Transition metals general properties

The Al alloys, mainly with a lanthanide and a late transition metal, generally exhibit good mechanical properties. 

The physical and chemical properties are less well known for transition metals than for the alkaU metal fluoroborates (Table 4). Most transition-metal fluoroborates are strongly hydrated coordination compounds and are difficult to dry without decomposition. Decomposition frequently occurs during the concentration of solutions for crysta11i2ation. The stabiUty of the metal fluorides accentuates this problem. Loss of HF because of hydrolysis makes the reaction proceed even more rapidly. Even with low temperature vacuum drying to partially solve the decomposition, the dry salt readily absorbs water. The crystalline soflds are generally soluble in water, alcohols, and ketones but only poorly soluble in hydrocarbons and halocarbons. 

Physical and Chemical Properties. The (F)- and (Z)-isomers of cinnamaldehyde are both known. (F)-Cinnamaldehyde [14371-10-9] is generally produced commercially and its properties are given in Table 2. Cinnamaldehyde undergoes reactions that are typical of an a,P-unsaturated aromatic aldehyde. Slow oxidation to cinnamic acid is observed upon exposure to air. This process can be accelerated in the presence of transition-metal catalysts such as cobalt acetate (28). Under more vigorous conditions with either nitric or chromic acid, cleavage at the double bond occurs to afford benzoic acid. Epoxidation of cinnamaldehyde via a conjugate addition mechanism is observed upon treatment with a salt of /-butyl hydroperoxide (29). 

The hexagonal-close-packed (hep) metals generally exhibit mechanical properties intermediate between those of the fee and bcc metals. For example Zn encounters a ductile-to-brittle transition whereas Zr and pure Ti do not. The latter and their alloys with a hep structure remain reasonably ductile at low temperatures and have been used for many applications where weight reduction and reduced heat leakage through the material have been important. However, small impurities of O, N, H, and C can have a detrimental effect on the low temperature ductihty properties of Ti and its alloys. 

Attempts to classify carbides according to structure or bond type meet the same difficulties as were encountered with hydrides (p. 64) and borides (p. 145) and for the same reasons. The general trends in properties of the three groups of compounds are, however, broadly similar, being most polar (ionic) for the electropositive metals, most covalent (molecular) for the electronegative non-metals and somewhat complex (interstitial) for the elements in the centre of the d block. There are also several elements with poorly characterized, unstable, or non-existent carbides, namely the later transition elements (Groups 11 and 12), the platinum metals, and the post transition-metal elements in Group 13. 

The purity of ionic liquids is a key parameter, especially when they are used as solvents for transition metal complexes (see Section 5.2). The presence of impurities arising from their mode of preparation can change their physical and chemical properties. Even trace amounts of impurities (e.g., Lewis bases, water, chloride anion) can poison the active catalyst, due to its generally low concentration in the solvent. The control of ionic liquid quality is thus of utmost importance. 

The general understanding of the electronic structure and the bonding properties of transition-metal silicides is in terms of low-lying Si(3.s) and metal-d silicon-p hybridization. There are two dominant contributions to the bonding in transition-metal compounds, the decrease of the d band width and the covalent hybridization of atomic states. The former is caused by the increase in the distance between the transition-metal atoms due to the insertion of the silicon atoms, which decreases the d band broadening contribution to the stability of the lattice. 

These compounds are generally believed to have square pyramidal structures (X-ray, PPr3) [157d] and have typical spectroscopic properties of transition-metal hydrides (IrHCl2(PBu2Me)2 i/(Ir—H) 1998 cm-1). 

The simplest transition metal carbonyls are mononuclear of the type M(CO)x, in other words those with only one metal atom. They are hydrophobic but soluble to some extent in nonpolar liquids, such as n-butane or propane. The dinuclear carbonyls are more complex but have the same general characteristics as the mononuclear carbonyls. The carbonyls, which are or could be used in CVD, are listed in Table 3.4 with some of their properties. 

Several patents dealing with the use of volatile metal amidinate complexes in MOCVD or ALD processes have appeared in the literature.The use of volatile amidinato complexes of Al, Ga, and In in the chemical vapor deposition of the respective nitrides has been reported. For example, [PhC(NPh)2]2GaMe was prepared in 68% yield from GaMes and N,N -diphenylbenzamidine in toluene. Various samples of this and related complexes could be heated to 600 °C in N2 to give GaN. A series of homoleptic metal amidinates of the general type [MIRCfNROilnl (R = Me, Bu R = Pr, BuO has been prepared for the transition metals Ti, V, Mn, Fe, Co, Ni, Cu, Ag, and La. The types of products are summarized in Scheme 226. The new compounds were found to have properties well-suited for use as precursors for atomic layer deposition (ALD) of thin films. 

The subjects of structure and bonding in metal isocyanide complexes have been discussed before 90, 156) and will not be treated extensively here. A brief discussion of this subject is presented in Section II of course, special emphasis is given to the more recent information which has appeared. Several areas of current study in the field of transition metal-isocyanide complexes have become particularly important and are discussed in this review in Section III. These include the additions of protonic compounds to coordinated isocyanides, probably the subject most actively being studied at this time insertion reactions into metal-carbon bonded species nucleophilic reactions with metal isocyanide complexes and the metal-catalyzed a-addition reactions. Concurrent with these new developments, there has been a general expansion of descriptive chemistry of isocyanide-metal complexes, and further study of the physical properties of selected species. These developments are summarized in Section IV. 

As pure elements, almost all the transition metals are solids that conduct heat and electricity and are malleable and ductile. Although they share these general properties, transition metals display variations in other properties that can be traced to their different numbers of valence electrons. 

---