Thin films protective coatings

Use and Uimitations of Electrochemical Techniques A major caution must be noted as to the general, indiscriminate use of all electrochemical tests, especially the use of AC and EIS test techniques, for the study of corrosion systems. AC and EIS techniques are apphcable for the evaluation of very thin films or deposits that are uniform, constant, and stable—for example, thin-film protective coatings. Sometimes, researchers do not recognize the dynamic nature of some passive films, corrosion produc ts, or deposits from other sources nor do they even consider the possibility of a change in the surface conditions during the course of their experiment. As an example, it is note-... 

Abstract. The thin-film protective coat of titanium nitride (TiN) plotted to stainless steel (brand 12X18H10T) is explored. The mathematical model and methods of parametric identification are described. Kinetic parameters of hydrogen permeability through stainless steel membrane with TiN protective coat are determined. 

Thermolysis is used in the coating of glass and other surfaces with a film of titanium dioxide. When a lower alkoxide, eg, TYZOR TPT, vaporizes in a stream of dry air and is blown onto hot glass botdes above ca 500°C, a thin, transparent protective coating of Ti02 is deposited. 

Thin Films and Coatings discusses applications for optical, electronic, protective, and porous thin films or coatings. 

Imaging plates are exposed similar to radiographic films. They are read out by a LASER-scanner to a digital image without any developing process. After optical erasing of the virtual picture the same IP can be used cyclic up to more than 1000 times. The life time is limited by the mechanical stability of the IP s. An IP consists of a flexible polymer carrier which is coated with the sensitive layer. This layer is covered with a thin transparent protective foil. 

Space-based solar ceUs are covered with a very thin layer of vitreous siHca to protect against the damaging environment of space such as atomic oxygen, micrometeorites, and radiation effects. Because the siHca is transparent to damaging uv radiation, it is normally coated with a uv-reflective thin film... 

Metals that depend on a relatively thick protective coating of corrosion product for corrosion resistance are frequently subject to erosion-corrosion. This is due to the poor adherence of these coatings relative to the thin films formed by the classical passive metals, such as stainless steel and titanium. Both stainless steel and titanium are relatively immune to erosion-corrosion in most cooling water environments. 

Thin polymeric films have important industrial apphcations (e.g., as protective coatings, lubricants, adhesives, dielectric or nonlinear optic devices, etc.) and pose many fundamental problems of film stability [1,2,4]. An important question, therefore, is whether these films break up and spontaneously dewett the substrate, resulting in the formation of droplets. The... 

Impedance spectroscopy This technique is essentially the extension of polarization resistance measurements into low-conductivity environments, including those listed above. The technique can also be used to monitor atmospheric corrosion, corrosion under thin films of condensed liquid and the breakdown of protective paint coatings. Additionally, the method provides mechanistic data concerning the corrosion processes, which are taking place. 

---