Acetamide ethyl

Sulfosuccinimidyl-2-(7-azido-4-methylcoumarin-3-acetamide)ethyl-l,3 -dithiopropionate (SAED) is a photoreactive heterobifunctional crosslinking agent that also contains a fluorescent group (Thermo Fisher). The sulfo-NHS ester end of the reagent reacts with primary amines in proteins and other molecules to form stable amide linkages. The photoreactive end is an AMCA... 

Sulfosuccinimidyl-2-(7-azido-4-methyl coumarin-3-acetamide)ethyl-1,3 -dithiopropionate MW 621.6 23.6 A... 

Several comparative procedures are included. The formation of 1-BENZYLINDOLE and GERANYL CHLORIDE by two different procedures are representative. An interesting comparison of three of the recent adaptations of the Claisen rearrangement on the same substrate is presented in the preparations of N.N-DIMETHYL-5/ -CHOLEST-3-ENE-5-ACETAMIDE, ETHYL-5/S-CHOLEST-3-ENE-5-ACETATE, and 5/9-CHOLEST-3-ENE-5-ACETALDEHYDE. For the utility of the procedure itself as well as for comparison with previously presented syntheses, the preparation and use of triflates in the synthesis of CYCLOBUTANONE is included. 

A one-pot synthesis of 3,5-disubstituted 7-hydroxy-3//-l,2,3-triazolo[4,5-d]pyrimidines (130) has been carried out by using benzyl azide, cyano-acetamide, ethyl or methyl esters of the appropriate carboxylic acid, and sodium ethoxide as catalyst. The reaction proceeds via a 5-amino-l-benzyltriazole-4-carboxamide intermediate (85JHC1607). 7-Amino-3H-l,2,3-triazolo[4,5-d]pyrimidines 133 (R2 = H) were prepared starting from benzyl azide, malononitrile, and an aliphatic or aromatic nitrile, or by reaction of 130 with phosphorus oxychloride followed by amination. Compound 132 was formed in most reactions from two molecules of the 5-amino-4-cyano-l-benzyltriazole intermediate by an intermolecular nucleophilic at-... 

Dimethyl acetamide Ethyl acetate Ethylene glycol Ethylene glycol benzyl ether Heptane Isophorone Isopropyl acetate N-Nitrosodimethylamine PEG-8 oleate PEG-20 oleate... 

Acetamide, Ethyl acetate. Acetyl chloride. Related Acetic anhydride. Acetonitrile,... 

Related Reagents. t-Butyl Trimethylsilylacetate NJi-Dimethyl-2-(trimethylsilyl)acetamide Ethyl 2-(Methyldiphenyl-silyljpropanoate Ethyl Trimethylsilylacetate TrimethylsUyl-acetic Acid Trimethylsilylacetone. 

Related Reagents. f-Butyl Trimethylsilylacetate Dimethyl-2-(trimethylsilyl)acetamide Ethyl (Methyldiphenyl-silyl)acetate Ethyl Trimethylsilylacetate Trimethylsilylacetic Acid Trimethylsilylacetone. 

Related Reagents. r-Butyl Trimethylsilylacetate N,N-T>i-methyl-2-(trimethylsilyl)acetamide Ethyl Lithio(trimethylsilyl)-acetate Ethyl 2-(Methyldiphenylsilyl)propanoate Ethyl Trimethylsilylacetate Lithioacetonitrile... 

Epoxy-4-(epoxyethyl)cyclohexane Af-(4-Ethoxyphenyl)acetamide Ethyl carbamate... 

The acetamide often contains a minute amount of impurity having an odour resembling mice excrement this can be removed by washing with a small volume of a 10 per cent, solution of ethyl alcohol in ether or by recrystallLsation. Dissolve 5 g. of impure acetamide in a mixture of 5 ml. of benzene and 1 5 ml. of dry ethyl acetate warm on a water bath until all is dissolved and cool rapidly in ice or cold water. Filter oflF the crystals, press between Alter paper and dry in a desiccator. The unpleasant odour is absent and the pure acetamide melts at 81°. Beautiful large crystals may be obtained by dissolving the acetamide (5 g.) in warm methyl alcohol (4 ml.), adding ether (40 ml.) and allowing to stand. 

Chapter III. 1 Heptene (111,10) alkyl iodides (KI H3PO4 method) (111,38) alkyl fluorides (KF-ethylene glycol method) (111,41) keten (nichrome wire method) (111,90) ion exchange resin catalyst method for esters (111,102) acetamide (urea method) (111,107) ethyl a bromopropionate (111,126) acetoacetatic ester condensation using sodium triphenylmethide (111,151). 

