Zirconium oxide resistance

Corrosion Resistance. Zirconium is resistant to corrosion by water and steam, mineral acids, strong alkaUes, organic acids, salt solutions, and molten salts (28) (see also Corrosion and corrosion control). This property is attributed to the presence of a dense adherent oxide film which forms at ambient temperatures. Any break in the film reforms instantly and spontaneously in most environments. 

Zirconium oxide is fused with alurnina in electric-arc furnaces to make alumina—zirconia abrasive grains for use in grinding wheels, coated-abrasive disks, and belts (104) (see Abrasives). The addition of zirconia improves the shock resistance of brittle alurnina and toughens the abrasive. Most of the baddeleyite imported is used for this appHcation, as is zirconia produced by burning zirconium carbide nitride. 

Hafnium-free zirconium is particularly weU-suited for these appHcations because of its ductiHty, excellent oxidation resistance in pure water at 300°C, low thermal neutron absorption, and low susceptibiHty to radiation. Nuclear fuel cladding and reactor core stmctural components are the principal uses for zirconium metal. 

Solid Oxide Fuel Cell In SOF(7s the electrolyte is a ceramic oxide ion conductor, such as vttriurn-doped zirconium oxide. The conduetKity of this material is 0.1 S/ern at 1273 K (1832°F) it decreases to 0.01 S/ern at 1073 K (1472°F), and by another order of magnitude at 773 K (932°F). Because the resistive losses need to be kept below about 50 rn, the operating temperature of the... 

The effects on oxidation resistance of copper as a result of adding varying amounts of one or more of aluminium, beryllium, chromium, manganese, silicon, zirconium are described in a number of papers Other authors have investigated the oxidation of copper-zincand copper-nickel alloys , the oxidation of copper and copper-gold alloys in carbon dioxide at 1 000°C and the internal oxidation of various alloys ". ... 

The oxidation rate of niobium in air from 800°C to above 1000°C can be decreased by alloying e.g. with hafnium, zirconium, tungsten, molybdenum, titanium or tantalum . However, the preferred fabricable alloys still require further protection by coating . Ion implantation improves thermal oxidation resistance of niobium in oxygen below 500°C . 

The oxidation-resistant SiC fiber was prepared from polycarbosilane containing Zr(OC4H9)4 by the same process as that used for the aforementioned tita-nia/silica fiber, except that the calcination was performed in Ar atmosphere at 1400 °C. In this case, the polycarbosilane and Zr(OC4H9)4 were effectively converted into SiC-based bulk ceramic and zirconium oxide (cubic zirconia). Before the conversion, bleed-out of the zirconium compound proceeded effectively. AES depth analysis of the fiber surface showed an increase in the concentration of zirconium towards the surface. This construction was confirmed by the TEM image of the cross-section near the fiber surface. This indicates the direct production of a SiC-based fiber covered with a Zr02 surface layer, which... 

Zirconium oxide (ZrO ) is the most common compound of zirconium found in nature. It has many uses, including the production of heat-resistant fabrics and high-temperature electrodes and tools, as well as in the treatment of skin diseases. The mineral baddeleyite (known as zirconia or ZrO ) is the natural form of zirconium oxide and is used to produce metallic zirconium by the use of the Kroll process. The KroU process is used to produce titanium metal as well as zirconium. The metals, in the form of metaUic tetrachlorides, are reduced with magnesium metal and then heated to red-hot under normal pressure in the presence of a blanket of inert gas such as helium or argon. 

Acid-resistant stoneware is given a salt glaze and is resistant to all acids except hydrofluoric acid. The acid resistance can be increased by adding zirconium oxide or phosphates, the alkali resistance by adding barium oxide, magnesium oxide or chromium oxide. 

Zr02+ 15 mole%CaO calcia-stabilized zirconium oxide 17.3.7 defect structure and mechanism of ionic conduction 17.3.7.3 oxygen ion resistivity of polycrystalline material 17.3.7... 

The MF membranes are usually made from natural or synthetic polymers such as cellulose acetate (CA), polyvinylidene difiuoride, polyamides, polysulfone, polycarbonate, polypropylene, and polytetrafiuoroethylene (FIFE) (13). Some of the newer MF membranes are ceramic membranes based on alumina, membranes formed during the anodizing of aluminium, and carbon membrane. Glass is being used as a membrane material. Zirconium oxide can also be deposited onto a porous carbon tube. Sintered metal membranes are fabricated from stainless steel, silver, gold, platinum, and nickel, in disks and tubes. The properties of membrane materials are directly reflected in their end applications. Some criteria for their selection are mechanical strength, temperature resistance, chemical compatibility, hydrophobility, hydrophilicity, permeability, permselectivity and the cost of membrane material as well as manufacturing process. 

---