

Intramolecular nitrone cycloadditions often require higher temperatures as nitrones react more sluggishly with alkenes than do nitrile oxides and the products contain a substituent on nitrogen which may not be desirable. Conspicuously absent among various nitrones employed earlier have been NH nitrones, which are tautomers of the more stable oximes. However, Grigg et al. [58 a] and Padwa and Norman [58b] have demonstrated that under certain conditions oximes can undergo addition to electron deficient olefins as Michael acceptors, followed by cycloadditions to multiple bonds. We found that intramolecular oxime-olefin cycloaddition (lOOC) can occur thermally via an H-nitrone and lead to stereospecific introduction of two or more stereocenters. This is an excellent procedure for the stereoselective introduction of amino alcohol functionality via N-0 bond cleavage. 

As discussed in Section 6.2, nitro compounds are good precursors of nitrile oxides, which are important dipoles in cycloadditions. The 1,3-dipolar cycloaddition of nitrile oxides with alkenes or alkynes provides a straightforward access to 2-isoxazolines or isoxazoles, respectively. A number of ring-cleaving procedures are applicable, such that various types of compounds may be obtained from the primary adducts (Scheme 8.18). There are many reports on synthetic applications of this reaction. The methods for generation of nitrile oxides and their reactions are discussed in Section 6.2. Recent synthetic applications and asymmetric synthesis using 1,3-dipolar cycloaddition of nitrile oxides are summarized in this section. 

Cycloaddition of nitrile oxides to alkenes with various chiral auxiliaries are summarized in Table 8.1, which shows chiral alkenes and differential excess (de). 

One obvious synthetic route to isoxazoles and dihydroisoxazoles is by [3+2] cycloadditions of nitrile oxides with alkynes and alkenes, respectively. In the example elaborated by Giacomelli and coworkers shown in Scheme 6.206, nitroalkanes were converted in situ to nitrile oxides with 1.25 equivalents of the reagent 4-(4,6-di-methoxy[l,3,5]triazin-2-yl)-4-methylmorpholinium chloride (DMTMM) and 10 mol% of N,N-dimethylaminopyridine (DMAP) as catalyst [373], In the presence of an alkene or alkyne dipolarophile (5.0 equivalents), the generated nitrile oxide 1,3-dipoles undergo cycloaddition with the double or triple bond, respectively, thereby furnishing 4,5-dihydroisoxazoles or isoxazoles. For these reactions, open-vessel microwave conditions were chosen and full conversion with very high isolated yields of products was achieved within 3 min at 80 °C. The reactions could also be carried out utilizing a resin-bound alkyne [373]. For a related example, see [477]. 

Intermolecular Cycloaddition at the C=C Double Bond Addition at the C=C double bond is the main type of 1,3-cycloaddition reactions of nitrile oxides. The topic was treated in detail in Reference 157. Several reviews appeared, which are devoted to problems of regio- and stereoselectivity of cycloaddition reactions of nitrile oxides with alkenes. Two of them deal with both inter- and intramolecular reactions (158, 159). Important information on regio-and stereochemistry of intermolecular 1,3-dipolar cycloaddition of nitrile oxides to alkenes was summarized in Reference 160. 

Individual aspects of nitrile oxide cycloaddition reactions were the subjects of some reviews (161 — 164). These aspects are as follows preparation of 5-hetero-substituted 4-methylene-4,5-dihydroisoxazoles by nitrile oxide cycloadditions to properly chosen dipolarophiles and reactivity of these isoxazolines (161), 1,3-dipolar cycloaddition reactions of isothiazol-3(2//)-one 1,1-dioxides, 3-alkoxy- and 3-(dialkylamino)isothiazole 1,1-dioxides with nitrile oxides (162), preparation of 4,5-dihydroisoxazoles via cycloaddition reactions of nitrile oxides with alkenes and subsequent conversion to a, 3-unsaturated ketones (163), and [2 + 3] cycloaddition reactions of nitroalkenes with aromatic nitrile oxides (164). 

