Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Titanium complexes with olefins

Hydrolysis, redox, metathetical, and halide abstraction reactions are covered here. Some of these reactions lead to specific complexes with Ti-O, Ti-N, and Ti-C bonds which are described in subsequent sections. Comments on the applications of the mono-Cp trihalo titanium complexes as olefin polymerization pre-catalysts have been mentioned in Section 4.05.3.1.1 and some recent advances in this field are also considered here. (See Chapter 4.09 of this work.)... [Pg.398]

M. Fujiwara, H. Wessel, H. Park, H. W. Roesky, Formation of titanium tert-butylperoxo intermediate from cubic silicon-titanium complex with tert-butyl hydroperoxide and its reactivity for olefin epoxidation. Tetrahedron 58 (2002) 239. [Pg.92]

R. Furuyama, M. Mitani, J.-L Mobii, R. Mori, H. Tanaka, T. Fujita, Ethylene/higher a olefin copolymerization behavior of fluminated bis(phenoxy- imine) titanium complexes with methylalumoxane synthesis of new polyethylene-based block copolymers. Macromolecules 38(5), 1546-1552 (2005)... [Pg.76]

Activation of Iridentate amine-diol titanium complexes with MAO also produced poly(l-hexene) with narrow molecular weight distributions [63]. Modification of C,-symmetric hafnium catalysts (Scheme 2.14) [64] resulted in pyridylamido ligands (Scheme 2.15) for the polymerization of isotactic poly(a-olefins) with relatively narrow molecular weight distributions (M 1.20) for molecular masses up to 152,000g mole" [42]. [Pg.34]

Some of the vinyl monomers polymerized by transition metal benzyl compounds are listed in Table IX. In this table R represents the rate of polymerization in moles per liter per second M sec-1), [M]0 the initial monomer concentration in moles per liter (M) and [C]0 the initial concentration of catalyst in the same units. The ratio i2/[M]0[C]0 gives a measure of the reactivity of the system which is approximately independent of the concentration of catalyst and monomer. It will be observed that the substitution in the benzyl group is able to affect the polymerization rate significantly, but the groups that increase the polymerization rate toward ethylene have the opposite effect where styrene is concerned. It would also appear that titanium complexes are more active than zirconium. The results with styrene and p-bromostyrene suggests that substituents in the monomer, which increase the electronegative character of the double bond, reduces the polymerization rate. The order of reactivity of various olefinically unsaturated compounds is approximately as follows ... [Pg.282]

Certain half-sandwich phenoxides have been shown to be highly active olefin polymerization catalysts. For example, the zirconium complex (60) polymerizes ethylene with an activity of 1,220 gmmol-1 h-1 bar-1.181 A similar titanium complex (61) displays an activity of 560gmmol ll bar 1 at 60°C.182-189 Comparable activities were also recorded for the copolymerization of ethylene with 1-butene and 1-hexene. [Pg.10]

Although the molybdenum and ruthenium complexes 1-3 have gained widespread popularity as initiators of RCM, the cydopentadienyl titanium derivative 93 (Tebbe reagent) [28,29] can also be used to promote olefin metathesis processes (Scheme 13) [28]. In a stoichiometric sense, 93 can be also used to promote the conversion of carbonyls into olefins [28b, 29]. Both transformations are thought to proceed via the reactive titanocene methylidene 94, which is released from the Tebbe reagent 93 on treatment with base. Subsequent reaction of 94 with olefins produces metallacyclobutanes 95 and 97. Isolation of these adducts, and extensive kinetic and labeling studies, have aided in the eluddation of the mechanism of metathesis processes [28]. [Pg.102]

Although the reaction of a titanium carbene complex with an olefin generally affords the olefin metathesis product, in certain cases the intermediate titanacyclobutane may decompose through reductive elimination to give a cyclopropane. A small amount of the cyclopropane derivative is produced by the reaction of titanocene-methylidene with isobutene or ethene in the presence of triethylamine or THF [8], In order to accelerate the reductive elimination from titanacyclobutane to form the cyclopropane, oxidation with iodine is required (Scheme 14.21) [36], The stereochemistry obtained indicates that this reaction proceeds through the formation of y-iodoalkyltitanium species 46 and 47. A subsequent intramolecular SN2 reaction produces the cyclopropane. [Pg.485]

