Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Using Parameter Declarations

Another option is to declare parameters and use these in the case statement. [Pg.122]

The advantage of this approach is that the state encodings are described explicitly in one place and can be changed easily. If either the parameter declarations or the integer values are used directly, a synthesis system [Pg.122]


The most influential and determining factors in decision making are the quantitative financial analyses, which are used to declare the winner as the best use of the firm s assets. The criteria used most often are the net present value, NPV, and the internal rate of return, IRR. A financial plan begins with a time horizon, such as 5 years, and the forecast of a number of parameters of expenditures and incomes for each of the years, on ... [Pg.331]

In the two last steps, fabric displacements and its deformation angle named and respectively declaring their dynamic nature. Dynamic lateral forces T, dynamic friction coefUfcient and dynamic normal load F may be calculated using parameters such as and 0 related to the fabric deformation, through Equations (9)-(l 1). [Pg.125]

The PARAMETER section is used to declare the constants (parameters) of a MODEL. We can have real and integer, scalar, or array parameters. [Pg.370]

We create a new process and we define Unit, as the process. Set is used to declare the parameters and Assign to provide values for variables ... [Pg.408]

In standard Pascal, although only in a few implementations of the language, a function or procedure name may also be a parameter to a sub-prograrn. The constants, types, and variables used in a sub-program, as well as those in the main program, must be declared (see following declarations). [Pg.125]

Role decoupling A variable or parameter contains an object or a reference to one. Frequently, the component in which the declaration occurs uses only some of the facilities provided by that object. [Pg.289]

Declare every parameter and variable to be an abstract class or interface that specifies only the operations used by that variable, and no more. (A less extreme version is to permit some sharing of interfaces between variables.)... [Pg.689]

There is a fixed relationship between these declared elements that is allowed to vary within certain defined parameters and can be used for reference to... [Pg.156]

Use GREGPLUS s default declaration, IDSIGN(0 0), to choose an optimal INEXT value for parameter and (optionally) 0-function estimation for each model. All estimable parameters for each model are then considered in choosing INEXT, without further specification of IDSIGN. [Pg.224]

If the alternate hypothesis is accepted at the detection phase, estimation of change by PCD method is initiated by reducing the forgetting factor to a small value at the detection instant. This will cause the filter to converge quickly to the new values of model parameters. Shewhart charts for each model parameter are used for observing the new identified values of the model parameters. At this point the out-of-control decision made at the detection phase can be reassessed. If the identified values of the parameters are inside the range defined by the null hypothesis, then the detection decision can be reversed and the alarm is declared false. [Pg.29]

Next, it was declared that the comparison of calculations with selected experiments cannot be used as a universal criterion for model development and selection of rate constants, or should be restricted and at least performed very carefully. The values of the kinetic parameters were taken from independent measurements, theoretical calculations, or semi-empirical estimations. So, the invariability of rate constants for the description of any particular experiments was accepted as the one of the main principle. [Pg.189]

The arguments are a list of (zero, one, or more) parameters to be passed into or out of the subroutine, except when the parameters in question have been declared Public, see section 10. lg. We have already encountered numerous subroutines in sections 10.5, 10.6, and 10.7. For instance, in section 10.7 we used the subroutines WLS0( ) and WLS1( ) to assign a numerical value to p (of either 0 or 1) for use in the subsequent subroutine WeightedLeastSquares(p), while the latter in turn farmed out its matrix operations to the subroutines Transpose(Ml,rl,cl,Mout), Multiply(Ml,rl,cl,M2,c2, Mout), and Invert(Ml,rl,n,Mout). The use of Public parameters was illustrated in section 10.9. [Pg.474]

The most important datasheet parameter is the ripple current rating. This is typically stated in Amperes RMS at 120 Hz and 105°C. It essentially means that if the ambient temperature is at the maximum rating of 105°C, we can pass a (low frequency) current waveform with the stated RMS, and in doing so we will get the stated life. The declared life figure is typically 2000 hours to 10,000 hours under these conditions. Yes there are lower grade 85°C capacitors available, but they are rarely used, as they can hardly meet typical life requirements at high ambients. [Pg.450]


See other pages where Using Parameter Declarations is mentioned: [Pg.122]    [Pg.122]    [Pg.237]    [Pg.113]    [Pg.291]    [Pg.17]    [Pg.138]    [Pg.485]    [Pg.102]    [Pg.131]    [Pg.97]    [Pg.846]    [Pg.129]    [Pg.186]    [Pg.190]    [Pg.195]    [Pg.196]    [Pg.95]    [Pg.224]    [Pg.223]    [Pg.220]    [Pg.133]    [Pg.74]    [Pg.87]    [Pg.111]    [Pg.228]    [Pg.29]    [Pg.276]    [Pg.154]    [Pg.190]    [Pg.6]    [Pg.51]    [Pg.87]    [Pg.108]    [Pg.144]    [Pg.43]   


SEARCH



Declaration

Parameter declaration

© 2024 chempedia.info