Alcohols Birch reduction

Reduction with Alkali Metals, Various methods of reduction using alkali metals have come into use in total steroid synthesis in liquid ammonia, in ammonia with the addition of alcohols (Birch reduction), and in alcohols. The working procedures and mechanisms of these reactions have been discussed in appropriate reviews [87-89] in general, they take place through the formation of anions or anion-radicals with their subsequent protonation. As a rule, in these reactions isolated double bonds are not reduced the sequence of reduction of other unsaturated groupings is as follows a, -unsaturated ketones > slyrene or stilbene double bonds > aromatic rings. Each of these cases has its own stereochemical problems, which are discussed below on the basis of suitable examples. 

Metal-ammonia-alcohol reductions of aromatic rings are known as Birch reductions, after the Australian chemist Arthur J Birch who demonstrated their usefulness begin nmg m the 1940s... 

The mechanism by which the Birch reduction of benzene takes place (Figure 118) IS analogous to the mechanism for the metal-ammonia reduction of alkynes It involves a sequence of four steps m which steps 1 and 3 are single electron transfers from the metal and steps 2 and 4 are proton transfers from the alcohol... 

Section 1111 An example of a reaction m which the ring itself reacts is the Birch reduction The ring of an arene is reduced to a nonconjugated diene by treatment with a Group I metal (usually sodium) m liquid ammonia m the presence of an alcohol... 

Birch reduction (Section 11 11) Reduction of an aromatic nng to a 1 4 cyclohexadiene on treatment with a group I metal (Li Na K) and an alcohol in liquid ammonia Boat conformation (Section 3 7) An unstable conformation of cyclohexane depicted as... 

The A-ring of the 17-ol (25) derived from equilenin 3-methyl ether is reduced rapidly under Birch reduction conditions, since the 1,4-positions are unsubstituted. The B-ring is reduced at a much slower rate, as is characteristic of aromatic compounds in which 1,4-reduction can occur only if a proton enters an alkylated position. Treatment of (25) with sodium and t-butyl alcohol in ammonia reduces only the A-ring to afford the corresponding 1,4-dihydro compound in over 85% yield.On the other hand,... 

The term Birch reduction was originally applied to the reduction of aromatic compounds by alkali metals and an alcohol in ammonia. In recent years many chemists have used the term to include all metal-ammonia reductions, whether an alcoholic proton source is present or not. The author prefers to use the term Birch reduction to designate any reduction carried out in ammonia with a metal and a proton donor as or more acidic than an alcohol, since Birch customarily used such a proton donor in his extensive pioneering work. The term metal-ammonia reduction is best reserved for reductions in which ammonia is the only proton donor present. This distinction in terminology emphasizes the importance of the acidity of the proton donor in the reduction process. 

Krapcho and Bothner-By made additional findings that are valuable ii understanding the Birch reduction. The relative rates of reduction o benzene by lithium, sodium and potassium (ethanol as proton donor) wer found to be approximately 180 1 0.5. In addition, they found that ben zene is reduced fourteen times more rapidly when methanol is the protoi donor than when /-butyl alcohol is used. Finally, the relative rates of reduc tion of various simple aromatic compounds by lithium were deteiTnined these data are given in Table 1-2. Taken together, the above data sho that the rate of a given Birch reduction is strikingly controlled by the meta... 

A competing reaction in any Birch reduction is reaction of the alkali metal with the proton donor. The more acidic the proton donor, the more rapid IS the rate of this side reaction. Alcohols possess the optimum degree of acidity (pKa ca. 16-19) for use in Birch reductions and react sufficiently slowly with alkali metals in ammonia so that efficient reductions are possible with them. Eastham has studied the kinetics of reaction of ethanol with lithium and sodium in ammonia and found that the reaction is initially rapid, but it slows up markedly as the concentration of alkoxide ion in the mixture... 

A remarkable feature of the Birch reduction of estradiol 3-methyl ether derivatives, as well as of other metal-ammonia reductions, is the extreme rapidity of reaction. Sodium and -butyl alcohol, a metal-alcohol combination having a comparatively slow rate of reduction, effects the reduction of estradiol 3-methyl ether to the extent of 96% in 5 minutes at —33° lithium also effects complete reduction under the same conditions as is to be expected. Shorter reaction times were not studied. At —70°, reduction with sodium occurs to the extent of 56 % in 5 minutes, although reduction with lithium is virtually complete (96%) in the same time. (The slow rates of reduction of compounds of the 5-methoxytetralin type is exemplified by 5-methoxy-tetralin itself with sodium and f-butyl alcohol reduction occurs to the extent of only 50% in 6 hours vs. 99+% with lithium.) The iron catalyzed reaction of sodium with alcohols must be very fast since it competes so well with the rapid Birch reduction. One cannot compensate for the presence of iron in a Birch reduction mixture containing sodium by adding additional metal to extend the reaction time. The iron catalyzed sodium-alcohol reaction is sufficiently rapid that the aromatic steroid still remains largely unreduced. 

