Viton, laboratory gloves

Shut off all possible sources of ignition. Instruct others to keep a safe distance. Wear breathing apparatus, eye protection, laboratory coat, and Viton rubber gloves.16 Cover the spill with a 1 1 1 mixture by weight of sodium carbonate or calcium carbonate, clay cat litter (bentonite), and sand. Place mixture in an evaporating dish in the fume hood to evaporate. Ventilate the spill area thoroughly to dispel vapor.17... 

Small Quantities. Wear Viton rubber gloves,16 laboratory coat, and eye protection. Work in the fume hood. For each 0.05 mol (3.8 g, 3.0 mL) of carbon disulfide to be destroyed, use 670 mL of sodium hypochlorite (bleach) or a mixture of 55 g of 65% calcium hypochlorite in 220 mL of water. Place the hypochlorite in flask equipped with dropping funnel, stirrer, and thermometer, and add the carbon disulfide dropwise such that the reaction temperature is maintained between 20 and 30°C (to avoid volatilizing of the carbon disulfide). When addition is complete, continue stirring for 2 hours or until a clear, homogeneous solution remains (perhaps containing traces of oily by-products). The reaction mixture can be washed into the drain.18... 

Wear PVA or Viton gloves,18 laboratory coat, and eye protection. Avoid breathing vapor. Recycle by distillation (in a fume hood) or place waste in halogenated solvent-disposal container for disposal by burning. Dissolve the compound in a nonchlorinated flammable solvent and spray into a furnace with afterburner and scrubber.20,21... 

Wear goggles, laboratory coat, and Viton gloves.4 Sweep up spills into metal container. Follow waste disposal. Wash site with soap solution.1,5... 

---