Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Transition metal inactive

However, in olefin polymerization by two-component catalysts during polymerization not only active transition metal-polymer bonds are formed, but also inactive aluminum-polymer ones, as a result of the transfer process with the participation of a co-catalyst (11, 162-164). The aluminum-polymer bonds are quenched by tritiated alcohol according to the scheme (25), so an additional tagging of the polymer occurs. The use of iodine (165, 166) as a quenching agent also results in decomposing inactive metal-polymer bonds. [Pg.196]

Numerous quantum mechanic calculations have been carried out to better understand the bonding of nitrogen oxide on transition metal surfaces. For instance, the group of Sautet et al have reported a comparative density-functional theory (DFT) study of the chemisorption and dissociation of NO molecules on the close-packed (111), the more open (100), and the stepped (511) surfaces of palladium and rhodium to estimate both energetics and kinetics of the reaction pathways [75], The structure sensitivity of the adsorption was found to correlate well with catalytic activity, as estimated from the calculated dissociation rate constants at 300 K. The latter were found to agree with numerous experimental observations, with (111) facets rather inactive towards NO dissociation and stepped surfaces far more active, and to follow the sequence Rh(100) > terraces in Rh(511) > steps in Rh(511) > steps in Pd(511) > Rh(lll) > Pd(100) > terraces in Pd (511) > Pd (111). The effect of the steps on activity was found to be clearly favorable on the Pd(511) surface but unfavorable on the Rh(511) surface, perhaps explaining the difference in activity between the two metals. The influence of... [Pg.85]

Transition metal oxides, rare earth oxides and various metal complexes deposited on their surface are typical phases of DeNO catalysts that lead to redox properties. For each of these phases, complementary tools exist for a proper characterization of the metal coordination number, oxidation state or nuclearity. Among all the techniques such as EPR [80], UV-vis [81] and IR, Raman, transmission electron microscopy (TEM), X-ray absorption spectroscopy (XAS) and NMR, recently reviewed [82] for their application in the study of supported molecular metal complexes, Raman and IR spectroscopies are the only ones we will focus on. The major advantages offered by these spectroscopic techniques are that (1) they can detect XRD inactive amorphous surface metal oxide phases as well as crystalline nanophases and (2) they are able to collect information under various environmental conditions [83], We will describe their contributions to the study of both the support (oxide) and the deposited phase (metal complex). [Pg.112]

A chiral diphosphine ligand was bound to silica via carbamate links and was used for enantioselective hydrogenation.178 The activity of the neutral catalyst decreased when the loading was increased. It clearly indicates the formation of catalytically inactive chlorine-bridged dimers. At the same time, the cationic diphosphine-Rh catalysts had no tendency to interact with each other (site isolation).179 New cross-linked chiral transition-metal-complexing polymers were used for the chemo- and enantioselective epoxidation of olefins.180... [Pg.261]

Attempts to synthesize transition metal alkyl compounds have been continuous since 1952 when Herman and Nelson (1) reported the preparation of the compound C H6>Ti(OPri)3 in which the phenyl group was sigma bonded to the metal. This led to the synthesis by Piper and Wilkinson (2) of (jr-Cpd)2 Ti (CH3)2 in 1956 and a large number of compounds of titanium with a wide variety of ligands such as ir-Cpd, CO, pyridine, halogen, etc., all of which were inactive for polymerization. An important development was the synthesis of methyl titanium halides by Beerman and Bestian (3) and Ti(CH3)4 by Berthold and Groh (4). These compounds show weak activity for ethylene polymerization but are unstable at temperatures above — 70°C. At these temperatures polymerizations are difficult and irreproduceable and consequently the polymerization behavior of these compounds has been studied very little. In 1963 Wilke (5) described a new class of transition metal alkyl compounds—x-allyl complexes,... [Pg.264]

Compounds of the type Zr(7r-Cpd)2, Ti(Tr-Cpd)2, and Cr(CaH6)2, were found to be completely inactive with all monomers whereas a significant number of transition metal allyl compounds were found to have weak activity for ethylene polymerization. The latter results are summarized in Table I. Despite the fact that many transition metal allyl compounds are unstable above 0°C, in the presence of monomer, the metal allyl structure... [Pg.266]