Many aromatic steroids submitted to the Birch reduction contain hydroxyl groups which are deprotonated to the corresponding alkoxides during the reduction, particularly if a tertiary alcohol is used as the proton donoi. The steroidal alkoxides and the one derived from the proton donor often precipitate and cause foaming of the reaction mixture, as was noted by Wilds and Nelson. These alkoxides can be kept in solution by adding an excess of the proton donor alcohol to the mixture the alcohol also assists in dissolving the starting hydroxylic steroid. A particularly useful reaction medium for hydroxylic steroids contains ammonia, tetrahydrofuran and -butyl alcohol in the volume ratio of 2 1 (Procedure 2, section V). This mixture... 

Metal-ammonia solutions reduce conjugated enones to saturated ketones and reductively cleave a-acetoxy ketones i.e. ketol acetates) to the unsubstituted ketones. In both cases the actual reduction product is the enolate salt of a saturated ketone this salt resists further reduction. If an alcohol is present in the reaction mixture, the enolate salt protonates and the resulting ketone is reduced further to a saturated alcohol. Linearly or cross-conjugated dienones are reduced to enones in the absence of a proton donor other than ammonia. The Birch reduction of unsaturated ketones to saturated alcohols was first reported by Wilds and Nelson using lithium as the reducing agent. This metal has been used almost exclusively by subsequent workers for the reduction of both unsaturated and saturated ketones. Calcium has been preferred for the reductive cleavage of ketol acetates. 

For the reduction of conjugated enones to saturated alcohols, Procedure 5 (section V) may be modified by adding methanol in place of ammonium chloride a sufficient excess of lithium is present to effect reduction of the intermediate saturated ketone to the alcohol. Procedure 2 (section V) for effecting Birch reductions is also useful for reduction of conjugated enones to saturated alcohols. Thus, 17-ethyl-19-nortestosterone affords crude 17a-ethyl-5a-estrane-3) ,17) -diol of mp 174-181°, reported mp 181-183°, in quantitative yield. 

Birch Reductions in Ammonia-Tetrahydrofuran-t-Butyl Alcohol ... 

Birch reduction of the diethyl ketal of estrone 3-methyl ether in ammonia-methylcyclohexane-t-amyl alcohol,... 

Birch reductions in ammonia-tetrahydro-furan-/-butyl alcohol, 49... 

The reduction of aromatic compounds 1 by alkali metals in liquid ammonia in the presence of an alcohol is called the Birch reduction, and yields selectively the 1,4-hydrogenated product " 2. 

Birch reduction of the norgetrel intermediate 5 oil owed by hydrolysis of the enol ether gives the enone oxidation of the alcohol at 17 leads to dione Fermentation of that intermediate in the presence of the mold PeniciIlium raistricky serves to introduce a hydroxyl group... 

Dissolving-Metal Reduction of Aromatic Compounds and Alkynes. Dissolving-metal systems constitute the most general method for partial reduction of aromatic rings. The reaction is called the Birch reduction,214 and the usual reducing medium is lithium or sodium in liquid ammonia. An alcohol is usually added to serve as a proton source. The reaction occurs by two successive electron transfer/proto-nation steps. 

The Birch reduction has been used by several generations of synthetic organic chemists for the conversion of readily available aromatic compounds to alicyclic synthetic intermediates. Birch reductions are carried out with an alkali metal in liquid NH3 solution usually with a co-solvent such as THF and always with an alcohol or related acid to protonate intermediate radical anions or related species. One of the most important applications of the Birch reduction is the conversion of aryl alkyl ethers to l-alkoxycyclohexa-l,4-dienes. These extremely valuable dienol ethers provide cyclohex-3-en-l-ones by mild acid hydrolysis or cyclohex-2-en-l-ones when stronger acids are used (Scheme 1). 

At the outset of our studies of the reactivity of I and II, it was necessary to investigate claims that tertiary henzamides were inappropriate substrates for the Birch reduction. It had been reported that reduction of A,A-dimethylbenzamide with sodium in NH3 in the presence of tert-butyl alcohol gave benzaldehyde and a benzaldehyde-ammonia adduct. We formd that the competition between reduction of the amide group and the aromatic ring was strongly dependent on reaction variables, such as the alkali metal (type and quantity), the availability of a proton source more acidic than NH3, and reaction temperature. Reduction with potassium in NH3-THF solution at —78 °C in the presence of 1 equiv. of tert-butyl alcohol gave the cyclohexa-1,4-diene 2 in 92% isolated yield (Scheme 3). At the other extreme, reduction with lithium in NH3-THF at —33 °C in the absence of tert-butyl alcohol gave benzaldehyde and benzyl alcohol as major reaction products. ... 

---