Aerosol protective equipment

A number of conditions must be considered when selecting protective equipment for individuals at the scene of a release. For instances such as "anthrax" letters when the mechanism of release is known and it does not involve an aerosol generating device, then responders can use Level C with high-efficiency particulate air (HEPA) filters. 

Gather important information the agent used was it aerosol, liquid, gas, powder or vapor location method of delivery do you have the necessary personal protective equipment (PPE) to deal with the hazard, or have you called for assistance by a specialized team are you sure that anyone who enters a contaminated area has the proper PPE and is trained in its use be sure to establish control — keep all victims, non-victims and bystanders at the crime scene (if there is any suspicion of an attack) until it is determined who among them may be a terrorist or a witness perform decontamination, triage if necessary, isolation, quarantine, search and locate evidence, maintain chain of control, and collect samples. 

Caution Aerosol dissemination of botulism is a new and potential danger in the terrorist world of today. If aerosol dissemination is used, first responders should wear SCBA and personal protective equipment (PPE) without fail. 

Please be advised that all chemicals should be considered hazardous and should be handled in a hood and with proper personal protective equipment (lab coat, proper gloves, approved safety glasses, and/or goggles). Avoid inhaling vapors and/or aerosolized materials. Avoid skin/eye contact with all chemicals at all times. Wash hands frequently. See the instructor if you have any questions or concerns. 

Inspect containers regularly for tears, splits, breaks, leaks, rust, or corrosion. When a container is damaged, pnt on appropriate personal protective equipment and take immediate action. If the damaged container is an aerosol can or fumigant tank that contains pesticides under pressure, use special care to avoid accidentally releasing the pesticide into the air. When a container is damaged ... 

The purpose of the tuberculosis control plan is to prevent the transmission of tuberculosis (TB), which occurs when an individual inhales a droplet that contains Mycohacterium tuberculosis. M. tuberculosis is aerosolized when an infected individual sneezes, speaks, or coughs. Transmission of TB and exposure to TB can be greatly diminished with early identification and isolation of patients at risk, environmental controls, appropriate use of respiratory protection equipment, education of laboratory employees, and when necessary early initiation of therapy. 

Personal protective equipment, high efficiency particulate aerosol (HEPA) vacuum cleaners, and disposal methods. 

Biological agents can only be transmitted to medical personnel from secondary aerosolization from dry agents. Decontamination with 0.5% hypochlorite solution or flooding with water or saline will make this risk negligible. No protective equip-... 

Equipment is considered the primary barrier for protection of the employees. Items such as biosafety cabinets, safety centrifuges, enclosed containers, impervious work surfaces, autoclaves, foot-operated sinks, and other equipment specifically designed to prevent direct contact with infectious organisms or with aerosols must be available. Personal protective equipment can also be considered as an effective secondary barrier if engineering controls are not sufficient. These latter items can include, at minimum, a lab coat or wrap-around gown, possibly gloves, masks, or respirators, goggles, and head and foot covers. 

Respiratory protection products or respirators are classified on the basis of the achieved applied protection factor (APF). This is the factor by which the exposure by inhalation is reduced as the protection equipment is used in the required manner. Dust filters are positioned in three classes FFPl, FFP2 and FFP3, usually called PI, P2 and P3 respectively. They provide protection against powders or aerosols or both. 

Use as solvent in paint and varnish removers manufacture of aerosols cold cleaning and ultrasonic cleaning and as a solvent in furniture stripping. General dilution ventilation local exhaust ventilation local exhaust ventilation personal protective equipment substitution. 

---