Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Complex transition metal oxides

Zhang, Y.C., Kaneko. M., Uchida, K.. Mizusaki, J. and Tagawa, H. (2001) Solid electrolyte CO2 sensors with lithium-ion conductor and Li transition metal complex oxide as solid reference electrode./. Electrochem. Soc., 148 (8). H81-4. [Pg.476]

Polystyrene-based resins have been used widely as supports for metal complex catalysts and other reactive species. These polymers, however, have a drawback in their limited thermo-oxidative stability [1,2]. The scope for application is therefore restricted, particularly in polymer-supported transition metal complex oxidation catalysts [3]. Consequently there is a need for the development of polymer supports with a much higher intrinsic thermo-oxidative stability. Polybenzimidazoles and polyimides are likely candidates in this respect. [Pg.957]

Pd-cataly2ed reactions of butadiene are different from those catalyzed by other transition metal complexes. Unlike Ni(0) catalysts, neither the well known cyclodimerization nor cyclotrimerization to form COD or CDT[1,2] takes place with Pd(0) catalysts. Pd(0) complexes catalyze two important reactions of conjugated dienes[3,4]. The first type is linear dimerization. The most characteristic and useful reaction of butadiene catalyzed by Pd(0) is dimerization with incorporation of nucleophiles. The bis-rr-allylpalladium complex 3 is believed to be an intermediate of 1,3,7-octatriene (7j and telomers 5 and 6[5,6]. The complex 3 is the resonance form of 2,5-divinylpalladacyclopentane (1) and pallada-3,7-cyclononadiene (2) formed by the oxidative cyclization of butadiene. The second reaction characteristic of Pd is the co-cyclization of butadiene with C = 0 bonds of aldehydes[7-9] and CO jlO] and C = N bonds of Schiff bases[ll] and isocyanate[12] to form the six-membered heterocyclic compounds 9 with two vinyl groups. The cyclization is explained by the insertion of these unsaturated bonds into the complex 1 to generate 8 and its reductive elimination to give 9. [Pg.423]

For many species the effective atomic number (FAN) or 18- electron rule is helpful. Low spin transition-metal complexes having the FAN of the next noble gas (Table 5), which have 18 valence electrons, are usually inert, and normally react by dissociation. Fach normal donor is considered to contribute two electrons the remainder are metal valence electrons. Sixteen-electron complexes are often inert, if these are low spin and square-planar, but can undergo associative substitution and oxidative-addition reactions. [Pg.170]

NMR, 3, 542 oxidation, 3, 546 phosphorescence, 3, 543 photoelectron spectra, 3, 542 photolysis, 3, 549 reactions, 3, 543-555 with alkenes, 3, 50 with alkynes, 3, 50 with IH-azepines, 3, 552 with azirines, 3, 554 with cyclobutadiene, 3, 551 with cyclopropenes, 3, 550 with dimethylbicyclopropenyl, 3, 551 with heterocyclic transition metal complexes, 7, 28 29... [Pg.852]

Transition metal complexes can be reduced to unusually low oxidation states either with or without bond cleavage, e.g. ... [Pg.78]

The coordination chemistry of SO2 has been extensively studied during the past two decades and at least 9 different bonding modes have been established.These are illustrated schematically in Fig. 15.26 and typical examples are given in Table 15.17.1 It is clear that nearly all the transition-metal complexes involve the metals in oxidation state zero or -bl. Moreover, SO2 in the pyramidal >7 -dusters tends to be reversibly bound (being eliminated when... [Pg.701]

Pyridine 1-oxide, like pyridine, can act as a ligand in transition metal complexes, but unfortunately good stability constants are not known. However, Shupack and Orchin have found that the C===C stretching frequency of the ethylene ligand in trans-ethylene pyridine 1-oxide dichloroplatinum(II) varies linearly with the pA and hence with the C7-value (ct+ or a, respectively) of substituents in the pyridine oxide. The data for the above reaction series are included in Table V. [Pg.236]

