Aldehydes 1,3-dipolar cycloadditions

Keywords imidate, dimethyl aminomalonate, aldehyde, 1,3-dipolar cycloaddition, 4,5-dihydrooxazol... 

Apart from the thoroughly studied aqueous Diels-Alder reaction, a limited number of other transformations have been reported to benefit considerably from the use of water. These include the aldol condensation , the benzoin condensation , the Baylis-Hillman reaction (tertiary-amine catalysed coupling of aldehydes with acrylic acid derivatives) and pericyclic reactions like the 1,3-dipolar cycloaddition and the Qaisen rearrangement (see below). These reactions have one thing in common a negative volume of activation. This observation has tempted many authors to propose hydrophobic effects as primary cause of ftie observed rate enhancements. 

A completely different dipolar cycloaddition model has been proposed39 in order to rationalize the stereochemical outcome of the addition of doubly deprotonated carboxylic acids to aldehydes, which is known as the Ivanov reaction. In the irreversible reaction of phenylacetic acid with 2,2-dimethylpropanal, metal chelation is completely unfavorable. Thus simple diastereoselectivity in favor of u f/-adducts is extremely low when chelating cations, e.g., Zn2 + or Mg- +, are used. Amazingly, the most naked dianions provide the highest anti/syn ratios as indicated by the results obtained with the potassium salt in the presence of a crown ether. 

Abstract The photoinduced reactions of metal carbene complexes, particularly Group 6 Fischer carbenes, are comprehensively presented in this chapter with a complete listing of published examples. A majority of these processes involve CO insertion to produce species that have ketene-like reactivity. Cyclo addition reactions presented include reaction with imines to form /1-lactams, with alkenes to form cyclobutanones, with aldehydes to form /1-lactones, and with azoarenes to form diazetidinones. Photoinduced benzannulation processes are included. Reactions involving nucleophilic attack to form esters, amino acids, peptides, allenes, acylated arenes, and aza-Cope rearrangement products are detailed. A number of photoinduced reactions of carbenes do not involve CO insertion. These include reactions with sulfur ylides and sulfilimines, cyclopropanation, 1,3-dipolar cycloadditions, and acyl migrations. 

Another example of a microwave-assisted 1,3-dipolar cycloaddition using azomethine ylides and a dipolarophile was the intramolecular reaction reported for the synthesis of hexahydrochromeno[4,3-fo]pyrrolidine 105 [70]. It was the first example of a solvent-free microwave-assisted intramoleciflar 1,3-dipolar cycloaddition of azomethine ylides, obtained from aromatic aldehyde 102 and IM-substituted glycinate 103 (Scheme 36). The dipole was generated in situ (independently from the presence of a base like TEA) and reacted directly with the dipolarophile present within the same molecifle. The intramolecu-... 

Likewise, heating of aldehyde 445 with persilylated N-benzylglycine 446 in toluene leads, via the 0,N-acetal 447 and decarboxylation, to the intermediate 448 this cycUzes in 25% yield to the 1,3-dipolar cycloaddition product 449 [50] (Scheme 5.16). 

Azines have been prepared by initial condensation of diethoxyphosphinyIhydrazine anions with aldehydes or ketones (Scheme 9). Phosphoryl azides undergo 1,3-dipolar cycloaddition to 2-tetralone enamines to give triazolines, possibly en route to amidines. A full paper on the addition of diethyl dibromophosphoramidate to alkenes(leading to the synthesis of 2-bromoalkylamines) has appeared. ... 

There are two important rhodium-catalyzed transformations that are broadly used in domino processes as the primary step. The first route is the formation of keto carbenoids by treatment of diazo keto compounds with Rh11 salts. This is then followed by the generation of a 1,3-dipole by an intramolecular cyclization of the keto carbenoid onto an oxygen atom of a neighboring keto group and an inter- or intramolecular 1,3-dipolar cycloaddition. A noteworthy point here is that the insertion can also take place onto carbonyl groups of aldehydes, esters, and amides. Moreover, cycloadditions of Rh-carbenes and ring chain isomerizations will also be discussed in this section. 

Besides isocyanides, Nair and coworkers also used carbenes to add to alkynes such as DMAD (9-90) leading to 1,3-dipoles, which can be trapped in a formal 1,3-dipolar cycloaddition (Scheme 9.21) [61]. Thus, the dimethoxycarbene 9-99, generated in situ through thermolysis of 9-98, reacts with DMAD (9-90) to give the dipole 9-100, which adds to an aldehyde 9-97 or a ketone. As the final product, dihydrofurans 9-101 are obtained in good yields. 

Dipolar addition to nitroalkenes provides a useful strategy for synthesis of various heterocycles. The [3+2] reaction of azomethine ylides and alkenes is one of the most useful methods for the preparation of pyrolines. Stereocontrolled synthesis of highly substituted proline esters via [3+2] cycloaddition between IV-methylated azomethine ylides and nitroalkenes has been reported.147 The stereochemistry of 1,3-dipolar cycloaddition of azomethine ylides derived from aromatic aldehydes and L-proline alkyl esters with various nitroalkenes has been reported. Cyclic and acyclic nitroalkenes add to the anti form of the ylide in a highly regioselective manner to give pyrrolizidine derivatives.148... 

H(65)1889, 2005EJO3553>. Starting dihydro[l,2,4]triazolo[3, 4-4]benzo[l,2,4]triazines 482 readily react with aromatic aldehydes to yield iminium salts 483. These salts treated with a base (e.g., triethylamine) are deprotonated to reactive 1,3-dipolar azomethine imines 484. In contrast to related five-membered heterocycles, these compounds are relatively unstable on storage in the solid form and particularly in solution. Fortunately, this obstacle can be easily circumvented by their in situ preparation and subsequent 1,3-dipolar cycloaddition. These compounds can participate in 1,3-dipolar cycloadditions with both symmetric and nonsymmetric dipolarophiles to give the expected 1,3-cycloadducts in stereoselective manner. Selected examples are given in Scheme 82. 

