Tungsten salts reduction

Chemical routes involving the use of tungsten salts have been reported. W2C was claimed to be formed by the pyrolysis of an organometallic complex containing cyclopentadiene and carbonyl groups.8 The W2C formed was useful for ceramic applications such as wear resistant surfaces and cutting tools. The same phase was also prepared by the reduction of WC14 with sodium triethylborohydride.9 The material was formed as 1-5 nm-sized crystallites as shown by SEM and TEM. 

Reduction to Solid Metal. Metals having very high melting points caimot be reduced in the Hquid state. Because the separation of a soHd metallic product from a residue is usually difficult, the raw material must be purified before reduction. Tungsten and molybdenum, for instance, are prepared by reduction of a purified oxide (WO, MoO ) or a salt, eg, (NH2 2 G4, using hydrogen. A reaction such as... 

Salts containing pentavalent tungsten may be obtained by the reduction of alkaU tungstate in concentrated hydrochloric acid. Salts of types M(I)2(W0C1 ) (green), M(I)(WOCl (brown-yeUow), and M(I)(WOCl 2 ) h ve been isolated. Thiocyanato and bromo salts are also known. 

The route to carbene initiation for systems catalyzed solely by transition metal salts (55, 54), or their combinations with Lewis acids such as A1C13 (55), is not well established. Nevertheless, some evidence suggests reduction of the metal by the olefinic substrate (55). Zero-valent (56) and hexavalent (57, 55) tungsten complexes that promote metathesis when activated by UV radiation are the least-understood metathesis systems. 

Lanthanum in purified metallic state may be obtained from its purified oxide or other salts. One such process involves heating the oxide with ammonium chloride or ammonium fluoride and hydrofluoric acid at 300° to 400° C in a tantalum or tungsten crucible. This is followed by reduction with alkali or alkaline earth metals at 1,000°C under argon or in vacuum. 

Reduction of WO with thiocyanic acid leads to colored species which have been used for tungsten analysis.193 The color of these species are pH dependent and the structures of some of them are still uncertain. The following sequence of equilibria have been suggested on the basis of several isolated amine salts (equations 7-11).88,194 Of these species, it is believed that the... 

A number of attempts have been made over the years to develop reproducible synthetic routes to six- and seven-coordinate isocyanide complexes of molybdenum and tungsten. Two of the older methods, namely, the reaction of the hexacarbonyls with halogens in the presence of an isocyanide (775,116) or reactions of the salt Ag4Mo(CN)8 with isocyanides (74), have given six- and seven-coordinate products. Recently, however, the discovery of the reductive or nonreductive cleavage of multiple metal - metal bonds in dinuclear group VIA compounds by isocyanides has provided a facile route to the synthesis of a variety of homoleptic and related isocyanide complexes of these metals in reasonable yields. 

Owing to the slow rates of diffusion of the cations, the direct solid-state reaction of the oxides Cr2 03 and MO at an elevated temperature is not a good preparation of divalent metal chromium(III) oxides. They can be prepared by more elaborate methods, such as controlled reduction of dichromates MCr207,1 reaction of dichromium tungsten oxide Cr2W06 with a molten divalent metal fluoride2 at 1400°, pyrolysis of complexes,3 and pulverization of slurries containing Cr2 03 and a divalent metal salt.4... 

---