XANES absorption fine structure

EXAFS is part of the field of X-ray absorption spectroscopy (XAS), in which a number of acronyms abound. An X-ray absorption spectrum contains EXAFS data as well as the X-ray absorption near-edge structure, XANES (alternatively called the near-edge X-ray absorption fine structure, NEXAFS). The combination of XANES (NEXAFS) and EXAFS is commonly referred to as X-ray absorption fine structure, or XAFS. In applications of EXAFS to surface science, the acronym SEXAFS, for surface-EXAFS, is used. The principles and analysis of EXAFS and SEXAFS are the same. See the article following this one for a discussion of SEXAFS and NEXAFS. 

Figure 2 Molybdenum K-edge X-ray absorption spectrum, ln(i /i ) versus X-ray energy (eV), for molybdenum metal foil (25- jjn thick), obtained by transmission at 77 K with synchrotron radiation. The energy-dependent constructive and destructive interference of outgoing and backscattered photoelectrons at molybdenum produces the EXAFS peaks and valleys, respectively. The preedge and edge structures marked here are known together as X-ray absorption near edge structure, XANES and EXAFS are provided in a new compilation of literature entitled X-rsy Absorption Fine Structure (S.S. Hasain, ed.) Ellis Norwood, New York, 1991.

The X-ray absorption fine structure (XAFS) methods (EXAFS and X-ray absorption near-edge structure (XANES)) are suitable techniques for determination of the local structure of metal complexes. Of these methods, the former provides structural information relating to the radial distribution of atom pairs in systems studied the number of neighboring atoms (coordination number) around a central atom in the first, second, and sometimes third coordination spheres the... 

Time-resolved X-ray absorption is a very different class of experiments [5-7]. Chemical reactions are triggered by an ultrafast laser pulse, but the laser-induced change in geometry is observed by absorption rather than diffraction. This technique permits one to monitor local rather than global changes in the system. What one measures in practice is the extended X-ray absorption fine structure (EXAFS), and the X-ray extended nearedge strucmre (XANES). 

X-ray absorption spectroscopy combining x-ray absorption near edge fine structure (XANES) and extended x-ray absorption fine structure (EXAFS) was used to extensively characterize Pt on Cabosll catalysts. XANES Is the result of electron transitions to bound states of the absorbing atom and thereby maps the symmetry - selected empty manifold of electron states. It Is sensitive to the electronic configuration of the absorbing atom. When the photoelectron has sufficient kinetic energy to be ejected from the atom It can be backscattered by neighboring atoms. The quantum Interference of the Initial... 

These conclusions from the infrared reflectance spectra recorded with Pt and Pt-Ru bulk alloys were confirmed in electrocatalysis studies on small bimetallic particles dispersed on high surface area carbon powders.Concerning the structure of bimetallic Pt-Ru particles, in situ Extended X-Ray Absorption Fine Structure (EXAFS>XANES experiments showed that the particle is a true alloy. For practical application, it is very important to determine the optimum composition of the R-Ru alloys. Even if there are still some discrepancies, several recent studies have concluded that an optimum composition about 15 to 20 at.% in ruthenium gives the best results for the oxidation of methanol. This composition is different from that for the oxidation of dissolved CO (about 50 at.% Ru), confirming a different spatial distribution of the adsorbed species. 

NEXAFS Near-edge X-ray absorption fine structure (see XANES)... 

In general, several spectroscopic techniques have been applied to the study of NO, removal. X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), nuclear magnetic resonance (NMR), extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) are currently used to determine the surface composition of the catalysts, with the aim to identify the cationic active sites, as well as their coordinative environment. 

In order to gain information on the environments of certain atoms in dissolved species, in melts or in solids (crystalline or noncrystalline), which are not accessible to diffraction studies for one reason or another, X-ray absorption spectrometry (XAS) can be applied, with the analysis of the X-ray absorption near-edge structure (XANES) and/or the extended X-ray absorption fine structure (EXAFS). Surveys of these methods are available 39,40 a representative study of the solvation of some mercury species, ElgX2, in water and dimethylsulfoxide (DMSO) by EXAFS and XANES, combined with quantum-chemical calculations, has been published.41... 

The most prevalent technique exploiting synchrotron radiation is X-ray absorption spectroscopy (XAS, also called X-ray absorption fine structure, XAFS). Two related types of experiments are conducted X-ray absorption near-edge spectroscopy (XANES), which probes the initial absorption edge and related nearby structure, and... 

Temperature-Programmed Extended X-ray Absorption Fine-Structure (EXAFS) and X-ray Absorption Near-Edge (XANES) Spectroscopies... 

X-ray absorption fine structure (XAFS) technique, 74 464-465 X-ray absorption near edge structure (XANES), 24 72... 

XANES) is limited to the first 30 to 40 eV past the absorption edge, whereas the extended x-ray absorption fine structure (EXAFS) covers the photon energy range from about 40 eV to about 1000 eV past the edge. This division is indeed justified, as the research community observes that the interpretation of XANES spectra is different and substantially more comphcated than that of EXAES spectra (11). 

Although a number of secondary minerals have been predicted to form in weathered CCB materials, few have been positively identified by physical characterization methods. Secondary phases in CCB materials may be difficult or impossible to characterize due to their low abundance and small particle size. Conventional mineral identification methods such as X-ray diffraction (XRD) analysis fail to identify secondary phases that are less than 1-5% by weight of the CCB or are X-ray amorphous. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM), coupled with energy dispersive spectroscopy (EDS), can often identify phases not seen by XRD. Additional analytical methods used to characterize trace secondary phases include infrared (IR) spectroscopy, electron microprobe (EMP) analysis, differential thermal analysis (DTA), and various synchrotron radiation techniques (e.g., micro-XRD, X-ray absorption near-eidge spectroscopy [XANES], X-ray absorption fine-structure [XAFSJ). 

In 2006, Lobinski et al.1 reported on the imaging and speciation analysis of trace elements to study the element distribution, oxidation state, metal site and metal structure in biological environments using mass spectrometric techniques (LA-ICP-MS, SIMS, MALDI-MS) and non-mass-spectrometric techniques such as micro-PIXE (proton induced X-ray emission), XANES (X-ray absorption near edge structure) and EXAFS (extended X-ray absorption fine structure) -the latter two techniques are very sensitive due the use of a more intense synchrotron beam.1... 

---