Alcohols dichromate

The use of printed circuits reduces significantly the time necessary to wire electronic apparatus. The design of the circuit ensures that contacts between the components may be provided by a metal coating on an insulating base that is covered with a thin copper layer. Poly(vinyl alcohol)/dichromate or any usable photosensitive system is applied to the copper. The resist is hardened, and the copper regions not forming part of the circuit are removed by etching with aqueous ferric chloride or peroxodisuUate solution. 

Octan-2-ol (A), sometimes called sec.octy alcohol, can be obtained, at a low price and of high purity, from technical sources. As a secondary alcohol, it can be readily oxidised by potassium dichromate-sulphuric acid to n-hexyl... 

Absolute diethyl ether. The chief impurities in commercial ether (sp. gr. 0- 720) are water, ethyl alcohol, and, in samples which have been exposed to the air and light for some time, ethyl peroxide. The presence of peroxides may be detected either by the liberation of iodine (brown colouration or blue colouration with starch solution) when a small sample is shaken with an equal volume of 2 per cent, potassium iodide solution and a few drops of dilute hydrochloric acid, or by carrying out the perchromio acid test of inorganic analysis with potassium dichromate solution acidified with dilute sulphuric acid. The peroxides may be removed by shaking with a concentrated solution of a ferrous salt, say, 6-10 g. of ferrous salt (s 10-20 ml. of the prepared concentrated solution) to 1 litre of ether. The concentrated solution of ferrous salt is prepared either from 60 g. of crystallised ferrous sulphate, 6 ml. of concentrated sulphuric acid and 110 ml. of water or from 100 g. of crystallised ferrous chloride, 42 ml. of concentrated hydiochloric acid and 85 ml. of water. Peroxides may also be removed by shaking with an aqueous solution of sodium sulphite (for the removal with stannous chloride, see Section VI,12). 

By the controlled oxidation of primary alcohols with a solution of potassium or sodium dichromate in dilute sulphuric acid. To avoid the further oxidation to the corresponding acid, the aldehyde is removed as rapidly as possible by distillation through a fractionating column, for example ... 

Propionaldehyde. Use 34 g. (42-6 ml.) of n propyl alcohol, and a solution containing 56 g. of sodium chromate dihydrate, 300 ml. of water and 40 ml. of concentrated sulphuric acid. The experimental details are identical with those for n-butyraldehyde, except that the addition of the dichromate solution occupies 20 minutes, the temperature at the top of the column is not allowed to rise above 70-75°, and during the subsequent heating for 15 minutes the liquid passing over below 80° is collected the receiver must be cooled in ice. The yield of propionaldehyde, b.p. 47-50°, is 12 g. 

By the oxidation of secondary alcohols with potassium dichromate and dilute sulphuric acid, for example ... 

Methyl ethyl ketone. Use the apparatus of Fig. Ill, 61, 1 but with a 500 ml. round-bottomed flask. Place 40 g. (50 ml.) of see. butyl alcohol, 100 ml. of water and a few fragments of porous porcelain in the flask. Dissolve 100 g. of sodium dichromate dihydrate in 125 ml. of water in a beaker and add very slowly and with constant sturing 80 ml. of concentrated sulphuric acid allow to cool, and transfer the resulting solution to the dropping funnel. Heat the flask on a wire gauze or in an air bath until the alcohol mixture commences to boil. Remove the flame and run in the dichromate solution slowly and at such a rate that the temperature... 

The oxidation with excess of dichromate and dilute sulphuric acid is not always satisfactory for alcohols higher than n propyl because of the attendant production of appreciable amounts of esters indeed by using a fairly high concentration of sulphuric add, good yields of esters are obtained since esterification takes place at once, even in the cold, as long as an excess of alcohol is present, for example ... 

Oxidation of secondary alcohols to ke tones (Section 15 10) Many oxidizing agents are available for converting sec ondary alcohols to ketones PDC or PCC may be used as well as other Cr(VI) based agents such as chromic acid or po tassium dichromate and sulfuric acid... 

