Acyl halides formation

Recently Blum reported that chlorotris(triphenylphosphine) rhodium (XI) is an active catalyst for the decarbonylation of aroyl halides and showed several examples (2). But in this case too, the real catalyst seems to be chlorocarbonylbis(triphenylphosphine)rhodium (XII), which is formed in situ from XI by the stoichiometric reaction with acyl halides. Formation of alkyl halides by decarbonylation of acyl halides can be carried out by the Hunsdiecker reaction, but the reaction is unsatisfactory when applied to aroyl halides. Therefore, the decarbonylation reaction of aroyl halides by the rhodium complex is a new and useful means of introducing halogen onto the aromatic ring. 

The conversion of an aliphatic carboxylic acid into the a-bromo- (or a-chloro ) acid by treatment with bromine (or chlorine) in the presence of a catal3rtic amount of phosphorus tribromide (or trichloride) or of red phosphorus is known as the Hell-Volhard-Zelinsky reaction. The procedure probably involves the intermediate formation of the acyl halide, since it is known that halogens react more rapidly with acyl haUdes than with the acids themselves ... 

The Pd-catalyzed hydrogenoiysis of acyl chlorides with hydrogen to give aldehydes is called the Rosenmund reduction. Rosenmund reduction catalyzed by supported Pd is explained by the formation of an acylpalladium complex and its hydrogenolysis[744]. Aldehydes can be obtained using other hydrides. For example, the Pd-catalyzed reaction of acyl halides with tin hydride gives aldehydes[745]. This is the tin Form of Rosenmund reduction. Aldehydes are i ormed by the reaction of the thio esters 873 with hydrosilanes[746,747]. 

Acyl halides are intermediates of the carbonylations of alkenes and organic-halides. Decarbonylation of acyl halides as a reversible process of the carbo-nylation is possible with Pd catalyst. The decarbonylation of aliphatic acid chlorides proceeds with Pd(0) catalyst, such as Pd on carbon or PdC, at around 200 °C[109,753]. The product is a mixture of isomeric internal alkenes. For example, when decanoyl chloride is heated with PdCF at 200 C in a distillation flask, rapid evolution of CO and HCl stops after I h, during which time a mixture of nonene isomers was distilled off in a high yield. The decarbonylation of phenylpropionyl chloride (883) affords styrene (53%). In addition, l,5-diphenyl-l-penten-3-one (884) is obtained as a byproduct (10%). formed by the insertion of styrene into the acyl chloride. Formation of the latter supports the formation of acylpalladium species as an intermediate of the decarbonylation. Decarbonylation of the benzoyl chloride 885 can be carried out in good yields at 360 with Pd on carbon as a catalyst, yielding the aryl chloride 886[754]. 

The formation of acyl halide-Lewis acid complexes have been observed by several methods. For example, both 1 1 and 1 2 complexes of acetyl chloride, with AICI3 can be observed by NMR spectroscopy. The existence of acylium ions has been demonstrated by X-ray diffraction studies on crystalline salts. For example, crystal structure determinations have been reported for /i-methylphenylacylium and acetylium ions as SbFg salts. There is also a good deal of evidence from NMR measurements which demonstrates that acylium ions can exist in nonnucleophilic solvents. " The positive charge on acylium ions is delocalized onto the oxygen atom. This delocalization is demonstrated in particular by the short O—C bond lengths in acylium ions, which imply a major contribution from the structure having a triple bond ... 

Baddeley and Voss also showed that the aluminium halide-catalysed acylation by acid anhydrides proceeds via the initial formation of the acyl halide, equilibrium (200)... 

In the course of this study, the authors determined /Lvalues for dibenzyl, methyl phenyl, methyl p-nitrophenyl, di-p-tolyl, di-isopropyl and tetramethylene sulphoxides and for diethyl, dipropyl and dibutyl sulphites. The /Lscales are applied to the various reactions or the spectral measurements. The /Lscales have been divided into either family-dependent (FD) types, which means two or more compounds can share the same /Lscale, family-independent (FI) types. Consequently, a variety of /Lscales are now available for various families of the bases, including 29 aldehydes and ketones, 17 carboxylic amides and ureas, 14 carboxylic acids esters, 4 acyl halides, 5 nitriles, 10 ethers, 16 phosphine oxides, 12 sulphinyl compounds, 15 pyridines and pyrimidines, 16 sp3 hybridized amines and 10 alcohols. The enthalpies of formation of the hydrogen bond of 4-fluorophenol with both sulphoxides and phosphine oxides and related derivatives fit the empirical equation 18, where the standard deviation is y = 0.983. Several averaged scales are shown in Table 1588. 

Unsymmetrical as well as symmetrical anhydrides are often prepared by the treatment of an acyl halide with a carboxylic acid salt. The compound C0CI2 has been used as a catalyst. If a metallic salt is used, Na , K , or Ag are the most common cations, but more often pyridine or another tertiary amine is added to the free acid and the salt thus formed is treated with the acyl halide. Mixed formic anhydrides are prepared from sodium formate and an aryl halide, by use of a solid-phase copolymer of pyridine-l-oxide. Symmetrical anhydrides can be prepared by reaction of the acyl halide with aqueous NaOH or NaHCOa under phase-transfer conditions, or with sodium bicarbonate with ultrasound. 

When the reagent is the thiocyanate ion, S-alkylation is an important side reaction (10-43), but the cyanate ion practically always gives exclusive N-alkylation. ° Primary alkyl halides have been converted to isocyanates by treatment with sodium nitrocyanamide (NaNCNN02) and m-chloroperoxybenzoic acid, followed by heating of the initially produced RN(N02)CN. ° When alkyl halides are treated with NCO in the presence of ethanol, carbamates can be prepared directly (see 16-7). ° Acyl halides give the corresponding acyl isocyanates and isothiocyanates. For the formation of isocyanides, see 10-111. 

