Adsorption, immobilization mechanism

Adsorption to the surfaces of ettringite and monosulphate is an alternative immobilization mechanism that has been examined for SeO , ScO and of AsO (Myneni et al. 1997 Baur 2002 Baur Johnson 2002a). The studies estimated a maximum surface site concentration of approximately 0.03-0.1 mol/kg... 

Eic M., Micke A., KoCirik M., Jama M. and Zik6nov6 A. Diffusion and immobilization mechanisms in zeolites studied by ZLC chromatography. Adsorption... 

We showed that these mesoporous silica materials, with variable pore sizes and susceptible surface areas for functionalization, can be utilized as good separation devices and immobilization for biomolecules, where the ones are sequestered and released depending on their size and charge, within the channels. Mesoporous silica with large-pore-size stmctures, are best suited for this purpose, since more molecules can be immobilized and the large porosity of the materials provide better access for the substrates to the immobilized molecules. The mechanism of bimolecular adsorption in the mesopore channels was suggested to be ionic interaction. On the first stage on the way of creation of chemical sensors on the basis of functionalized mesoporous silica materials for selective determination of herbicide in an environment was conducted research of sorption activity number of such materials in relation to 2,4-D. 

Phytostabilization (also known as in-place inactivation or phytoimmobilization) is the use of certain plant species to immobilize contaminants in the soil through absorption and accumulation by roots, adsorption onto roots, or precipitation, complexation, and metal valence reduction within the root zone. The following three mechanisms determine the fate of the contaminants within the phytostabilization process46 ... 

Recent reports describe the use of various porous carbon materials for protein adsorption. For example, Hyeon and coworkers summarized the recent development of porous carbon materials in their review [163], where the successful use of mesoporous carbons as adsorbents for bulky pollutants, as electrodes for supercapacitors and fuel cells, and as hosts for protein immobilization are described. Gogotsi and coworkers synthesized novel mesoporous carbon materials using ternary MAX-phase carbides that can be optimized for efficient adsorption of large inflammatory proteins [164]. The synthesized carbons possess tunable pore size with a large volume of slit-shaped mesopores. They demonstrated that not only micropores (0.4—2 nm) but also mesopores (2-50 nm) can be tuned in a controlled way by extraction of metals from carbides, providing a mechanism for the optimization of adsorption systems for selective adsorption of a large variety of biomolecules. Furthermore, Vinu and coworkers have successfully developed the synthesis of... 

Figure 15.4(A) shows the effect of the R = Zn2+/Al3+ ratio, which determines the charge density of the LDH layer, on the Freundlich adsorption isotherms. K values are far higher than those measured for smectite or other inorganic matrices. The increase in Kf with the charge density (Kf= 215, 228, 325mg/g, respectively, for R = 4, 3 and 2) is supported by a mechanism of adsorption based on an anion exchange reaction. The desorption isotherms confirm that urease is chemically adsorbed by the LDH surface. The aggregation of the LDH platelets can affect noticeably their adsorption capacity for enzymes and the preparation of LDH adsorbant appears to be a determinant step for the immobilization efficiency. [ZnRAl]-urease hybrid LDH was also prepared by coprecipitation with R = 2, 3 and 4 and Q= urease/ZnRAl from 1 /3 up to 2.5. For Q < 1.0,100 % of the urease is retained by the LDH matrix whatever the R value while for higher Q values an increase in the enzyme/LDH weight ratio leads to a decrease in the percentage of the immobilized amount.

Immobilized enzymes are attached to a solid support by adsorption or chemical binding or mechanical entrapment in the pores of a gel structure but retain their catalytic power. Their merit is ease of separation from the finished reaction product. 

Physical or electrochemical adsorption uses non-covalent forces to affix the nucleic acid to the solid support and represents a relatively simple mechanism for attachment that is easy to automate. Adsorption was favoured and described in some chapters as suitable immobilization technique when multisite attachment of DNA is needed to exploit the intrinsic DNA oxidation signal in hybridization reactions. Dendrimers such as polyamidoamine with a high density of terminal amino groups have been reported to increase the surface coverage of physically adsorbed DNA to the surface. Furthermore, electrochemical adsorption is described as a useful immobihzation strategy for electrochemical genosensor fabrication. 

The thickness of the interphase is a similarly intriguing and contradictory question. It depends on the type and strength of the interaction and values from 10 Ato several microns have been reported in the hterature for the most diverse systems [47,49,52,58-60]. Since interphase thickness is calculated or deduced indirectly from some measured quantities, it depends also on the method of determination. Table 3 presents some data for different particulate filled systems. The data indicate that interphase thicknesses determined from some mechanical properties are usually larger than those deduced from theoretical calculations or from extraction of filled polymers [49,52,59-63]. The data supply further proof for the adsorption of polymer molecules onto the filler surface and for the decreased mobility of the chains. Thermodynamic considerations and extraction experiments yield data which are not influenced by the extent of deformation. In mechanical measurements, however, deformation of the material takes place in all cases. The specimen is deformed even during the determination of modulus. With increasing deformations the role and effect of the immobilized chain ends increase and the determined interphase thickness also increases (see Table 3) [61]. 

---