Titanocene dichloride, reaction

Therefore, we derided to initiate a program directed towards the development of a tita-nocene-catalyzed epoxide opening [3c]. Since titanocene dichloride is formed in the stoichiometric reaction after the protic quench, the challenge to be met is the regeneration of the redox-active species in situ, the fundamental requirement for a catalytic reaction. This underlying problem is depicted in Scheme 12.12. 

In 1978, Tebbe and co-workers reported the formation of the metallacyde 4, commonly referred to as the Tebbe reagent, by the reaction of two equivalents of trimethylaluminum with titanocene dichloride. The expulsion of dimethylaluminum chloride by the action of a Lewis base affords the titanocene-methylidene 5 (Scheme 14.4) [8]. 

Aluminum-free titanocene-methylidene can be generated by thermolysis of titana-cyclobutanes 6, which are prepared by reaction of the Tebbe reagent with appropriate olefins in the presence of pyridine bases [9]. Alternatively, the titanacyclobutanes are accessible from titanocene dichloride and bis-Grignard reagents [10] or from 71-allyl titanocene precursors [11]. The a-elimination of methane from dimethyltitanocene 7 provides a convenient means of preparing titanocene-methylidene under almost neutral conditions [12] (Scheme 14.5). 

To a solution of the titanocene(II) reagent 29 in THF (42 mL) in a 300-mL round-bottomed flask, prepared from titanocene dichloride (6.54 g, 26.3 mmol), magnesium turnings (0.766 g, 31.5 mmol), triethyl phosphite (8.96 mL, 52.5 mmol), and finely powdered 4 A molecular sieves (1.31 g) according to the procedure described above, was added a solution of l,l-bis(phenylthio)cyclobutane (63 2.29 g, 8.40 mmol) in THF (14 mL). The reaction mixture was stirred for 15 min. and then a solution of (S)-isopropyl 3-phenylpro-panethioate (91 1.46 g, 7.00 mmol) in THF (21 mL) was injected dropwise over a period of 10 min. The reaction mixture was refluxed for 1 h, then cooled, whereupon 1 m aq. NaOH solution (150 mL) was added. The insoluble materials produced were removed by filtration through Celite and washed with diethyl ether. The aqueous layer was separated and extracted with diethyl ether. The combined ethereal extracts were dried (Na2S04), filtered, and concentrated. The residual liquid was purified by column chromatography (silica gel, hexane) to afford 1.33 g (77%) of (l-isopropylthio-3-phenylpropan-1 -ylidene) cyclobutane (92). 

The Diels-Alder reaction outlined above is a typical example of the utilization of axially chiral allenes, accessible through 1,6-addition or other methods, to generate selectively new stereogenic centers. This transfer of chirality is also possible via in-termolecular Diels-Alder reactions of vinylallenes [57], aldol reactions of allenyl eno-lates [19f] and Ireland-Claisen rearrangements of silyl allenylketene acetals [58]. Furthermore, it has been utilized recently in the diastereoselective oxidation of titanium allenyl enolates (formed by deprotonation of /3-allenecarboxylates of type 65 and transmetalation with titanocene dichloride) with dimethyl dioxirane (DMDO) [25, 59] and in subsequent acid- or gold-catalyzed cycloisomerization reactions of a-hydroxyallenes into 2,5-dihydrofurans (cf. Chapter 15) [25, 59, 60],... 

An alternative, but related, route to allenic titanium reagents from propargylic esters has been reported recently. Reaction of titanocene dichloride with BuMgCl and Mg yields a reactive titanocene intermediate, formulated as Cp2Ti. This reduced Ti species reacts in situ by oxidative addition to propargylic acetates. The allenyltitanium reagents thus produced add to aldehydes and ketones, as expected, to afford homopropargylic alcohols (Table 9.27) [43]. 

Since the titanocene dichloride is insoluble and the intermediate Cp2Ti(Me)CI is soluble, the second methyl group adds much faster than the first. Reaction progress can be monitored by visually observing the disappearance of the purple crystalline titanocene dichloride. 

Titanocene dichloride also catalyzes a regioselective carbomagnesiation of alkenes 187 (equation 115) and dienes 188 (equation 116). The reaction proceeds at 0°C in THF in the presence of Cp2TiCl2, an organic halide and n-BuMgCl which leads to the catalytic species, affording benzyl, allyl or a-silyl alkylmagnesium halides, which are trapped with electrophiles (equation 117) . ... 

Reduction of carboxylic acids 9-42 Reduction of carboxylic esters 9-43 Reduction of carboxylic esters with titanocene dichloride 9-44 Reduction of anhydrides 9-45 Reduction of acyl halides 9-53 Reduction of nitriles 9-57 Reduction of hydroperoxides 9-60 Reduction of peroxides 9-69 Reaction between aldehydes and base (Cannizzaro)... 

Hydroalumination. Titanocene dichloride is an effective catalyst for hydro-uluminution of alkenes and alkynes with his(dialkylamino)alancs5 and various complex aluminum hydrides. The adducts can be quenched with water or iodine. The reaction is satisfactory for terminal alkenes and internal alkynes, but is not clcun for internal alkenes and terminal alkynes. 

Table 1. Percentage yields as a function of PEG. (Reaction conditions One millimole of titanocene dichloride in 50 ml of chloroform added to a stirred solution of one millimole of diol in 50 ml of water.)...

Table 4. Ion fragments derived from the reaction of hexaethylene glycol and titanocene dichloride.

COOH-> —CHO Reaction of a carboxylic acid with isobutylmagnesium bromide and catalytic amounts of titanocene dichloride affords aldehydes in fair to moderate yield (equation I). The reaction fails with a,/ -unsaturated acids. 

It should be noted that titanocene-catalyzed carbosilylation of alkenes and dienes, which uses alkyl halides and chlorosilanes, involves alkyl radical addition to styrenes and dienes [68]. The reaction uses butylmagnesiumchloride and a catalytic amount of titanocene dichloride, which would form the complex... 

The nucleophilic 7i-allyltitanium complex 67 is prepared by the reaction of the conjugated diene 65 with titanocene hydride 66, generated in situ by the treatment of titanocene dichloride with 2 moles of z-PrMgCl [21]. The complex is nucleophilic and reacts with aldehydes regio- and stereoselectively to give homoallylic alcohols [22]. 

Dimethyltitanocene (213), called the Petasis reagent, can be used for alkenation of carbonyls (aldehydes, ketones, esters, thioesters and lactones). This reagent is prepared more easily than the Tebbe reagent by the reaction of titanocene dichloride with MeLi. However, this reagent may not be a carbene complex and its reaction may be explained as a nucleophilic attack of the methyl group at the carbonyl [67], Alkenylsilanes are prepared from carbonyl compounds. Tri(trimethylsilyl)titanacyclobutene (216), as a... 

The Tebbe Reagent is a metal carbenoid prepared from the dimetallomethylene species derived by the reaction of trimethyl aluminium with titanocene dichloride this reagent exhibits carbenoid behaviour after the addition of a catalytic amount of pyridine. The Tebbe Reagent reacts with various carbonyl partners to give the product of methylenation ... 

Dimethyltitanocene, Cp2Ti(CH3)2, (1) m.p. 97°. This reagent is prepared by reaction of titanocene dichloride, Cp2TiCl2, with CH3Li (95% yield). It is stable for several months when stored in the dark in toluene or THF, but decomposes rapidly in the solid state.1... 

---