Ethyl Acetate is allowed to mix with concentrated Ammonia solution for several days to make Acetamide. This is a very attractive method because all the reagents involved are easy to acquire and cheap. 

Figure 20 1 shows the structures of various derivatives of acetic acid (acetyl chlo ride acetic anhydride ethyl thioacetate ethyl acetate and acetamide) arranged m order... 

Peroxide-Ketazine Process. Elf Atochem in France operates a process patented by Produits Chimiques Ugine Kuhhnaim (PCUK). Hydrogen peroxide (qv), rather than chlorine or hypochlorite, is used to oxidize ammonia. The reaction is carried out in the presence of methyl ethyl ketone (MEK) at atmospheric pressure and 50°C. The ratio of H202 MEK NH2 used is 1 2 4. Hydrogen peroxide is activated by acetamide and disodium hydrogen phosphate (117). Eigure 6 is a simplified flow sheet of this process. The overall reaction results in the formation of methyl ethyl ketazine [5921-54-0] (39) and water ... 

The methyl ethyl ketazine forms an immiscible upper organic layer easily removed by decantation. The lower, aqueous phase, containing acetamide and sodium phosphate, is concentrated to remove water formed in the reaction and is then recycled to the reactor after a purge of water-soluble impurities. Organic by-products are separated from the ketazine layer by distillation. The purified ketazine is then hydrolyzed under pressure (0.2—1.5 MPa (2—15 atm)) to give aqueous hydrazine and methyl ethyl ketone overhead, which is recycled (122). The aqueous hydrazine is concentrated in a final distillation column. 

V-m ethyl- aceto acetamide [20306-75-6] bp 96-98 (13 kPa) insecticides, polyester curing... 

A/-(P-hydroxy)ethyl- aceto acetamide [24309-97-5] mp 35—40 animal feed additive... 

The most convenient synthesis of 6-hydroxy-2-pyridones is by the condensation of a P-ketoester, eg, ethyl acetoacetate, with an active methylene compound, eg, malonic ester, cyanoacetic ester, and an amine. The amine can be omitted if an acetamide is used and in some cases this modification results in a higher yield. 

Acetamide [60-35-5] M 59.1, m 81 , pK -1.4, pKl +0.37. Crystd by soln in hot MeOH (0.8mL7g), diltd with Et20 and allowed to stand [Wagner J Chem Educ 7 1135 1930]. Alternate cry sms are from acetone, benzene, chloroform, dioxane, methyl acetate or from benzene-ethyl acetate mixture (3 1 and 1 1). It has also been recrystd from hot water after treating with HCl-washed activated charcoal (which had been... 

The A-substituted derivatives of 4-oxo-4//-pyrido[l,2-n]pyrimidine-3-carboxamides and -3-acetamides and l,6-dimethyl-4-oxo-1,6,7,8-tetrahy-dro-4//-pyrido[l,2-n]pyrimidine-3-carboxamide were prepared by treatment of the appropriate 3-carboxylic acids and acetic acid, first with an alkyl chloroformate in the presence ofNEt3 in CHCI3 below — 10°C, then with an amine (98ACH515). A-Phenethyl and A-[2-(3,4-dimethoxyphenyl)ethyl] derivatives of 6-methyl-6,7,8,9-tetrahydro-4//-pyrido[l, 2-n]pyrimidine-3-acetamide were obtained in the reaction of 6-methyl-6,7,8,9-tetrahydro-4//-pyrido[l,2-n]pyrimidine-3-acetic acid and phenethylamines in boiling xylene under a H2O separator. Hydrazides of 4-oxo-4//- and 4-oxo-6,7,8,9-tetrahydro-4//-pyrido[l, 2-n]pyrimidine-3-acetic acid were prepared from the appropriate ester with H2NNH2 H2O in EtOH. Heating 4-oxo-4//- and 6-methyl-4-oxo-6,7,8,9-tetrahydro-4//-pyrido[l, 2-n]pyrimidine-3-acetic hydrazides in EtOH in the presence of excess Raney Ni afforded fhe appropriafe 4-oxo-6,7,8,9-fefrahydro-4//-pyrido[l,2-n]pyrimidine-3-acefa-mide. In the case of the 4-oxo-4// derivative, in addition to N-N bond... 

---