The compounds of the type L2L1Mn+[CH2M (CH3) ]n, where M is a transition metal, M is Si, Ge and Sn, and L2Li are ligands such as CO, 7r-Cpd, etc., have been synthesized by Collier, Lappert, and Truelock (22). These, like the x-allyl compounds, were inactive for polymerization (Table V). When the ligands CO and x-Cpd were removed, however, the isoleptic compounds Mn+[CH2M/(CH3) were found to be weak polymerization catalysts (16, 28). [Pg.278]

As with other first-row transition metals, copper complexes are not expected to be satisfactory singlet oxygen photogenerators, because of the rapid deactivation of excited states in the presence of partially filled d-orbitals. The exceptional case of the copper(II) benzochlorin iminium salt ((18), M = Cu) has already been referred to (Section 9.22.5.6) this showed bioactivity, although the nickel(II) complex ((18), M = Nin) was inactive.195... [Pg.978]

Metal-deactivating antioxidants. Transition metal compounds decompose hydroperoxides with the formation of free radicals, thereby increasing the rate of oxidation. Such an enhanced oxidation can be slowed down by the addition of a compound that interacts with metal ions to form complexes that are inactive with respect to hydroperoxides. Diamines, hydroxy acids, and other bifunctional compounds exemplify this type of antioxidants. [Pg.490]

Direct free radical inhibitors suppress free radical formation by reacting with free radicals to form new inactive radicals (Reactions (1) and (2)) or chelating catalytically active transition metals to form inactive complexes ... [Pg.848]

Glycerol hydrogenolysis has also been illustrated over transition metals impregnated on silica. Some metals, such as Co and Pt, appear inactive for glycerol conversion, while others, such as Rh, Pd, Ir and, especially, Ru are active but lack the... [Pg.245]

Ylide formation, and hence X-H bond insertion, generally proceeds faster than C-H bond insertion or cyclopropanation [1176], 1,2-C-H insertion can, however, compete efficiently with X-H bond insertion [1177]. One problem occasionally encountered in transition metal-catalyzed X-H bond insertion is the deactivation of the (electrophilic) catalyst L M by the substrate RXH. The formation of the intermediate carbene complex requires nucleophilic addition of a carbene precursor (e.g. a diazocarbonyl compound) to the complex Lj,M. Other nucleophiles present in the reaction mixture can compete efficiently with the carbene precursor, or even lead to stable, catalytically inactive adducts L M-XR. For this reason carbene X-H bond insertion with substrates which might form a stable complex with the catalyst (e.g. amines, imidazole derivatives, thiols) often require larger amounts of catalyst and high reaction temperatures. [Pg.194]

These reactions have been extensively studied for optically inactive compounds of silicon and first row transition-metal carbonyls. ... [Pg.83]

Silicon and germanium hydrides react with cobalt, manganese and rhenium carbonyls affording complexes having a silicon (or germanium)-metal bond. These reactions, described previously for inactive compounds have been used in the synthesis of optically active silyl and germyl-transition metals ... [Pg.85]


See other pages where Transition metal inactive is mentioned: [Pg.2422]    [Pg.66]    [Pg.153]    [Pg.1169]    [Pg.406]    [Pg.187]    [Pg.196]    [Pg.53]    [Pg.201]    [Pg.317]    [Pg.172]    [Pg.106]    [Pg.110]    [Pg.525]    [Pg.183]    [Pg.123]    [Pg.276]    [Pg.80]    [Pg.155]    [Pg.32]    [Pg.102]    [Pg.459]    [Pg.75]    [Pg.364]    [Pg.461]    [Pg.826]    [Pg.840]    [Pg.30]    [Pg.285]    [Pg.158]    [Pg.475]    [Pg.1505]    [Pg.440]    [Pg.271]    [Pg.36]    [Pg.314]   
See also in sourсe #XX -- [ Pg.141 ]




SEARCH



Inactive

© 2024 chempedia.info