Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Twin-screw extruders intermeshing corotating

FIG. 18-50 Intermeshing corotating twin screw extruder (a) drive motor, (h) gearbox, (c) feed port, (d) barrel, (e) assembled rotors, (f) vent, (g) barrel valve, (h) kneading paddles, ( ) conveying screws, (/) splined shafts, (k) blister rings, (APV Chemical Machinery, Inc.)... [Pg.1649]

These two-phase polymers are generated in an optimized single-stage process using a corotating, close-intermeshing, twin-screw extruder. [Pg.114]

Fig. 12. Schematic representation of intermeshing corotating twin-screw extruder. Fig. 12. Schematic representation of intermeshing corotating twin-screw extruder.
Fig. 14. Partially filled channel of intermeshing, corotating twin-screw extruder. Mass transfer occurs firom the films on the screw and the barrel and from the surface of the nip. Fig. 14. Partially filled channel of intermeshing, corotating twin-screw extruder. Mass transfer occurs firom the films on the screw and the barrel and from the surface of the nip.
Mack, M., Corotating Intermeshing Twin-Screw Extruder Berstorff s System, Chapter 5 in Plastics Compounding Equipment and Processing, Todd, D.B. (Ed.), Hanser Publishers, Munich (1998)... [Pg.385]

F. Busby, T. W. McCullough, K. R. Hugues, and R. O. Kirk, Melting of Homopolymers in Corotating, Intermeshing Twin-screw Extruders, SPE ANTEC Tech. Papers, 54, 3571 (1996). [Pg.228]

W. Szydlowski and J. L. White, An Improved Theory of Metering in an Intermeshing Corotating twin-screw extruder, Adv. Polym. Technol., 7, 177 (1987). [Pg.317]

COROTATING, FULLY INTERMESHING TWIN SCREW EXTRUDERS 575... [Pg.575]

Twin-screw extruder Dimensionless calculations of throughput and pressure gradients for flow of non-Newtonian fluids in screw and kneading disk elements of a modular intermeshing self-wiping corotating twin-screw extruder, as well as the temperature rise. Chen and White, 1992, 1993... [Pg.598]

The first patent on the precursor of the TSE dates from 1869. However, the first commercial CORI for handling polymers was marketed 70 years later. Several intermeshing counter-rotating twin screw extruders (ICRR) were developed in the 1920-30 s. After the 2nd World War, the corotating, fully intermeshing TSE (CORI) started... [Pg.609]

A schematic representation of the tracking of color particles is shown in Figure 22.10. The flow situation being described in this figure corresponds to the flow in fully filled conveying elements of a corotating intermeshing twin screw extruder. In essence, what happens in the depicted flow problem is that a polymeric flow takes place in... [Pg.447]


See other pages where Twin-screw extruders intermeshing corotating is mentioned: [Pg.1357]    [Pg.114]    [Pg.78]    [Pg.79]    [Pg.81]    [Pg.82]    [Pg.100]    [Pg.658]    [Pg.234]    [Pg.272]    [Pg.167]    [Pg.2]    [Pg.85]    [Pg.275]    [Pg.281]    [Pg.2344]    [Pg.4]    [Pg.499]    [Pg.598]    [Pg.598]    [Pg.600]    [Pg.447]    [Pg.511]    [Pg.214]    [Pg.215]    [Pg.178]    [Pg.182]    [Pg.39]    [Pg.9]    [Pg.811]    [Pg.940]    [Pg.953]    [Pg.954]   
See also in sourсe #XX -- [ Pg.345 ]




SEARCH



COROTATING

Closely intermeshing corotating twin screw extruders

Corotating Screws

Corotating twin-screw extruder

Corotational

INTERMESH

Intermeshed

Intermeshing

Intermeshing screws

Intermeshing twin-screw extruders

Screw extruders

Twin screw

Twin-screw extruder

© 2024 chempedia.info