Pyranopyrrolothiazoles can be prepared in a similar way to certain pyrano- and thiopyrano-pyrrolizines and pyrrolizinopyridines as discussed earlier. Thus, thiazolidine-4-carboxylic acid reacts with the aldehyde 179 to give a 2 1 mixture of 180 and 181 (Equation 16). This reaction is a 1,3-dipolar cycloaddition of the alkene to the 1,3-dipole formed from reaction of the amino acid amine with the aldehyde <1988T4953, 1990T2213>. The alkyne analogue of 179 is similarly converted into 182 (Equation 17). 

Differently substituted pyrrolopyrroles can be constructed from a 1,3-dipolar cycloaddition, between the adduct from glycines and aldehydes and maleimides. Then, for example, the initially formed iV-allyl-o-bromophenyl-substituted pyrrolopyrrole mixture, 223, + 224, can then undergo an intramolecular cyclization in the presence of catalytic palladium(O) to give the pyrroloindolizine 225 <1991TL1359> (Scheme 61). 

To investigate the feasibility of employing 3-oxidopyridinium betaines as stabilized 1,3-dipoles in an intramolecular dipolar cycloaddition to construct the hetisine alkaloid core (Scheme 1.8, 77 78), a series of model cycloaddition substrates were prepared. In the first (Scheme 1.9a), an ene-nitrile substrate (i.e., 83) was selected as an activated dipolarophile functionality. Nitrile 66 was subjected to reduction with DIBAL-H, affording aldehyde 79 in 79 % yield. This was followed by reductive amination of aldehyde x with furfurylamine (80) to afford the furan amine 81 in 80 % yield. The ene-nitrile was then readily accessed via palladium-catalyzed cyanation of the enol triflate with KCN, 18-crown-6, and Pd(PPh3)4 in refluxing benzene to provide ene-nitrile 82 in 75 % yield. Finally, bromine-mediated aza-Achmatowicz reaction [44] of 82 then delivered oxidopyridinium betaine 83 in 65 % yield. 

Dipolar cycloaddition of diazomethane to aldehydes can successfully be used for the preparation of tetrahy-drooxadiazole derivatives. Photochemical interconversion of 3-acylamino-l,2,5-oxadiazole derivatives leads to 1,3,4-oxadiazoles, though the method suffers from lack of selectivity. Many reports concentrate only on the synthesis and applications of new 1,3,4-oxadiazoles substituted with a wide variety of groups without introducing much of new chemistry. 

I.3.4.2. Intermolecular Cycloaddition at C=X or X=Y Bonds Cycloaddition reactions of nitrile oxides to double bonds containing heteroatoms are well documented. In particular, there are several reviews concerning problems both of general (289) and individual aspects. They cover reactions of nitrile oxides with cumulene structures (290), stereo- and regiocontrol of 1,3-dipolar cycloadditions of imines and nitrile oxides by metal ions (291), cycloaddition reactions of o-benzoquinones (292, 293) and aromatic seleno aldehydes as dipolarophiles in reactions with nitrile oxides (294). 

Table 2.23 1,3-Dipolar cycloaddition of nitrone and various a, fi-unsaturated aldehydes...

Reaction of isatin or thioisatin 263 with (R)-(—)-thiaproline afforded thiazolo-oxazolidinones 264 as precursor of azomethine ylides, obtained by decarboxylation, for 1,3-dipolar cycloadditions (Equation 116) <2002SC435, 2004PS2549>. Condensation of 5-(alkylamino)methyl-2-pyrazolines 265 with ketones or aldehydes led to tetrahy-dro-imidazo[l,5-7]pyrazoles 266 (Equation 117) <1998JCCS375>. 

Azomethine ylides. The reaction of 1 with the oxime of an aldehyde results in an iminium salt 2. Desilylation of 2 (CsF) gives rise to an azomethine ylide (a) that undergoes 1,3-dipolar cycloaddition with electron-deficient alkenes (equation I). 

Since then, optically active a-aminophosphonates have been obtained by a variety of methods including resolution, asymmetric phosphite additions to imine double bonds and sugar-based nitrones, condensation of optically active ureas with phosphites and aldehydes, catalytic asymmetric hydrogenation, and 1,3-dipolar cycloadditions. These approaches have been discussed in a comprehensive review by Dhawan and Redmore.9 More recent protocols involve electrophilic amination of homochiral dioxane acetals,10 alkylation of homochiral imines derived from pinanone11 and ketopinic acid,12 and alkylation of homochiral, bicyclic phosphonamides.13... 

Dipolar cycloaddition of azomethine ylides, generated by the condensation of an a-amino acid and an aldehyde, is an efficient method for covalent sidewall functionalisation and has been successfully used to solubilise CNTs in most organic solvents (Tasis et al., 2003 Holzinger et al., 2003). This particular technique has also been utilised to obtain the first example of a bioactive peptide covalently linked to CNTs by the prospect for the potential applications in immunology (Bianco and Prato, 2003 Pantarotto et al., 2003a, b Bianco et al., 2005b). 

Another important method for preparation for exohedrally functionalized fullerenes is the 1,3-dipolar cycloaddition of in s/Yw-generated azomethine ylides to C60 yielding fulleropyrrolidines (Maggini et al., 1993). Further functionalization is facilitated either by the use of adequate aldehydes for the azomethine ylide formation or quatemization of the pyrrolidine nitrogen atom. Both bisaddition (Kordatos et al.,... 

---