Titanium Compounds chloride

Paints. Paints account for perhaps 3% of sulfur consumption (see Paint). The main sulfur use is for the production of titanium dioxide pigment by the sulfate process. Sulfuric acid reacts with ilmenite or titanium slag and the sulfur remains as a ferrous sulfate waste product. Difficulties with this process have led to the development of the chloride process (see Pigments, inorganic Titanium compounds). 

Precipitation of a hydrated titanium oxide by mixing aqueous solutions of titanium chloride with alkaU forms the precipitation seeds, which are used to initiate precipitation in the Mecklenburg (50) variant of the sulfate process for the production of pigmentary titanium dioxide. Hydrolysis of aqueous solutions of titanium chloride is also used for the preparation of high purity (>99.999%) titanium dioxide for electroceramic appHcations (see Ceramics). In addition, hydrated titanium dioxide is used as a pure starting material for the manufacture of other titanium compounds. 

Manufacture. Titanium chloride is manufactured by the chlorination of titanium compounds (1,134—138). The feedstocks usually used are mineral or synthetic mtile, beneficiated ilmenite, and leucoxenes. Because these are all oxygen-containing, it is necessary to add carbon as well as coke from either coal or fuel oil during chlorination to act as a reducing agent. The reaction is normally carried out as a continuous process in a fluid-bed reactor (139). The bed consists of a mixture of the feedstock and coke. These are fluidized by a stream of chlorine iatroduced at the base (see Fluidization). The amount of heat generated in the chlorination process depends on the relative proportions of CO2 or CO that are formed (eqs. 1 and 2), and the mechanism that... 

Reduction. Triaryknethane dyes are reduced readily to leuco bases with a variety of reagents, including sodium hydrosulfite, 2inc and acid (hydrochloric, acetic), 2inc dust and ammonia, and titanous chloride in concentrated hydrochloric acid. Reduction with titanium trichloride (Knecht method) is used for rapidly assaying triaryknethane dyes. The TiCl titration is carried out to a colorless end point which is usually very sharp (see Titanium COMPOUNDS, inorganic). 

Owing to their particular interest two individual reactions will now be discussed separately. The reaction of methoxycarbonylhydrazine and 3-bromo-2,4-pentanedione affords, in addition to the expected pyrazole (608), a pyrazolium salt (609), the structure of which was established by X-ray crystallography (74TL1987). Aryldiazonium salts have been used instead of arylhydrazines in the synthesis of pyrazolines (610) and pyrazoles (611) (82JOC81). These compounds are formed by free radical decomposition of diazonium salts by titanium(n) chloride in the presence of a,/3-ethylenic ketones. 

Note Sulfuric acid (4%) can also be employed in place of hydrochloric acid [3]. If ammoniacal mobile phases are employed the ammonia should be removed completely (e.g. heat to 105 °C for 10 min) before dipping or spraying otherwise background discoloration can occur. The addition of titanium(III) chloride to the reagent allows also the staining of aromatic nitro compounds [6]. 

Allyltrialkoxy- or -tris(dialkylamino)titanium reagents are not capable of chelation-controlled addition reactions with oxy- or amino-substituted carbonyl compounds due to their low Lewis acidity87. To attain chelation control, the application of allylsilanes (Section 1.3.3.3.5.2.2.) and allylstannanes (Section I.3.3.3.6.I.3.2.) in the presence of bidentate Lewis acids like titanium(IV) chloride, tin(lV) chloride or magnesium bromide are the better options. 

Tricyclic compounds can be obtained directly by annulation on to cyclic allylsilanes, using either ethylaluminum dichloride or titanium(IV) chloride as Lewis acids57. The stereochemical outcome of this particular cyclization is controlled by the relative configuration of the cyclic allylsilane. The reaction follows the usual anti" SE2 process for reactions of allylsilanes with electrophiles. Thus, the reaction was stereospecific, which makes it very useful for stereocon-trolled syntheses of complex ring systems57. 

The specific detection of aromatic nitro compounds is a second example. These can be converted by reduction to primary amines, which are then diazotized and coupled to yield azo dyes (cf. reagent sequence Titanium(III) chloride — Bratton-Marshall reagent ). Sodium nitrite —naphthol reagent, diazotized sulfanilic acid and other reagents specific for amino groups (e.g. ninhydrin, fluorescamine, DOOB, NBD chloride [9]) can also be used in the second stage of the reaction (Fig. 21). 

The aromatic skeleton is nitrated in the first reaction step. Then titanium(Ill) chloride in acid medium is used to reduce the aromatic nitro compounds so produced to the corresponding amines, which in turn are diazotized and coupled to N-(l-naphthyl)-ethylenediamine to yield an azo dye (cf. Fig. 21). 

Titanium(III) chloride (particularly in slightly alkaline medium) reduces the p-nitro groups of the thiophosphate insecticides to amino groups, which are then reacted with nitrite in acid mediiun in a second step to yield a diazonium compound as intermediate. This is then coupled to N-(l-naphthyl)-ethylenediamine dihydrochloride to yield an azo dye [3]. In the case of benzodiazepines the first reaction step includes an additional acid hydrolysis to the corresponding benzophenone derivative [2]. 

Redox titrants (mainly in acetic acid) are bromine, iodine monochloride, chlorine dioxide, iodine (for Karl Fischer reagent based on a methanolic solution of iodine and S02 with pyridine, and the alternatives, methyl-Cellosolve instead of methanol, or sodium acetate instead of pyridine (see pp. 204-205), and other oxidants, mostly compounds of metals of high valency such as potassium permanganate, chromic acid, lead(IV) or mercury(II) acetate or cerium(IV) salts reductants include sodium dithionate, pyrocatechol and oxalic acid, and compounds of metals at low valency such as iron(II) perchlorate, tin(II) chloride, vanadyl acetate, arsenic(IV) or titanium(III) chloride and chromium(II) chloride. 

Kahn and Chen (87TL1623) performed the regio- and stereospecific reaction of 1,3-cyclooctadiene and acyliminium derivative 79, which resulted exclusively in compounds 80 in 37% yield after chromatographic purification. 79 was prepared by treatment of the A-methylimine of benzal-dehyde with methyl chloroformate in the presence of titanium(IV) chloride. 

Pentafluorocthyl iodide is of practical interest, particularly as a precursor of higher perfluoroal-kyl iodides. There are several patents for the preparation of the key compound from tetra-fluoroethene, iodine pentafluoride and iodine at 75-80 C in the presence of catalysts anti-mony(III) fluoride, titanium(lV) chloride, boron trifluoride, vanadium(V) fluoride, niobium(V) fluoride, and molybdenum(Vl) fluoride.11-13 The agents iodine monofluoride" and bromine monofluoride" can add to branched pcrfluoroalkcnes, e.g. perfluoro-2-methylbut-2-ene gives perfluoro-2-iodo-2-methylbutane.1415... 

---