Wood effect pigments

Additives. Because of their versatility, imparted via chemical modification, the appHcations of ethyleneimine encompass the entire additive sector. The addition of PEI to PVC plastisols increases the adhesion of the coatings by selective adsorption at the substrate surface (410). PEI derivatives are also used as adhesion promoters in paper coating (411). The adducts formed from fatty alcohol epoxides and PEI are used as dispersants and emulsifiers (412). They are able to control the viscosity of dispersions, and thus faciHtate transport in pipe systems (413). Eatty acid derivatives of PEI are even able to control the viscosity of pigment dispersions (414). The high nitrogen content of PEIs has a flame-retardant effect. This property is used, in combination with phosphoms compounds, for providing wood panels (415), ceUulose (416), or polymer blends (417,418) with a flame-retardant finish. 

Equalizers can be either pigmented or dye-type stains used to tone down or lighten dark areas of wood prior to finishing. Although it is not as effective, equalizing is sometimes done in place of bleaching. Because there are no white dyes, white pigment or pead essence is usually incorporated with the dyes to achieve the desired look. 

Adhesives. Poly(vinyl alcohol) is used as a component in a wide variety of general-purpose adhesives to bond ceUulosic materials, such as paper and paperboard, wood textiles, some metal foils, and porous ceramic surfaces, to each other. It is also an effective binder for pigments and other finely divided powders. Both fully and partially hydrolyzed grades are used. Sensitivity to water increases with decreasing degree of hydrolysis and the addition of plasticizer. Poly(vinyl alcohol) in many appHcations is employed as an additive to other polymer systems to improve the cohesive strength, film flexibiUty, moisture resistance, and other properties. It is incorporated into a wide variety of adhesives through its use as a protective coUoid in emulsion p olymerization. 

Other spherical fillers include carbon black. This has several roles particularly in combination with elastomers, e.g., black pigment, anti-oxidant and UV stabiliser, reinforcing filler, and an electrical conductor when used at 60% concentration. Wood flour is particularly effective in phenol/formaldehyde and melamine or urea/formaldehyde thermoset resins because the phenolic lignin component in the wood reacts with the methylol groups (-CH2OH) in the growing polymer. 

It is useful to evaluate the depth of pigmentation a Wood s lamp can be used to do this, as shown in Figure 30.10. The worse the pigmentation appears when exposed to the Wood s light (i.e. the more patchy the skin appears), the more superficial the melanin is and the treatment will soon take effect. Superficial pigmentation does not need to be treated with phenol, and can be treated effectively with less aggressive peels. 

TABLE 16.9 Effects of pigments and antioxidants on fading of wood-poiypropylene composites [11]... 

---