Triazole addition

Triazole undergoes halogenation, and bromination of the triazole provides the 4,5-dibromo derivative. The 4,5-dibromotriazole was prepared by bromination of triazole with NBS. Triazoles are readily alkylated on nitrogen by alkylhalides, dimethylsulfate, diazomethane, and conjugate addition. In addition, triazoles are acylated by acyl halides and anhydrides and the alkylations are not regioselective. ... 

HydrOxy-THISs react with diethoxycarbonylazine producing a 1,2,4-triazole via addition, elimination of carbonyl sulfide (29). and subsequent loss of the ester groups (Scheme 20) (30). 

In addition to bonding with the metal surface, triazoles bond with copper ions in solution. Thus dissolved copper represents a "demand" for triazole, which must be satisfied before surface filming can occur. Although the surface demand for triazole filming is generally negligible, copper corrosion products can consume a considerable amount of treatment chemical. Excessive chlorination will deactivate the triazoles and significantly increase copper corrosion rates. Due to all of these factors, treatment with triazoles is a complex process. 

Substituents are expected to alter the electron density at the multiply-bonded nitrogen atom, and therefore the basicity, in a manner similar to that found in the pyridine series. The rather limited data available appear to bear out these assumptions. The additional ring nitrogen atoms in triazoles, oxadiazoles, etc. are quite strongly base-weakening this is as... 

The addition of phthalimidylnitrene (374) to simple alkynes affords 1-azirines in yields of 1-15% (Scheme 10). In this reaction, which is of no real preparative value, the symmetrical 2-azirines (375) were suggested as the most plausible intermediates and unequivocal proof of the existence of such species was demonstrated from a series of 1,2,3-triazole pyrolysis reactions <71CC1518). Extrusion of nitrogen from the regioisomeric 4,5-disubstituted 1,2,3-triazoles (376) during flash vacuum pyrolysis furnished identical product mixtures which included both regioisomeric 1-azirines (377). 

A mixture of 300 ml. of water, 150 ml. of concentrated nitric acid, and 0.2 g. of sodium nitrite (Note 2) is placed in a 2-1. threenecked flask equipped with a stirrer and a thermometer. The stirred mixture is warmed to 45°, and 2 g. of l,2,4-triazole-3(5)-thiol is added. When oxidation starts, as indicated by the evolution of brown fumes of nitrogen dioxide and a rise in temperature, a bath of cold water is placed under the reaction flask to provide cooling and an additional 99 g. (total, 101 g. 1 mole) of 1,2,4-triazole-3(5)-thiol is added in small portions over the course of 30-60 minutes. The rate of addition and the extent of cooling by the water bath are so regulated as to keep the temperature close to 45 7° all during the addition. The water bath is kept cold by the occasional addition of ice. 

The reactions of enamines as 1,3-dipolarophiles provide the most extensive examples of applications to heterocyclic syntheses. Thus the addition of aryl azides to a large number of cyclic (596-598) and acyclic (599-602) enamines has led to aminotriazolines which could be converted to triazoles with acid. Particular attention has been given to the direction of azide addition (601,603). While the observed products suggest a transition state in which the development of charges gives greater directional control than steric factors, kinetic data and solvent effects (604-606) speak against zwitterionic intermediates and support the usual 1,3-dipolar addition mechanism. 

Type 125 0x0 forms are characteristic for 5-hydroxy-l,2,4-triazoles [76AHC(S1), pp. 379, 388], These forms are additionally stabilized by an electron-withdrawing substituent, R = NO2 (98MRC343). Both hydroxy and 0x0 tautomers are capable of forming stable dimers owing to the in-termolecular hydrogen bonds (126 and 127 [76AHC(S1), pp. 377,379). 

Azidofurazans and -furoxans undergo dipolar cycloaddition reactions with unsaturated compounds, in some cases regiospecifically. Thus, reaction of 3-amino-4-azidofurazan with l-morpholinyl-2-nitroethene (toluene, reflux, 70 hours) gives 4-nitro-l,2,3-triazole 204 in 87% yield (99MI1, 000KGS406). Cycloaddition of the same azide to alkynes was accomplished by formation of a mixture of position isomers 205 and 206. Regiospecific addition was observed only in singular cases... 

The triazole 76, which is more accurately portrayed as the nucleophilic carbene structure 76a, acts as a formyl anion equivalent by reaction with alkyl halides and subsequent reductive cleavage to give aldehydes as shown (75TL1889). The benzoin reaction may be considered as resulting in the net addition of a benzoyl anion to a benzaldehyde, and the chiral triazolium salt 77 has been reported to be an efficient asymmetric catalyst for this, giving the products (/ )-ArCH(OH)COAr, in up to 86% e.e. (96HCA1217). In the closely related intramolecular Stetter reaction e.e.s of up to 74% were obtained (96HCA1899). 

The addition of phenyl azide to diacetylene in benzene at 20-70°C has been performed (79KGS849). Depending on the amount of phenyl azide, 1-phenyl-4(5)-ethynyl-1,2,3-triazoles (96) and 4,4 -di(l-phenyl-1,2,3-triazoles) (97) were obtained in 64 and 55.5% yield, respectively. 

The addition of benzyl azide to monosubstituted diacetylenes initially proceeds at the terminal acetylene bond to form two regioisomeric 4- and 5-ethynyl-1,2,3-triazoles 98 and 99 along with minor amounts of the corresponding diadducts (81ZOR741 82ZOR1619). 

