Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Acrylic emulsion polymers

Kim N, Sudol ED, Friedel P, El-Aasser MS (2003) Poly (vinyl alcohol) stabilization of acrylic emulsion polymers using the miniemulsion approach. Macromolecules 36 5573-5579... [Pg.168]

Acrylic modifiers for cement impact strength and adhesion to substrates are discussed in reference 211. Both water-soluble acryHc and acrylic emulsion polymers are used in tHe ceramic industry7 as temporary7 binders, deflocculants, and additive components in ceramic bodies and glazes (212) (see Ceramics). [Pg.172]

G-Cryl . [Henltol] Acrylic emulsion polymers wstdid resins for inks, coatings, varnishes as grinding vehicle. [Pg.155]

Future directions in acrylic emulsion polymer technology. 650... [Pg.322]

Acrylic and styrene-acrylic emulsion polymers are typically characterized fiar solids content, viscosity and pH. Commercial products range in solids content from about 35 to 65% by weight, and in viscosity from tens to thousands of centipoise. Solids content is determined gravimetrically. Samples are dried to constant weight in a forced-draft oven, typically at 150 °C, and cooled in a desiccator. Viscosity is conveniently detamined using a Brookfield viscometer. For meaningful viscosity comparisons between various samples, the same spindle size and rate of rotation (shear rate) should be used. [Pg.327]

A majority of the acrylic emulsion polymers used in textile and non-woven applications are crosslinked or cured after film formation to provide wet stroigth, solvent resistance and durability to laundering and dry cleaning. As with architectural coatings binders, the principal monomers used are BA, EA and MMA,... [Pg.335]

Future Directions in Acrylic Emulsion Polymer Technology... [Pg.337]

Acrylic emulsion polymers have manufacturing versatility as well pressure equipment is not required for their manufacture, and a large variety of monomer addition and polymerization initiation schemes can be used. Colloidal stability of acrylic emulsion polymers can be achieved through a variety of means to impart surface charge or through polymeric stabilizers. [Pg.729]

The compositions of most acrylic and styrene-acrylic emulsion polymers contain from one to three principal building-block monomers (which generally make up over 90% by weight of the backbone) and one or more of the auxiliary or specialty monomers. The building-block monomers mainly determine the hardness (Tg) and hydrophobicity of the polymer. Styrene and the acrylic monomers form amorphous, random copolymers with a Tg that is roughly proportional to the weight fractions and Tg s of the component monomers. Several mathematical equations have been proposed to describe correlations between Tg s and copolymer composition. Perhaps the most well known is the Fox equation [28] ... [Pg.732]

Figure 1 8 Effects on modulus-temperature behaviour of acrylic emulsion polymers (a) molar mass and crosslinking, (b) cc lymer vs blend of lattices... Figure 1 8 Effects on modulus-temperature behaviour of acrylic emulsion polymers (a) molar mass and crosslinking, (b) cc lymer vs blend of lattices...
Uses Surfactant, emulsifier for latex or paper coatings, carpet backings, textiles, pressure-sensitive adhesives, esp. S/B, styrendacrylic, and acrylic emulsion polymer systems... [Pg.5]

Chem. Descrip. Vinylidene chloride acrylate emulsion polymer Uses Vinylidene chloride acrylate for clear or pigmented coatings Features Exc. adhesion to glass, metal, some engineering plastics exc. clarity and water resist. [Pg.905]

Chem. Descrip. Vinyl acrylic emulsion polymer CAS 25067-01-0... [Pg.926]

Iconol NP-30 Iconol NP-30-70% Iconol NP-40 Iconol NP-40-70% Iconol NP-50 Iconol NP-50-70% Iconol NP-70 Iconol NP-70-70% Iconol NP-100 Iconol NP-100-70% Iconol OP-10 Iconol OP-30 Iconol OP-30-70% Iconol OP-40 Iconol OP-40-70% POLYSTEP B-11 POLYSTEP B-25 POLYSTEP F-4 POLYSTEP E-5 POLYSTEP F-6 emulsifier, acrylic emulsion polymers Abex 3594 emulsifier, acrylic film Nonoxynol-6 phosphate emulsifier, acrylic floor finishes TBEP... [Pg.1510]

Talllcin 5330 surfactant, acrylates Ammodum nonoxynol-4 sulfate surfactant, acrylic copolymers Ammonium laureth-12 sulfate surfactant, acrylic emulsion polymers Abex 3594... [Pg.1617]

Other Applications. The leather finishing area is a traditional stronghold of acrylic emulsion polymers (226). Acrylics are used throughout the entire process of pigskin leather production the nse of acrylics lends uniformity, break improvement, better durability, and snrface resistance while preserving the natural appearance of the pigskin (227). [Pg.167]

See other pages where Acrylic emulsion polymers is mentioned: [Pg.939]    [Pg.172]    [Pg.42]    [Pg.523]    [Pg.939]    [Pg.17]    [Pg.171]    [Pg.171]    [Pg.171]    [Pg.172]    [Pg.208]    [Pg.285]    [Pg.171]    [Pg.171]    [Pg.171]    [Pg.172]    [Pg.63]    [Pg.326]    [Pg.326]    [Pg.335]    [Pg.337]    [Pg.729]    [Pg.729]    [Pg.740]    [Pg.285]    [Pg.102]    [Pg.135]    [Pg.137]    [Pg.162]    [Pg.166]    [Pg.167]    [Pg.43]   
See also in sourсe #XX -- [ Pg.20 ]



SEARCH



Acryl Polymers

Acrylic polymers

Polymers acrylic polymer

Polymers emulsion

© 2024 chempedia.info