Dichromated Resists. The first compositions widely used as photoresists combine a photosensitive dichromate salt (usually ammonium dichromate) with a water-soluble polymer of biologic origin such as gelatin, egg albumin (proteins), or gum arabic (a starch). Later, synthetic polymers such as poly(vinyl alcohol) also were used (11,12). Irradiation with uv light (X in the range of 360—380 nm using, for example, a carbon arc lamp) leads to photoinitiated oxidation of the polymer and reduction of dichromate to Ct(III). The photoinduced chemistry renders exposed areas insoluble in aqueous developing solutions. The photochemical mechanism of dichromate sensitization of PVA (summarized in Fig. 3) has been studied in detail (13). 

Fig. 3. Chemistry of dichromated poly(vinyl alcohol) resist. Initially the dichromate ion absorbs light the light-activated species undergoes an...

Breath alcohol testing is accompHshed by a number of techniques. The oldest rehable procedure involves bubbling a measured volume of deep-lung air containing alcohol through an acidic solution of potassium dichromate, Deep-lung air is the last portion of expired breath. It is collected in... 

The estimation of alkoxy groups is not such a simple task. One method (26,68) involves hydrolysis and oxidation of the Hberated alcohol with excess standard potassium dichromate solution. The excess may then be estimated iodometrically. This method is suitable only for methoxides, ethoxides, and isopropoxides quantitative conversion to carbon dioxide, acetic acid, and acetone, respectively, takes place. An alternative method for ethoxides is oxidation followed by distillation, and titration of the Hberated acetic acid. 

We have already noted (Section 4.04.2.1.4(xi)) that alkyl groups on pyrazoles are oxidized with permanganate to carboxylic acids. Silver nitrate and ammonium persulfate transform 4-ethyl-1-methylpyrazole (436) into the ketone (437) (72JHC1373). The best yield was obtained starting with the alcohol (438) and using an acid dichromate solution as oxidizing agent. 

The procedure described is that of Wille and Saffer. Propiolaldehyde has also been prepared by the oxidation of propargyl alcohol using ammonium dichromate or manganese dioxide in 10% sulfuric acid. Propiolaldehyde has also been prepared by warming the dimethyl or diethyl acetal with dilute sulfuric acid. ... 

Atropine causes dilation of the pupil of the eye. A drop or two of an aqueous solution, containing 1 part in 130,000 parts of water, introduced into the eye of a cat is sufficient to produce this effect. When warmed with sulphuric acid and a small crystal of potassium dichromate, atropine develops a bitter almond odour. Evaporated to dryness on a water-bath with concentrated nitric acid, it gives a residue which becomes violet on adding a drop of sodium hydroxide solution in alcohol (Vitali s test). With a solution of mercuric chloride atropine gives a yellow to red precipitate of mercuric oxide. 

Codeinone, CjaHijOgN. This ketone (XLVII) corresponds to the secondary alcohol codeine and its stereoisomeride wocodeine. It may be prepared by oxidising codeine with potassium permanganate in acetone or with potassium dichromate in dilute sulphuric acid and in various other ways. Codeinone can be reduced to codeine electrolytically or by chemical methods. It crystallises from alcohol in prisms, m.p. 185-6, [a]J, ° — 205° (EtOH). The hydrochloride, B. HCl. HjO, has m.p. 179-80°, picrate, m.p. 205°, methiodide, B. CHjI. 2H2O, m.p. 180°. 

Struxine, C2iH3(,04N2, obtained by Schaefer from deteriorated nux-vomica seeds in about 0-1 per cent, yield, is regarded as a decomposition product of strychnine or brucine. It forms rhombic crystals from alcohol, is colourless, but becomes yellow on exposure to light and chars at 250°. It yields normal and acid salts, the latter only from excess of acid. With sulphuric acid it gives no coloration, but addition of potassium dichromate produces a yellow colour changing to green. 

---