Addition of Aryls

Arylation of alkynes via addition of arylboronic acids to alkynes represents an attractive strategy in organic synthesis. The first addition of arylboronic acids to alkynes in aqueous media catalyzed by rhodium was reported by Hayashi et al. They found that rhodium catalysts associated with chelating bisphosphine ligands, such as 1,4-( /5(diphenyl-phosphino)butane (dppb) and l,l -Z A(diphenylphosphino)ferrocene 

Diphasic systems were found to have a unique effect on the selectivity of the addition of arylboronic acids to alkynes. It was found that the use of [Rh(COD)OH]2 associated with the water-soluble ligand, m-TPPTC, was highly effective for such a reaction in the biphasic water/toluene system (Eq. 4.51). The reaction was completely stereo-and regioselective. In addition, the catalyst did not lose any activity 

---

Success of the reactions depends considerably on the substrates and reaction Conditions. Rate enhancement in the coupling reaction was observed under high pressure (10 kbar)[l 1[. The oxidative addition of aryl halides to Pd(0) is a highly disfavored step when powerful electron donors such as OH and NHt reside on aromatic rings. Iodides react smoothly even in the absence of a... 

Usually, iodides and bromides are used for the carbonylation, and chlorides are inert. I lowever, oxidative addition of aryl chlorides can be facilitated by use of bidcntatc phosphine, which forms a six-membered chelate structure and increa.scs (he electron density of Pd. For example, benzoate is prepared by the carbonylation of chlorobenzene using bis(diisopropylphosphino)propane (dippp) (456) as a ligand at 150 [308]. The use of tricyclohexylphosphine for the carbonylation of neat aryl chlorides in aqueous KOH under biphasic conditions is also recommended[309,310]. 

The reactions of enamines as 1,3-dipolarophiles provide the most extensive examples of applications to heterocyclic syntheses. Thus the addition of aryl azides to a large number of cyclic (596-598) and acyclic (599-602) enamines has led to aminotriazolines which could be converted to triazoles with acid. Particular attention has been given to the direction of azide addition (601,603). While the observed products suggest a transition state in which the development of charges gives greater directional control than steric factors, kinetic data and solvent effects (604-606) speak against zwitterionic intermediates and support the usual 1,3-dipolar addition mechanism. 

Organoboron reagents ate pariictdarly well suited for 1,4-additions of aryl and vinyl groups to enones. Hayasbi et al. developed a highly enantioselective RliQ)/ BlNAP-catalyzed 1,4-addilion of pbenylbotonic add lo cyclic and acyclic enones [24] fSclieme 7.5) and 1-alkenylpbospbonales [25]. 

The electrophilic character of the palladium atom in the complexes formed by oxidative addition of aryl halides and alkenyl halides to palladium(o) complexes can be exploited in useful ways. 

Likewise, addition of aryl-, vinyl-, and alkyllithium reagents to tetrahydro-2-[2-(phcnylsul-fonyl)-2-(trimethylsilyl)ethenyl]-2tf-pyran followed by desilylation gives the. syn-products12 13. 

Carbon-carbon bond formation reactions and the CH activation of methane are another example where NHC complexes have been used successfully in catalytic applications. Palladium-catalysed reactions include Heck-type reactions, especially the Mizoroki-Heck reaction itself [171-175], and various cross-coupling reactions [176-182]. They have also been found useful for related reactions like the Sonogashira coupling [183-185] or the Buchwald-Hartwig amination [186-189]. The reactions are similar concerning the first step of the catalytic cycle, the oxidative addition of aryl halides to palladium(O) species. This is facilitated by electron-donating substituents and therefore the development of highly active catalysts has focussed on NHC complexes. 

The general mechanism of coupling reactions of aryl-alkenyl halides with organometallic reagents and nucleophiles is shown in Fig. 9.4. It contains (a) oxidative addition of aryl-alkenyl halides to zero-valent transition metal catalysts such as Pd(0), (b) transmetallation of organometallic reagents to transition metal complexes, and (c) reductive elimination of coupled product with the regeneration of the zero-valent transition metal catalyst. 

Transition metal complexes that are easy to handle and store are usually used for the reaction. The catalytically active species such as Pd(0) and Ni(0) can be generated in situ to enter the reaction cycle. The oxidative addition of aryl-alkenyl halides can occur to these species to generate Pd(II) or Ni(II) complexes. The relative reactivity for aryl-alkenyl halides is RI > ROTf > RBr > RC1 (R = aryl-alkenyl group). Electron-deficient substrates undergo oxidative addition more readily than those electron-rich ones because this step involves the oxidation of the metal and reduction of the organic aryl-alkenyl halides. Usually... 

The general catalytic cycle for the coupling of aryl-alkenyl halides with alkenes is shown in Fig. 9.6. The first step in this catalytic cycle is the oxidative addition of aryl-alkenyl halides to Pd(0). The activity of the aryl-alkenyl halides still follows the order RI > ROTf > RBr > RC1. The olefin coordinates to the Pd(II) species. The coordinated olefin inserts into Pd—R bond in a syn fashion, p-Hydrogen elimination can occur only after an internal rotation around the former double bond, as it requires at least one /I-hydrogen to be oriented syn perpendicular with respect to the halopalladium residue. The subsequent syn elimination yields an alkene and a hydridopalladium halide. This process is, however, reversible, and therefore, the thermodynamically more stable (E)-alkene is generally obtained. Reductive elimination of HX from the hydridopalladium halide in the presence of a base regenerates the catalytically active Pd(0), which can reenter the catalytic cycle. The oxidative addition has frequently assumed to be the rate-determining step. 