The potential synthetic utility of titanium-based olefin metathesis and related reactions is evident from the extensive documentation outlined above. Titanium carbene complexes react with organic molecules possessing a carbon—carbon or carbon—oxygen double bond to produce, as metathesis products, a variety of acyclic and cyclic unsaturated compounds. Furthermore, the four-membered titanacydes formed by the reactions of the carbene complexes with alkynes or nitriles serve as useful reagents for the preparation of functionalized compounds. Since various types of titanium carbene complexes and their equivalents are now readily available, these reactions constitute convenient tools available to synthetic chemists. [Pg.497]

The formation of complexes between olefins and metal halides is particularly well documented for titanium tetrachloride [10, 11, 12] thus my theory can be applied with some confidence to systems which involve this metal halide. I will show that it provides a simple qualitative explanation for observations which have so far remained obscure and affords also a quantitative interpretation which is open to testing once the necessary... [Pg.289]

A novel route to 2,3-dihydrothiophenes involved a titanocene-promoted carbene formation and subsequenct intramolecular cyclization onto a thiol ester <99SL1029>. Treatment of thioacetal 9 with the low-valent titanium complex 10 gave 2,3-dihydrothiophene 12 by intramolecular olefination of the thiol ester of titanium-carbene intermediate 11. Another metal-mediated cyclization onto the thiophene ring system involved the palladium-catalyzed cyclization of 1,6-diynes <99T485>. For example, treatment of thioether 1,6-diyne 13 with Pdlj in the presence of CO and Oj in methanol followed by treatment with base gave 14. [Pg.93]

Subsequently, direct incorporation of GO by titanocene(ii) catalyst, Gp2Ti(GO)2, under a GO atmosphere was reported.This catalytic system showed substantially higher TON and broader functional group compatibility. However, this catalyst fails to react with sterically hindered olefins and alkynes. In a recent contribution from the same group, a series of aryloxide titanium complexes 22 (figure 4) are prepared and shown to promote PKR with some sterically hindered enynes." ... [Pg.343]

The class of monocyclopentadienylamido (CpA) titanium complexes has attracted the interest for the polymerization of a-olefins with bulky side groups. This arises since conventional Ziegler-Natta catalysts are less effective in starting the copolymerization of ethene with 4-methyl-l-pentene. Homogeneous catalysts of the zirconium cyclopentadienyl type (Cp2M) with methylaluminoxane exhibit a low catalytic activity. [Pg.112]

In fact it can be assumed that, in the catalytic system TiCl4-bis[(S)-2-methyl-butyl]-zinc, dialkyl zinc alkylates the titanium atom (19) and that the titanium alkyl thus formed gives more stable complexes with the (S) olefin than with the (R) olefin, thus favouring the adsorption and polymerization of the (S) antipode (104). The influence exerted by the asymmetric groups bound to transition metals on the type of complexes formed by olefins with the same metal atom, has been recently investigated by Pajaro, Corradini, Palumbo and Panunzi (90). [Pg.442]

The detail of the structure of the polymerisation centre present in suppported Ziegler-Natta catalysts for a-olefin polymerisation has been the subject of much research effort (e.g./-/2) The catalyst consists of a solid catalyst MgC /TiC /electron donor and a co-catalyst, an aluminium alkyl complexed with an electron donor. Proposed mechanisms for the polymerisation involve a titanium species attached to magnesium chloride with the olefin coordinated to titanium. The detail of the site at which the titanium species is attached is an important area of study in understanding the mechanism of catalysis and several recent papers 10-12) have investigated the surface structure of magnesium chloride and the attachment of TiCl4, in particular the interaction of titanium species with the 100 and 110 planes of a and (3- magnesium chloride. [Pg.251]

Bis(pyrrolide-imine) complexes, with titanium, for olefin copolymers, 4, 1145... [Pg.66]


See other pages where Titanium complexes with olefins is mentioned: [Pg.384]    [Pg.509]    [Pg.538]    [Pg.547]    [Pg.38]    [Pg.516]    [Pg.357]    [Pg.310]    [Pg.491]    [Pg.181]    [Pg.156]    [Pg.333]    [Pg.342]    [Pg.11]    [Pg.517]    [Pg.82]    [Pg.111]    [Pg.365]    [Pg.475]    [Pg.98]    [Pg.194]    [Pg.563]    [Pg.272]    [Pg.7]    [Pg.8]    [Pg.232]    [Pg.560]    [Pg.764]    [Pg.557]    [Pg.159]    [Pg.111]    [Pg.29]   
See also in sourсe #XX -- [ Pg.218 , Pg.219 ]

See also in sourсe #XX -- [ Pg.218 , Pg.219 ]




SEARCH



Complexes with olefins

Olefin complexation

Olefin complexes

Olefines, complexes

Titanium complexe

Titanium complexes

Titanium with olefins

With Olefins

© 2024 chempedia.info