Formation of mixtures of the above type, which is common with internal olefins, do not occur with many functionalized alkenes. Thus, tertiary cinnamates and cinnamides undergo cycloadditions with benzonitrile oxides to give the 5-Ph and 4-Ph regioisomers in a 25-30 75-70 ratio. This result is in contrast to that obtained when methyl cinnamate was used as the dipolarophile (177). 1,3-Dipolar cycloaddition of nitrile oxides to ethyl o -hydroxycinnamate proceeds regiose-lectively to afford the corresponding ethyl fra s-3-aryl-4,5-dihydro-5-(2-hydro-xyphenyl)-4-isoxazolecarboxylates 36 (178). Reaction of 4-[( )-(2-ethoxycarbo-nylvinyl)] coumarin with acetonitrile oxide gives 37 (R = Me) and 38 in 73% and 3% yields, respectively, while reaction of the same dipolarophile with 4-methoxy-benzonitrile oxide affords only 37 (R = 4-MeOCr>H4) (85%) (179). 

A novel class of activators for chloride conductance in the cystic fibrosis transmembrane conductance regulator protein has been identified. These 3-(2-benzy-loxyphenyl)isoxazoles and 3-(2-benzyloxyphenyl)isoxazolines have been synthesized employing the 1,3-dipolar cycloaddition of nitrile oxides with various alkene and alkyne dipolarophiles (490). 

Dipolar addition is closely related to the Diels-Alder reaction, but allows the formation of five-membered adducts, including cyclopentane derivatives. Like Diels-Alder reactions, 1,3-dipolar cycloaddition involves [4+2] concerted reaction of a 1,3-dipolar species (the An component and a dipolar In component). Very often, condensation of chiral acrylates with nitrile oxides or nitrones gives only modest diastereoselectivity.82 1,3-Dipolar cycloaddition between nitrones and alkenes is most useful and convenient for the preparation of iso-xazolidine derivatives, which can then be readily converted to 1,3-amino alcohol equivalents under mild conditions.83 The low selectivity of the 1,3-dipolar reaction can be overcome to some extent by introducing a chiral auxiliary to the substrate. As shown in Scheme 5-51, the reaction of 169 with acryloyl chloride connects the chiral sultam to the acrylic acid substrate, and subsequent cycloaddition yields product 170 with a diastereoselectivity of 90 10.84... 

Unlike the impressive progress that has been reported with asymmetric catalysis in other additions to alkenes (i.e., the Diels-Alder cycloaddition, epoxidation, dihydroxylation, aminohydroxylation, and hydrogenation) so far this is terra incognita with nitrile oxide cycloadditions. It is easy to predict that this will become a major topic in the years to come. 

The use of chiral auxiliaries to induce (or even control) diastereoselectivity in the cycloaddition of nitrile oxides with achiral alkenes to give 5-substituted isoxazolines has been investigated by a number of groups. With chiral acrylates, this led mostly to low or modest diastereoselectivity, which was explained in terms of the conformational flexibility of the vinyl-CO linkage of the ester (Scheme 6.33) (179). In cycloadditions to chiral acrylates (or acrylamides), both the direction of the facial attack of the dipole as well as the conformational preference of the rotamers need to be controlled in order to achieve high diastereoselection. Although the attack from one sector of space may well be directed or hindered by the chiral auxiliary, a low diastereomer ratio would result due to competing attack to the respective 7i-faces of both the s-cis and s-trans rotamers of the acrylate or amide. 

Extensive work has been done to determine and understand the factors controlling diastereoselectivity in the cycloaddition of nitrile oxides to alkenes but very little is known about nitrile ylides in this regard. Work on their reactions with alkenes that are geminally disubstituted with electron-withdrawing groups (e.g., 187) has illustrated some of the difficulties in such studies. When the imidoyl chloride-base route was used to generate the nitrile ylides it was found that the products 188 epimerized under the reaction conditions. When the azirine route was used, the reaction was complicated by the photochemical isomerization of the dipolarophiles (96,97). Thus, in both cases, it proved impossible to determine the kinetic product ratio. 