Formation of Acyl Halides from Carboxylic Acids... 

Acyl imidazolides are more reactive than esters but not as reactive as acyl halides. Entry 7 is an example of formation of a (3-ketoesters by reaction of magnesium enolate monoalkyl malonate ester by an imidazolide. Acyl imidazolides also are used for acylation of ester enolates and nitromethane anion, as illustrated by Entries 8, 9, and 10. (V-Methoxy-lV-methylamides are also useful for acylation of ester enolates. 

Intramolecular acylations are very common, and the normal conditions involving an acyl halide and Lewis acid can be utilized. One useful alternative is to dissolve the carboxylic acid in polyphosphoric acid (PPA) and heat to effect cyclization. This procedure probably involves formation of a mixed phosphoric-carboxylic anhydride.54... 

Cyanuric chloride reacts vigorously and exothermically with DMF after a deceptively long induction period. The 1 1 adduct initially formed decomposes above 60° C with evolution of carbon dioxide and formation of a dimeric unsaturated quaternary ammonium salt. Dimethylformamide is appreciably basic and is not a suitable solvent for acyl halides. 

Scheme 7 comprises the following patterns First, a metallacycle gives rise to ketones by CO insertion and reductive elimination. Next, a nickel hydride inserts an unsaturated substrate L, followed by CO. The acyl intermediate can give rise to reductive elimination with formation of acyl halides or acids and esters by hydrolysis, or it can insert a new ligand with subsequent reductive elimination as before. Alternatively, there may be a new insertion of carbon monoxide with final hydrolysis. Third, an intermediate R—Ni—X is formed by oxidative addition. It can react in several ways It can insert a new ligand L, followed by CO to give an... 

Synthesis of Acyl Nitronates The most general approach to the synthesis of acyl nitronates is based on the reactions of anions of the corresponding AN with acyl halides or carboxylic acid anhydrides in the presence of bases. Here, we will not consider a series of studies, where the formation of intermediate O-acyl nitronates was postulated without conclusive proof or by detection of their decomposition products. 

Studies show that the Zr-bearing bulky ligand is exclusively located in the bottom hemisphere with respect to the plane of the (Z)-enolate. The aldehyde molecule coordinates with the Zr atom and approaches from the same side, adopting a chair-like transition state. This leads to the formation of erythro-aldols (Scheme 3-9 and 23). For lithium enolate, the attack of alkyl or acyl halides in alkylation or acylation occurs directly on the top face of the enolate. 

Peptide bond formation involves activation of the carboxyl group of an amino acid residue, followed by aminolysis of the activated residue by the amino group of a second amino acid residue. Two types of activated molecules are recognized those that are not detectable but are postulated and those that are detectable and can be isolated. Postulated intermediates are necessary to account for the formation of the detectable intermediates. The postulated intermediates are consumed as fast as they are formed, either by aminolysis by an amino group or by nucleophilic attack by an oxygen nucleophile, which produces activated molecules that are also immediate precursors of the peptide. More than one activated compound may be generated by a postulated intermediate. Activated esters, acyl halides and azides, and mixed and symmetrical anhydrides are isolatable activated compounds that are generated from postulated intermediates. Peptides are produced by one of three ways ... 

The reverse reaction in which thioacetamide is initially alkylated and then reacted under phase-transfer catalytic conditions with the acyl halide results in the formation of A-acylthioamidates (Scheme 4.15), with only trace amounts of the S-alkyl thioesters [35], S-Alkyl thioacetates have also been obtained from trifluoro-methylsulphonyloxy compounds upon reaction with potassium thioacetate in the presence of TDA-1 [61]. It is probable that tetraalkylammonium salts would be equally good catalysts. 

In the preceding eqnation, the primary anion-radical gives the l-chloro-2,2,2-trifluoroethyl radical. In vivo, this radical was detected by the spin-trapping method (Poyer et al. 1981). Ahr et al. (1982) had presented additional evidence for the formation of the radical as an intermediate in halo-thane metabolism and identified l-chloro-2,2-difluoroethene as a product of radical stabilization. Metabolytic transformations of l-chloro-2,2-difluoroethene lead to acyl halides, which are relevant to halothane biotoxicity (Guengerich and Macdonald 1993). 

Although the formation of symmetric piperazine-2,5-diones is a well documented transformation (93AHC187), the unsymmetric -ones have been prepared from AAs or their amides with acyl halides, such as pyruvoyl chloride (81RTC73) and a-bromopropionyl bromide (91H923). 

In Friedel-Crafts acylations, an acyl halide, almost always the chloride, in the presence of a Lewis acid is employed to acylate an aromatic ring. The process is initiated by polarization of the carbon-chlorine bond of the acyl chloride, resulting in formation of a resonance-stabilized acylium ion. 

The formation of an acyl halide involves the reaction of a carboxylic acid with a halogen source. The common halogen sources tire compounds like PX3, PXj, ClOCCOCl (oxalyl chloride), or SO.V2> where. Y is a halogen. The most commonly used acyl halides are the chlorides, and the simplistic reaction is RCOOH —> RCOCl. Figure 12-15 illustrates the mechanism using thionyl... 

Acyl halides and anhydrides are important reactants for the formation of other carbonyl compounds, but you don t need to take up valuable brain space with information about any other acyl halide or anhydride reactions at this time. 

---