Units of measure for energy

Joule a unit of measurement for energy 1 calorie = 4.184 joules. 

Joule Unit of measurement for energy or work (one joule = one coulomb flowing across a potential of 1V for 1 s)... 

The rate of H2 production by one unit of photobioreactor s volume is not useful for estimation of strain capabilities or for measurements of efficiency of light energy conversion. However, it is useful unit of measurements for optimization of hydrogen production by particular photobioreactor. From practical point of view it does not matter how much cells are in the photobioreactor or how much hydrogen is produced by one unit of illuminated surface. The rate of hydrogen production by the whole photobioreactor is of first importance. For a comparison of different photobioreactors it is better to express rate of hydrogen photoproduction per unit of its volume. So, it is practical unit for estimation of actual hydrogen photoproduction. 

The reason for usiiig the units of Wh for energy input to the compressor is that compressors are powered by elecmiciiy, and eiecaticity consumption is measured (even in the United States)... 

Shielding effectiveness varies with the shielding material. The unit of measure for the attenuation properties of materials is half-value thickness. One half-value thickness will cut the energy level of radiation arriving at the material to one half as it leaves the material after passing through it. The amount of radiation absorbed, 7 , and the amount transmitted, Rt, are given by... 

Table 33-8 lists a classification of work by severity. Some work involves higher activity levels than other work. Associated with level of severity is the typical rate of oxygen consumption and calories burned. Units of measure for the rate at which people bum energy are kcal/min or Btu/hr. 

Enthalpy It is a thermodynamic potential. Enthalpy is a measure of the total energy of a thermodynamic system. It includes the internal energy. The total enthalpy, H, of a system cannot be measured directly. Thus, change in enthalpy. Ml, is a more useful quantity than its absolute value. The change A/f is positive in endothermic reactions, and negative in exothermic processes. The unit of measurement for enthalpy in the International System of Units (SI) is the joule, but other historical, conventional units are still in use, such as the British thermal unit and the calorie. 

As the reference state for all components in the reactions is defined as an ideal gas at 25°C (298.15K) and 1.01325 bar, the value that must be used for f° is 1.01325 bar. If another unit of measurement for pressure is used, the reference pressure must be changed correspondingly so that the activity becomes independent of pressure. If a component is a solid, such as carbon in carbon formation, the activity, a, is unity, since the reference state for the Gibbs free energy of carbon is also defined as the solid state. 

Gray (Gy) A unit of measurement for the amount of energy absorbed in a material. 

The determination of equilibria is done theoretically via the calculation of free energies. In practice, the concept of fugacity is used for which the unit of measurement is the bar. The equation linking the fugacity to the free energy is written as follows >... 

The quantity of a gas can be indicated by way of its mass or its weight in the units of measure normally used for mass or weight. In practice, however, the product of p V is often more interesting in vacuum technology than the mass or weight of a quantity of gas. The value embraces an energy dimension and is specified in millibar liters (mbar I) (Equation 1.7). Where the nature of the gas and its temperature are known, it is possible to use Equation 1.7b to calculate the mass m for the quantity of gas on the basis of the product of p V ... 

On the other hand, efficient use of resource also should be discussed using physical units of measures as well as usage of energy. However the equipment materials such as basic metals are less substitutable than energy because each metal has inherent values. Since there is no common physical unit of measure to evaluate the material usage, the investment cost for each piece of equipment is used as a substitute in this paper. Consequently, the total investment cost should be minimized from the standpoint of resource conservation. The investment cost of each piece of equipment is correlated with the size of the equipment based on the logarithmic relationship. 

Table III.3. Lowest rotational energy levels and expectation values for the squares of the angular momentum components (measured in units of h) for ethylene oxide...

X-rays also generally have energies measured in units of keV for astronomical and elemental analyses, and occupy wavelengths between 5 x 10 and 1 X 10 m. Orbiting x-ray observatories include the Chandra X-ray Observatory, the XMM-Newton, and the recently launched Suzaku (Astro-E2) observatory. X-rays are produced by the intense gravitational interaction of gas falling into such objects as neutron stars and black holes. Another source of x-rays are supernova remnants. 

---