Ultrasound mechanism

Liu, Y, Yang, H., and Sakanishi, A. (2006). Ultrasound mechanical gene transfer into plant cells by sonoporation. Biotechnol. Adv. 24(1) 1-16. 

Biological Effects of Ultrasound Mechanisms and Clinical Implications (1983)... 

NCRP Report No. 74. Biological Effects of Ultrasound Mechanisms and Clinical Applications. National Council on Radiation Protection and Measurements Bethesda, MD, 1983. 

Sonochemistry is strongly affected by a variety of external variables, including acoustic frequency, acoustic intensity, bulk temperature, static pressure, ambient gas, and solvent (47). These are the important parameters which need consideration in the effective appHcation of ultrasound to chemical reactions. The origin of these influences is easily understood in terms of the hot-spot mechanism of sonochemistry. 

Sonochemistry is also proving to have important applications with polymeric materials. Substantial work has been accomplished in the sonochemical initiation of polymerisation and in the modification of polymers after synthesis (3,5). The use of sonolysis to create radicals which function as radical initiators has been well explored. Similarly the use of sonochemicaHy prepared radicals and other reactive species to modify the surface properties of polymers is being developed, particularly by G. Price. Other effects of ultrasound on long chain polymers tend to be mechanical cleavage, which produces relatively uniform size distributions of shorter chain lengths. 

Implantable valves, particularly mechanical valves which continue to encroach on tissue valves, are unique. Methods such as valvuloplasty, mitral valve repair, or use of ultrasound are unlikely to reduce the number of valve replacements into the twenty-first century. Valve selection remains in the hands of the surgeon because of the critical nature of the procedure. If anything goes wrong, the result can be catastrophic to the patient. Cost of a valve, from 3000— 4000, is a relatively small part of the cost of open-heart surgery which can mn as high as 30,000. Growth of the cardiovascular valve market has slowed in the United States with the decline of the threat of rheumatic fever. 

Ultrasound frequencies can be introduced into the walls of the vacuum system. If a source of ultrasound is placed on the wall of an ultrahigh vacuum system, a large hydrogen peak is observed. Related phenomena, presumably from frictional effects, are observed if the side of a vacuum system is tapped with a hammer a desorption peak can be seen. Mechanical scraping of one part on another also produces desorption. 

External Control. The use of external control to govern the release of dmgs from dehvery systems has largely been experimental. A number of mechanisms have been explored, and include external sources such as electrical currents, magnetism, ultrasound, temperature changes, and irradiation. 

Pd4oCu4oP2o, Pd5oCu3oP2o, and Pd6oCu2oP20 alloys were measured by resonant ultrasound spectroscopy (RUS). In this technique, the spectrum of mechanical resonances for a parallelepiped sample is measured and compared with a theoretical spectrum calculated for a given set of elastic constants. The true set of elastic constants is calculated by a recursive regression method that matches the two spectra [28,29]. 

The two other foam sensors mentioned above are ultrasound and rotating disks. The ultrasound sensor is a transmitter and receiver mounted opposite to each other and operating at 25—40 kHz. In the bioreactor, the waves are absorbed by the foam and the signal is generated. The rotational disk foam sensor is a mechanical foam breaker which is used by increasing the rotational resistance. 

Discuss and compare the mechanisms of energy transfer using high-pressure steam, microwaves and ultrasound. Discuss the role and limitations of solvents for carrying out a chemical reaction using these energy sources. 

In liquid-solid extraction (LSE) the analyte is extracted from the solid by a liquid, which is separated by filtration. Numerous extraction processes, representing various types and levels of energy, have been described steam distillation, simultaneous steam distillation-solvent extraction (SDE), passive hot solvent extraction, forced-flow leaching, (automated) Soxh-let extraction, shake-flask method, mechanically agitated reflux extraction, ultrasound-assisted extraction, y -ray-assisted extraction, microwave-assisted extraction (MAE), microwave-enhanced extraction (Soxwave ), microwave-assisted process (MAP ), gas-phase MAE, enhanced fluidity extraction, hot (subcritical) water extraction, supercritical fluid extraction (SFE), supercritical assisted liquid extraction, pressurised hot water extraction, enhanced solvent extraction (ESE ), solu-tion/precipitation, etc. The most successful systems are described in Sections 3.3.3-3.4.6. Other, less frequently... 

---