Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Tool-Path-Controlled Feed Speed

Comparison between axial forces during tool-path-controlled drilling with and without ultrasonics. [Pg.347]

The relatively small grit size (D46) permits good surface qualities and accuracies of shape. The axial wear amounts to about 5-10 pm per 10 mm depth of cut, considering the positioning accuracy of the machine to be used. Projected to a coating width of 5 mm, this leads to a theoretical minimum total tool path of 5 m depth of cut. [Pg.348]

Drilling with face grinding can be carried out with tool-path-controlled or force-controlled feed speed. The machine used plays a decisive role in... [Pg.346]

The machine used for the turning is a JOBBERXL CNC lathe having the control system FANUC Series Oi Mate-Tc and equipped with maximum spindle speed of 3,500rpm, feed rate 15-20m/rev and KVA rating -16 KVA. For generating the turned surfaces, CNC part programmes for tool paths were created with specific commands. [Pg.200]

See other pages where Tool-Path-Controlled Feed Speed is mentioned: [Pg.347]    [Pg.347]    [Pg.347]    [Pg.347]    [Pg.348]    [Pg.36]    [Pg.515]    [Pg.796]    [Pg.94]   


SEARCH



Feed control

Feeding control

Speed controlled

Speed controller

Speed controlling

© 2024 chempedia.info