The direct cycloaddition adduct was oxidized, resulting in the hydroxylated isoxazoline product (316). Better selectivities were obtained in 1,3-dipolar cycloadditions of 204 with nitrile oxides (317,318). The 1,3-dipolar cycloadditions proceeded with concomitant loss of the boron group to give the isoxazoline products in up to 74% ee (318). The alkene 204 was also tested in reactions with nitrones. The reactions proceeded with poor yields, but high selectivities were observed in two cases (318). Gilbertson et al. (319) investigated the use of chiral ot,p-unsaturated hexacarbonyldiiron acyl complexes 205 as dipolarophiles in reactions with nitrones. Selectivities of up to >92% de were observed. The iron moiety was removed oxidatively after the cycloaddition and the thioester was hydrolyzed. 

Ukaji and co-workers (379-381) described the first, and so far only, metal-catalyzed asymmetric 1,3-dipolar cycloaddition of nitrile oxides with alkenes. Upon treatment of allyl alcohol with diethylzinc and (7 ,/ )-diisopropyl tartrate followed by the addition of diethylzinc and substimted hydroximoyl chlorides 274, the isoxazoli-dines 275 are formed with enantioselectivities of up to 96% ee (Scheme 12.87). 

Isoxazoles and their partially or fully saturated analogs have mainly been prepared, both in solution and on insoluble supports, by 1,3-dipolar cycloadditions of nitrile oxides or nitrones to alkenes or alkynes (Figure 15.10). Nitrile oxides can be generated in situ on insoluble supports by dehydration of nitroalkanes with isocyanates, or by conversion of aldehyde-derived oximes into a-chlorooximes and dehydrohalogenation of the latter. Nitrile oxides react smoothly with a wide variety of alkenes and alkynes to yield the corresponding isoxazoles. A less convergent approach to isoxazoles is the cyclocondensation of hydroxylamine with 1,3-dicarbonyl compounds or a,[3-unsatu-rated ketones. 

Most of the approaches outlined in Figure 15.10 have been successfully realized on insoluble supports, either with the alkene or alkyne linked to the support, or with support-bound 1,3-dipoles (Table 15.16). Nitrile oxides are highly reactive 1,3-dipoles and react smoothly with both electron-poor and electron-rich alkenes, including enol ethers [200]. The addition of resin-bound nitrile oxides to alkenes (Entries 5 and 6, Table 15.16) has also been accomplished enantioselectively under catalysis by diisopropyl tartrate and EtMgBr [201], The diastereoselectivity of the addition of nitrile oxides and nitrones to resin-bound chiral acrylates has been investigated [202], Intramolecular 1,3-dipolar cycloadditions of nitrile oxides and nitrones to alkenes have been used to prepare polycyclic isoxazolidines on solid phase (Entries 7 and 9, Table 15.16). 

Pei Y, Moos WEI, Post-modification of peptoid side chains (3 + 2) cycloaddition of nitrile oxides with alkenes and alkynes on the solid-phase, Tetrahedron Lett., 35 5825-5828, 1994. 

Acetyl- and 3-benzoylisoxazoles 389 (and isoxazolines) have been prepared by one-pot reactions of alkynes (and alkenes) with ammonium cerium(iv) nitrate (CAN(lv)) or ammonium cerium(lll) nitrate tetrahydrate (CAN(m))-formic acid, in acetone or acetophenone. These processes probably involve 1,3-dipolar cycloaddition of nitrile oxides produced via nitration of the carbonyl compound by cerium salts. The existence of nitrile oxides as reaction intermediates was proved by the formation of the dimer furoxan 390 when the above reaction was carried out in absence of any dipolarophile (Scheme 95) <2004T1671>. An analogous improved procedure has been applied to alkynyl glycosides as dipolarophiles for the preparation of carbohydrate isoxazoles <2006SL1739>. 

---