Monodentate dipolarophiles such as acrolein, methacrolein, and a-bromoacrolein could be successfully utilized in the l ,J -DBFOX/Ph-transition metal complex-catalyzed asymmetric nitrone cycloadditions [76]. The reactions of N-benzylideneani-line N-oxide with acrolein in the presence of the nickel(II) aqua complex R,R-DBF0X/Ph-Ni(C104)2 3H20 (10mol%) and MS 4 A produced a mixture of two regioisomers (5-formyl/4-formyl regioisomers ca 3 1). However, enantio-... [Pg.274]

Click Coached Problems for a self-study module on formules end oxidation numbers in transition metal complexes. [Pg.545]

Transition-metal complexes such as [Rh(CO)2Cl]2,204 Rh(butadiene)2Cl,205 or Cr(CO)3(NH3)312 have also been used for the deoxygenation of oxepins to give 312,204 205 and benzoxepins to give 4.12,204 Occasionally, substantial amounts of phenolic compounds have been isolated due to the competing NIH shift of the arene oxide.204 1-Benzoxepin and 3-benzoxepin resist oxygen extrusion under these conditions probably due to their inability to form arene oxi-des.133,204... [Pg.42]

The wide diversity of cocatalysts and transition metal complexes suggests that the oxidation state of the transition metal is not a critical parameter. More important seems the availability of vacant coordination sites. In agreement with this, in the case of heterogeneous systems also,... [Pg.152]

So-called reverse ATRP has been described where a conventional radical initiator (e.g. AIBN) and a transition metal complex in its Higher oxidation state are used. 85"288 One of the first systems explored was ( uBr- 133 AIBN VI VIA. It is important that the initiator is completely consumed early in the polymerization. The use of peroxide initiators in reverse ATRP can be problematical depending on the catalyst used and the reaction temperature.286 289 The system CuBr2/133/BPO/MMA at 60°C was found to provide no control,286 In ATRP at lower temperatures (40 °C), the system CuCl/133/BPO/MMA was successful though dispersities obtained were relatively broadf89 Radicals are produced from the redox reaction between the catalyst in its reduced form and BPO. [Pg.491]

Transition metal catalysts arc characterized by their redox ehemistry (catalysts can be considered as one electron oxidants/reductants). They may also be categorized by their halogen affinity. While in the initial reports on ATRP (and in most subsequent work) copper266,267 or ruthenium complexes267 were used, a wide range of transition metal complexes have been used as catalysts in ATRP. [Pg.492]

The coordination sphere of transition-metal complexes can furthermore be utilized for the fixation of silicon ligands in their lowest oxidation states. Even examples of compounds containing a formally zerovalent silicon (E) are now known [41]. [Pg.4]

Oxidative-addition reactions of transition metal complexes. J. Halpern, Acc. Chem. Res., 1970, 3, 386-392 (66). [Pg.52]


See other pages where Complex transition metal oxides is mentioned: [Pg.114]    [Pg.3976]    [Pg.3975]    [Pg.186]    [Pg.743]    [Pg.463]    [Pg.472]    [Pg.114]    [Pg.3976]    [Pg.3975]    [Pg.186]    [Pg.743]    [Pg.463]    [Pg.472]    [Pg.60]    [Pg.259]    [Pg.248]    [Pg.169]    [Pg.571]    [Pg.592]    [Pg.469]    [Pg.673]    [Pg.697]    [Pg.719]    [Pg.113]    [Pg.456]    [Pg.100]    [Pg.53]    [Pg.85]    [Pg.98]    [Pg.132]    [Pg.140]    [Pg.161]    [Pg.179]    [Pg.236]   
See also in sourсe #XX -- [ Pg.463 , Pg.465 ]




SEARCH



Complex metal oxides

Transition metal oxide

Transition metal oxide oxides

Transition metals oxidation

Transition oxides

© 2024 chempedia.info