2, 6-Toluene diisocyanate, reaction with

Figure Z21 The general reaction of toluene diisocyanate (TDI) with polyols...

ANILINE (62-53-3) Combustible liquid (flash point 158°F/70°C). Unless inhibited (usually by methanol), readily able to polymerize. Violent reaction, including the possibility of fire, explosion, and the formation of heat- or shock-sensitive compounds may result from contact with acetic anhydride, benzene diazonium-2-carboxylate, aldehydes, alkalis, benzenamine hydrochloride, boron trichloride, l-bromo-2,5-pyrrolidinedione, chlorosulfonic acid, dibenzoyl peroxide, fluorine nitrate, halogens, hydrogen peroxide, isocyanates, oleum, oxidizers, organic anhydrides, ozone, perchloryl fluoride, perchromates, potassium peroxide, P-propiolactone, sodium peroxide, strong acids, trichloromelamine. Strong reaction with toluene diisocyanate. Reacts with alkaline earth and alkali metals. Attacks some plastics, rubber, and coatings. Incompatible with copper and copper alloys. 

Sandler, Berg, and Kitazawa [9] reported that 2,4-toluene diisocyanate reacts with diglycidyl ethers to give poly-2-oxazolidones. A similar reaction was also reported for monoisocyanates reacting with monoepoxides [9,10]. The reaction takes place in DMF as a solvent and is catalyzed by tetramethyl-ammonium iodide at 160°C for 6 hr. A recent review of this reaction is worth consulting for additional background material [10a]. 

Burkus and Eckert (14) studied the kinetics of the triethylamine-catalyzed reaction of 2,6-toluene diisocyanate (A) with 1-butanol (B) in toluene solution. The reactions may be represented as... 

An organic group characteristic for polyurethanes, produced from the reaction of diisocyanates, [i.e., toluene diisocyanate, (TDI)], with a phenol, amine or hydroxylic or carboxylic compound. 

For methylene diphenyl diisocyanate (MDI), the initial reaction involves the condensation of aniline [62-53-3] (21) with formaldehyde [50-00-0] to yield a mixture of oligomeric amines (22, where n = 1, 2, 3...). For toluene diisocyanate, amine monomers are prepared by the nitration (qv) of toluene [108-88-3] and subsequent hydrogenation (see Amines byreduction). These materials are converted to the isocyanate, in the majority of the commercial aromatic isocyanate phosgenation processes, using a two-step approach. 

A convenient method for the synthesis of these low boiling materials consists of the reaction of /V,/V-dimethy1iirea [96-31-1] with toluene diisocyanate to yield an aUphatic—aromatic urea (84). Alternatively, an appropriate aUphatic—aromatic urea can be prepared by the reaction of diphenylcarbamoyl chloride [83-01-2] with methylamine. Thermolysis of either of the mixed ureas produces methyl isocyanate ia high yield (3,85). 

Phosgenation. The most important reaction of y -toluenediamine is with phosgene [75-44-5] to give toluene diisocyanate TDI (see... 

Toluene Diisocyanate. Toluene diisocyanate is the basic raw material for production of flexible polyurethane foams. It is produced by the reaction sequence shown below, in which toluene is dinitrated, the dinitrotoluene is hydrogenated to yield 2,4-diaminotoluene, and this diamine in turn is treated with phosgene to yield toluene 2,4-diisocyanate. 

PUR are a broad class of highly cross-linked plastics prepared by multiple additions of poly-functional hydroxyl or amino compounds. Typical reactants are polyisocyanates [toluene diisocyanate (TDI)] and polyhydroxyl molecules such as polyols, glycols, polyesters, and polyethers. The cyanate group can also combine with water this reaction is the basis for hardening of the one-part foam formulations. 

Another class of hydrocarbon binders used in propints are the carboxy-terminated polybutadiene polymers which are cross-linked with either tris[l-(2-methyl)aziridinyl] phosphine oxide (MAPO) or combinations with phenyl bis [l -(2-methyl)aziridinyl] phosphine oxide (Phenyl MAPO). Phenyl MAPO is a difunctional counterpart of MAPO which makes possible chain extension of polymers with two carboxylic acid groups. A typical propint formulation with ballistic properties is in Table 11 (Ref 83) Another class of composites includes those using hydroxy-terminated polybutadienes cross-linked with toluene diisocyanate as binders. The following simplified equations illustrate typical reactions involved in binder formation... 

Chemoenzymatic synthesis of alkyds (oil-based polyester resins) was demonstrated. PPL-catalyzed transesterification of triglycerides with an excess of 1,4-cyclohexanedimethanol mainly produced 2-monoglycerides, followed by thermal polymerization with phthalic anhydride to give the alkyd resins with molecular weight of several thousands. The reaction of the enzymatically obtained alcoholysis product with toluene diisocyanate produced the alkyd-urethane. 

Via such a gas/liquid reaction, toluene-2,4-diisocyanate reacts with chlorine to give l-chloromethyl-2,4-diisocyanatobenzene [6], As a ring-substituted side product, toluene-5-chloro-2,4-diisocyanate is formed in minor quantities. 

Tuz Golu (lake), 5 784 Tversky similarity, 6 8 T vessicant agent, 5 816 physical properties, 5 817t Twaron fiber, 13 373 Tween surfactants, 24 150 12-membered ring macrolides, 15 272, 275t 2,6-TDI, reaction with a polyether triol, 25 459. See also Toluene diisocyanate (TDI)... 

The laser flash photolysis of aromatic diisocyanate based polyurethanes in solution provides evidence for a dual mechanism for photodegradation. One of the processes, an N-C bond cleavage, is common to both TDI (toluene diisocyanate) and MDI (methylene 4,4 -diphenyldiisocyanate) based polyurethanes. The second process, exclusive to MDI based polyurethanes, involves formation of a substituted diphenylmethyl radical. The diphenylmethyl radical, which readily reacts with oxygen, is generated either by direct excitation (248 nm) or indirectly by reaction with a tert-butoxy radical produced upon excitation of tert-butyl peroxide at 351 nm. 

Isocyanates are capable of co-reacting to form dimers, oligomers and polymers. For example, aromatic isocyanates will readily dimerize when heated, although the presence of a substituent ortho to the -NCO group reduces this tendency. For example, toluene diisocyanate (TDI) is less susceptible to dimer formation than diphenylmethane diisocyanate (MDI). The dimerization reaction is reversible, with dissociation being complete above 200 °C. It is unusual for aliphatic isocyanates to form dimers, but they will readily form trimers, as do aromatic isocyanates. The polymerization of aromatic isocyanates is known, but requires the use of metallic sodium in DMF. 

Two other derivatives of toluene are the important explosive trinitrotoluene (TNT) and the polyurethane monomer toluene diisocyanate (TDI). TNT requires complete nitration of toluene. TDI is derived from a mixture of dinitrotoluenes (usually 80% o,p and 20% o,o) by reduction to the diamine and reaction with phosgene to the diisocyanate. TDI is made into flexible foam polyurethanes for cushioning in furniture (35%), transportation (25%), carpet underlay (20%), and bedding (10%). A small amount is used in polyurethane coatings, rigid foams, and elastomers. 

---