Vibrating sample magnetometer magnetization measurements

Du] XRD, DSC, SEM, TEM, magnetization measurements with a vibrating sample magnetometer Magnetic properties (M, H )... 

Measurements. Infra-red spectra for the region 600-4000 cm-1 were measured with a Perkin-Elmer Model 710B spectrometer on samples pressed in KBr pellets. Magnetic susceptibilities were measured with a vibrating sample magnetometer (Princeton Applied Physics) as previously described.(4)... 

The magnetic susceptibility, measured with a vibrating sample magnetometer (Foner), calibrated with nickel (purity 99.99% — specific susceptibility at 293°K 55 cgs/g) at 293 0.2°K with a magnetic field of 17,700 G, is 101.39 0.20 10"6 cgs/g. This value may be compared with 101.65 0.20 10 6 cgs/g for manganese diphosphate prepared by thermal decomposition of the ammonium manganese phosphate. The value calculated from Reference 7 is 101.96 0.20 cgs/g. 

The magnetization measurements have been carried out using an apparatus for magnetic measurements, constructed on the principle of a vibrating-sample magnetometer in the temperature range of 300-700 K in permanent magnetic fields up to 12 kOe under gas pressure up to 12 atm. 

Magnetic measurements were performed at temperatures between 2 and 300 K., in a vibrating sample magnetometer using a physical property measurement system (quantum design). 

Magnetic measurements were carried out on XeCPtE X. using a Vibrating Sample Magnetometer and those on all other materials were made using a SQUID magnetometer as previously outlined [12],... 

Magnetic measurements were made, with a 0.2265 g sample, over the temperature range 5 to 98.5 K using a Princeton Applied Research Corporation vibrating sample magnetometer. The magnetic standard was HgCo(NCS)4. 

The hysteresis loops at different temperatures T and directions of external magnetic field He, have been measured in the above films by vibration sample magnetometer LDJ-9500. These magnetization curves are almost rectangular in the... 

---