Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Weakly organized carbons

Streitwieser et al. [160] and BordweU et al. [161] used the lyate ions of organic solvents such as cyclohexylamine and dimethyl sulfoxide in the determination of the C—H acidity of weak organic carbon acids. Using super base systems such as alkali metal salts of cyclohexylamine [i.e. lithium and cesium cyclohexylamides) [160] and dimethyl sulfoxide (sodium dimsyl) [161] in an excess of these non-HBD solvents, relative acidity scales for weak carbon acids have been established. In this way, values for the ionization of over a thousand Bronsted acids in dimethyl sulfoxide have... [Pg.77]

Because tertiary alcohols are so readily converted to chlorides with hydrogen chlo nde thionyl chlonde is used mainly to prepare pnmary and secondary alkyl chlondes Reactions with thionyl chlonde are normally carried out m the presence of potassium carbonate or the weak organic base pyndme... [Pg.165]

Most weak base anion exchangers adsorbweak organic acids such as formic acid [64-18-6] and acetic acid [64-19-7] but do not remove weak organic acids such as carbonic acid [463-79-6] or siHcic acid [7669-41 ]. [Pg.372]

Because the solution is capable of absorbing one mole of carbon monoxide per mole of cuprous ion, it is desirable to maximize the copper content of the solution. The ammonia not only complexes with the cuprous ion to permit absorption but also increases the copper solubiUty and thereby permits an even greater carbon monoxide absorption capacity. The ammonia concentration is set by a balance between ammonia vapor pressure and solution acidity. Weak organic acids, eg, formic, acetic, and carbonic acid, are used because they are relatively noncorrosive and inexpensive. A typical formic acid... [Pg.54]

Chemo-Trenn A process for absorbing ammonia, carbon dioxide, hydrogen sulfide, and other undesirable gases from coal gas by absorption in a warm solution of a salt of a weak organic acid such as sodium cresylate. Invented by H. Bahr at I.G. Farbenindustrie, Germany, in 1938. [Pg.62]

Groundwater. Alachlor has a high potential to leach to groundwater due to its weak capacity to adsorb onto organic carbon in soil (U.S. EPA, 1986). [Pg.1544]

Extraction can be nsed for separation or isolation of the analyte from the sample matrix or vice versa as well as a preconcentration method. Extraction of metal ions is based on the reaction of weak organic acids with metal ions that give nncharged complexes that are highly solnble in organic solvents as ethers, hydrocarbons, ketones and polychlorinated species (generally chloroform and carbon tetrachloride). The efficacy of the extraction is mainly dependent on the extent to which solntes distribnte themselves between two immiscible solvents. The amonnts of analyte can be determined spectrophotometrically as well as with other available analytical methods. [Pg.529]

Liming an acidic lake is similar to the process many people use to maintain a pH balance in their soil for lawn maintenance. Plants have an optimum pH range in which they strive. Acidic conditions often develop in soils for several reasons. Rain tends to leach away basic ions, weak organic acids develop from the carbon dioxide produced by decaying organic matter, and strong acids, such as nitric acid, can form when ammonium fertilizers oxidize. To neutralize these acids, different forms of lime such as quicklime, CaO, and slaked lime, Ca(OH)2, are used to neutralize the acid and increase the pH of the soil. Table 13.9 shows how much fertilizer is wasted when applied to... [Pg.166]

The reactivity of the organosilanes65 and organostannanes66 towards electrophiles is dependent on the characteristics of the organic ligands. Typically, the alkylsilanes and alkylstannanes are unreactive, which is a consequence of the weakly polarized carbon-silicon and carbon-tin cr-bonds (C8-—Ms+). However, allylsilanes67 and allylstannanes are highly reactive to electrophiles because of extensive ct-tt (C—Si or C—Sn) conjugation in the ally metals and the 0-carbonium ion stabilization effect of the metal center. Consequently, electrophiles add exclusively with allylic transposition. [Pg.155]

Since pentachlorophenol is a weak add, and both soil pH and organic carbon content are available, the method Bintein and Devillers (1994) described can be used to estimate Kd. The method uses the following expression ... [Pg.201]

In contrast to the case of HMPC, most lipases hydrolyze the racemic acetate of CPBA 9 to give a mixture of the insecticidally active (S)-CPBA 2 and the (R)-acetate 1J). Thus, the desired (S)-CPBA J2 could be separated from the (R)-acetate 10 by means of a continuous counter-current extraction using n-heptane solvent at 80°C. However, it is important to utilize the recovered (R)-acetate W for an efficient process. Fortunately, since the proton of the asymmetric carbon of the cyanohydrin acetate is labile, the antipodal (R)-acetate is easily racemized by treatment with weak organic base such as triethylamine without any side reactions. The racemized acetate J9 thus obtained was recycled as shown in Figure 6. Therefore, all of the racemic acetate 9 was converted to the desired (S)-CPBA 2 in this recycling process. The (S)-CPBA 2 obtained was esterified with (S)-2-(4-chlorophenyl)-3-methylbutyryl chloride to produce the most insecticidally active stereoisomer V2 of fenvalerate, namely esfenvalerate. The relative biocidal activities between... [Pg.370]


See other pages where Weakly organized carbons is mentioned: [Pg.423]    [Pg.413]    [Pg.413]    [Pg.423]    [Pg.413]    [Pg.413]    [Pg.222]    [Pg.733]    [Pg.822]    [Pg.848]    [Pg.875]    [Pg.392]    [Pg.127]    [Pg.74]    [Pg.87]    [Pg.355]    [Pg.96]    [Pg.311]    [Pg.247]    [Pg.565]    [Pg.409]    [Pg.258]    [Pg.8]    [Pg.144]    [Pg.275]    [Pg.286]    [Pg.159]    [Pg.72]    [Pg.279]    [Pg.1329]    [Pg.64]    [Pg.173]    [Pg.272]    [Pg.178]   
See also in sourсe #XX -- [ Pg.413 ]

See also in sourсe #XX -- [ Pg.413 ]

See also in sourсe #XX -- [ Pg.413 ]




SEARCH



© 2024 chempedia.info