Friesner and coworkers investigated the 1,3-dipolar addition of phenyl azide 60 to carbon-carbon double bonds forming l-phenyl-4,5-dihydro-l//-l,2,3-triazoles (61 and 62) (Scheme 39) [99JPC(A)1276]. 

Chloro-2-(3-methyl-4H-1,2,4-triazol-4-yDbenzophenone (Oxidation of 7solution prepared by adding sodium periodate (2 g) to a stirred suspension of ruthenium dioxide (200 mg) in water (35 ml). The mixture became dark. Additional sodium periodate 18 g) was added during the next 15 minutes. The ice-bath was removed and the mixture was stirred for 45 minutes. Additional sodium periodate (4 g) was added and the mixture was stirred at ambient temperature for 18 hours and filtered. The solid was washed with acetone and the combined filtrate was concentrated in vacuo. The residue was suspended in water and extracted with methylene chloride. The extract was dried over anhydrous potassium carbonate and concentrated. The residue was chromatographed on silica... 

Since both oxepin and its valence isomer benzene oxide contain a x-tb-diene structure they are prone to Diels-Alder addition reactions. The dienophiles 4-phenyl- and 4-methyl-4//-l,2,4-triazole-3,5-dione react with substituted oxepins at room temperature to give the 1 1 adducts 7 formed by addition to the diene structure of the respective benzene oxide.149 190,222... 

Occasionally, addition products of 4//-l,2,4-triazole-3,5-diones or diazenedicarboxylic esters and oxepins have been obtained whose formation can be rationalized by an addition to the 2,4-diene system in the oxepin, e.g. formation of 10.190191 In these cases, the primary adduct usually cannot be isolated, because it undergoes a hetero-Cope rearrangement to a tricyclic or bicyclic structure in which the oxepin oxygen has become part of a carbonyl function.190 191,227... 

More recently, Stepanov et al. (1989) investigated the acid-base properties of the zwitterion 3.22 which is obtained in the diazotization of 5-amino-3-nitro-l,2,4-triazole. Under alkaline conditions the (Z)-diazoate dianion 3.23 is formed. It can be isomerized thermally to give the (E)-diazoate dianion 3.24. If the solution of this compound is acidified, the primary addition of a proton takes place at the anionic ring nitrogen yielding 3.25, and subsequently the hydrogen-bond-stabilized (Z)-iso-mer (3.26). Further acidification gives the nitrosoamine (3.27). 

The pK values for azolediazonium ions (Scheme 12-4) refer to the heterolysis of the NH bond, not to the addition of a hydroxy group. Therefore, these heteroaromatic diazo components may react either as a cation (as shown in Scheme 12-4) or as the zwitterion (after loss of the NH proton). Diener and Zollinger (1986) investigated the relative reactivities of these two equilibrium forms (Scheme 12-5) in the azo coupling reaction of l,3,4-triazole-2-diazonium ion with the tri-basic anion of 2-naphthol-3,6-disulfonic acid. 

As the Diels-Alder reactions of 2( lff)-pyrazinones with richly substituted acetylenes can be used to generate diversely substituted pyridines and pyridi-nones, these cyclo additions were investigated under microwave irradiation conditions on the 1,2,3-triazole decorated pyrazinone scaffold. As a proof of concept, the pyrazinones bearing a 1,4-disubstituted-1,2,3-triazole unit, linked via a C-0 bond, were reacted with the symmetrical dienophile dimethyl acetylenedicarboxylate (DMAD), in view of minimizing regioselect-ivity problems (Scheme 28). 

Carbon-carbon triple bonds can also undergo 1,3-dipolar addition." For example, azides give triazoles ... 

More recently, Williams has described the one pot synthesis of 2-substituted oxazoles 11 by the thermolysis of triazole amides 9 the reaction does not proceed photo-chemically.<92TL1033> Although the reaction does not involve addition to a nitrile, it is an interesting application of a diazo compound since the proposed zwitterionic intermediate 10 is a resonance form of a diazo imine, so formally the reaction may be thought of as a thermal decomposition of a diazo imine (Scheme 6). 

Simple 1,2,4-triazole derivatives played a key role in both the synthesis of functionalized triazoles and in asymmetric synthesis. l-(a-Aminomethyl)-1,2,4-triazoles 4 could be converted into 5 by treatment with enol ethers <96SC357>. The novel C2-symmetric triazole-containing chiral auxiliary (S,S)-4-amino-3,5-bis(l-hydroxyethyl)-l,2,4-triazole, SAT, (6) was prepared firmn (S)-lactic acid and hydrazine hydrate <96TA1621>. This chiral auxiliary was employed to mediate the diastereoselective 1,2-addition of Grignard reagents to the C=N bond of hydrazones. The diastereoselective-alkylation of enolates derived from ethyl ester 7 was mediated by a related auxiliary <96TA1631>. 

The most common corrosion inhibitors, which may form protective films on the metal surfaces, are borates, molybdates, nitrates, nitrites, phosphates, silicates, amines, triazoles, and thiazioles (e.g., monoethanolamine, urotropin, thiodiglycol, and mercaptobenzothiazole). The addition of such inhibitors does not effectively protect against corrosion [137]. Some corrosion inhibitors are shown in Figure 14-3. 

In addition to triazole-based biosteres of (382), thiazoles and imidazoles have also been investigated by Lange et al. [311]. The three series of compounds were assessed on their CBi binding affinity and functional activity... 

---