Nuclear magnetic 13C NMR

The 111 NMR, 13C NMR (NMR - nuclear magnetic resonance), infrared (IR), ultraviolet (UV), and mass spectrometry (MS) data have been reported for the first example 5 of a 2/7-azepin-2-one (2-azatropone). The carbonyl group stretching frequency appeared at 1682 cm 1 in the IR spectrum of the neat material <2000JOC6093>. Further H and 13C NMR spectroscopic data on azepine derivatives have been summarized by Smalley <1997HOU(E9d)108>. 

ADMET polymers are easily characterized using common analysis techniques, including nuclear magnetic resonance ( H and 13C NMR), infrared (IR) spectra, elemental analysis, gel permeation chromatography (GPC), vapor pressure osmometry (VPO), membrane osmometry (MO), thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The preparation of poly(l-octenylene) (10) via the metathesis of 1,9-decadiene (9) is an excellent model polymerization to study ADMET, since the monomer is readily available and the polymer is well known.21 The NMR characterization data (Fig. 8.9) for the hydrogenated versions of poly(l-octenylene) illustrate the clean and selective nature of ADMET. 

Spectroscopy, 490. See also 13C NMR spectroscopy FT Raman spectroscopy Fourier transform infrared (FTIR) spectrometry H NMR spectroscopy Infrared (IR) spectroscopy Nuclear magnetic resonance (NMR) spectroscopy Positron annihilation lifetime spectroscopy (PALS) Positron annihilation spectroscopy (PAS) Raman spectroscopy Small-angle x-ray spectroscopy (SAXS) Ultraviolet spectroscopy Wide-angle x-ray spectroscopy (WAXS)... 

Nuclear magnetic resonance (NMR) spectrometry has seldom been used as a quantitative analytical method but can have some practical importance in the characterization of surfactants [296-298]. 13C-NMR spectrometry has been used for the qualitative and also quantitative analysis of dodecyl, tetradecyl, and cetyl sulfates [299]. H- and, 3C-NMR spectra of sodium dodecyl sulfate are given by Mazumdar [300]. 

A solid-state nuclear magnetic resonance (NMR) experiment was carried out in 4 mm double bearing rotor made from Zr02 on a Bruker DSX 200 MHz spectrometer with resonance frequency at 75.468 MHz. The pulse length was 3.5 ps and the contact time of IH-13C CP was 2-5 ms. 

A study on the effectiveness of the E-plastomers as impact modifiers for iPP was carried out in relation to the traditional modifier EPDM. In this study, the flow properties of the E-plastomer-iPP and EPDM-PP blends were also evaluated. The blends were analyzed by solid-state 13C-nuclear magnetic resonance (NMR) spectroscopy, microscopy (SEM), and DSC. The results showed that E-plastomer-PP and EPDM-PP blends present a similar crystallization behavior, which resulted in a similar mechanical performance of the blends. However, the E-plastomer-PP blend presents lower torque values than the EPDM-PP blend, which indicates a better processibility when E-plastomer is used as an impact modifier for iPP. 

Nuclear Magnetic Resonance Spectra. The 13CNMR spectra of quinoxaline and a dozen 5-substituted quinoxalines have been determined for comparison with those of corresponding naphthalene derivatives.918 Aspects of the 1H, 13C, and 14N NMR spectra of quinoxaline and related heterocycles have been correlated with the Ji-electron densities of the system.419 In contrast with the... 

One of the most promising applications of nuclear magnetic resonance to vitamin Bj.2-chemistry is the use of carbon-13 NMR (145). The use of 13C fourier transform NMR has greatly increased the applicability of 13C NMR in that it permits one to obtain high quality spectra with natural abundance 13C. 

The final reactant/product mixture was analyzed by a Gemini 300 13C nuclear magnetic resonance (NMR) spectrometer using CDC13 as a solvent. 

The presence of four kinds of nuclear magnetic resonance (NMR) observable nuclei ( H, uB, 13C, and 29Si) allows poly(m-carborane-siloxane) to be readily investigated using NMR spectroscopy. In addition, H spin-echo NMR relaxation techniques can provide an insight into polymer segmental chain dynamics and therefore useful information on material viscoelastic characteristics. 

Ab initio calculations using the CHF-GIAO approach on the optimized geometrical configurations of the compounds have also allowed to predict the 111, 13C, and 1SN nuclear magnetic resonance (NMR) spectra of the quinolizidine series. The calculated spectra fit fairly well the experimental data, with the exception of some signals... 

The bulky, stable silenes of Brook et al. (104,122-124,168) and Wiberg et al. (166,167) have been the only systems capable of being studied by nuclear magnetic resonance (NMR) spectroscopy to date. Table III lists the 13C and 29Si chemical shifts and the relevant coupling constants of these compounds. 

Fourier transform infrared (FTIR) spectroscopy, 13C nuclear magnetic resonance (NMR) spectroscopy, ultraviolet-visible (UV-VIS) and fluorescence spectroscopy can be integrated with chromatographic techniques especially in the study of ageing and degradation of terpenic materials. They can be used to study the transformation, depletion or formation of specific functional groups in the course of ageing. 

There are several systematic nuclear magnetic resonance studies of the interaction between the substituents and the protons and ring atoms of five-membered heterocycles. In some 2-substituted furans, thiophenes, selenophenes, and tellurophenes there is a linear correlation between the electronegativity of the chalcogen and several of the NMR parameters.28 As there also is a good correlation between the shifts of the corresponding protons and carbons in the four heterocycles, the shifts of unknown selenophene and tellurophene derivatives can be predicted when those of thiophene are known. This is of special interest for the tellurophene derivatives, since they are difficult to synthesize. In the selenophene series, where a representative set of substituents can be introduced in the 2- as well as in the 3-position, the correlation between the H and 13C shifts and the reactivity parameters according to Swain and Lupton s two-parameter equation... 

---