The possible mechanism for the reactions involving stoichiometric amount of preformed Ni(0) complexes is shown in Fig. 9.8. The first step of the mechanism involves the oxidative addition of aryl halides to Ni(0) to form aryl Ni(II) halides. Disproportion of two aryl Ni(II) species leads to a diaryl Ni(II) species and a Ni(II) halide. This diaryl Ni(II) species undergoes rapid reductive elimination to form the biaryl product. The generated Ni(0) species can reenter the catalytic cycle. 

More recently, Curran and Keller found that the (TMSlsSiH-mediated addition of aryl iodides to arenes are facilitated by oxidative rearomatization with oxygen (Reaction 69). Here, AIBN is not necessary for good performance of the reaction. The reaction proceeds well in both inter- and intra-molecular (see above) versions. 

Ketonitriles Preparfx) by Cyanide-Catalyzed CoNJuoArii Addition of Aryl Aldehydes to a,0-UNSATURATED Nitriles... 

CHROMIUM TRIOXIDE-PYRIDINE COMPLEX, preparation in situ, 55, 84 Chrysene, 58,15, 16 fzans-Cinnamaldehyde, 57, 85 Cinnamaldehyde dimethylacetal, 57, 84 Cinnamyl alcohol, 56,105 58, 9 2-Cinnamylthio-2-thiazoline, 56, 82 Citric acid, 58,43 Citronellal, 58, 107, 112 Cleavage of methyl ethers with iodotri-methylsilane, 59, 35 Cobalt(II) acetylacetonate, 57, 13 Conjugate addition of aryl aldehydes, 59, 53 Copper (I) bromide, 58, 52, 54, 56 59,123 COPPER CATALYZED ARYLATION OF /3-DlCARBONYL COMPOUNDS, 58, 52 Copper (I) chloride, 57, 34 Copper (II) chloride, 56, 10 Copper(I) iodide, 55, 105, 123, 124 Copper(I) oxide, 59, 206 Copper(ll) oxide, 56, 10 Copper salts of carboxylic acids, 59, 127 Copper(l) thiophenoxide, 55, 123 59, 210 Copper(l) trifluoromethanesulfonate, 59, 202... 

CYANIDE-CATALYZED CONJUGATE ADDITION OF ARYL ALDEHYDES 4-(3-PYRIDYL)-4-OXOBUTYRONITRILE... 

Chiral diamino carbene complexes of rhodium have been merely used in asymmetric hydrosilylations of prochiral ketones but also in asymmetric addition of aryl boron reagents to enones. 

Example Sometimes copper solves other regioselecL-ivity problems. Addition of aryl Grignard (28) to enone (29) gives the anomalous product (30) in which the electrophile (29) has been attacked at the right atom but the nucleophile (23, arrows) has attacked with the wrong atom. 

Additions of aryl- or alkyllithium reagents to N-silylated formamides 508 give the imines 509 in 55-80% yield [90, 91] some of these imines can subsequently be converted into the corresponding //-lactams by reaction with enolates of alkyl butyrates [92]. Conversion of N-silylated butyrolactam 388 into cyclic Schiff bases such as 390, by reaction with methyl- or butyllithium, via O-silylated butyrolactam 389, is discussed in Section 4.8 (Scheme 5.28). 

After these seminal studies, the use of NHC-Rh systems for the addition of aryl boronic acids to carbonyl compounds became a very fertile area and many groups have reported on variations of this catalytic system [22],... 

Addition of Aryl-, Alkenyl- and Alkynylzinc Reagents to Aldehydes... 

In 1998, Miyaura reported a Rh(acac)(CO)2/dppp-catalyzed addition of aryl or alkenylboronic acids to aldehydes in aqueous organic mixtures under an inert atmosphere (Eq. 8.85).216 The use of electron-rich tri(tm-butyl)phosphine as ligand was found to be beneficial for obtaining good yields of the corresponding aldehyde addition products.217... 

By oxidative addition of aryl sulphides to low-valent nickel complexes, a C—S bond cleavage occurs to form Ni11 thiolate complexes. For example, exposure of diaryl sulphides to [(But3P)3Ni0] leads to oxidative addition, with nickel inserting into the C—S bond (280).814... 

Determination of the rate constant of the oxidative addition of aryl halides with Pd°(PPh3)4 or with the Pd° complexes generated from Pd°(dba)2 and one equivalent of dppp shows that the oxidative addition is slower for ort/zo-substituted aryl halides than for the corresponding non-substituted or meta-substituted aryl halides.870... 

The present reaction may be reasonably explained by the smooth oxidative addition of aryl halides to metallic nickel to give aryl nickel halides, followed by disproportionation to bisarylnickels, which upon reductive elimination afford the dehalogenative coupled products. Providing strong support for this mechanism, the intermediates, arylnickel halide and bisarylnickel (Ar=C F ), were isolated as the phosphine complexes. 

These reactions to form aryl tin bonds could occur by initial oxidative addition of the aryl halide or the distannane. The stoichiometric reaction between [(PPh3)2Pd(Ph)(I)] and Me3SnSnMe3 in the presence of chloride generated good yields of the aryltin product. This result suggests that the reactions occur by initial oxidative addition of aryl halide. 

---