Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Thermoplastic Pipes

Further information on the design of thermoplastic piping can be found in the Plastics Pipe Institute s Technical Report TR-21. [Pg.1004]

Joining NonmetaUic Pipe Thermoplastic piping may be joined by a qiiahfied hot-gas welding procedure, a qnalined solvent-cement procedure, or by a qualified heat-fusion procedure. The general welding and heat-fiision procedures are described in ASTM D-2657 and solvent-cement procedures in ASTM D-2855. Two other techniques, for flared joints and elastomeric-sealed joints, are described in ASTM D-3140 and D-3139, respectively. [Pg.1005]

The physical and mechanical properties of the principal thermoplastics of interest for process plant applications are listed in Table 3.42. Table 3.43 gives typical hydrostatic design stresses for different types of thermoplastic pipe. Plastics widely employed in piping systems are described briefly below. [Pg.105]

Table 3.43. Hydrostatic Design Pressures for Thermoplastic Pipe for Temperatures up to I30°C [55]... Table 3.43. Hydrostatic Design Pressures for Thermoplastic Pipe for Temperatures up to I30°C [55]...
BS 7291, Parts 1-4, Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings, 1990-2001. [Pg.79]

ISO 1167, Thermoplastics pipes for the conveyance of fluids - Resistance to internal pressure - Test method, 1996. [Pg.174]

ISO/DIS 9080, Thermoplastics pipes for the transport of fluids - Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials, 1992. [Pg.174]

ISO 6721-8 1997 Plastics - Determination of dynamic mechanical properties - Part 8 Longitudinal and shear vibration - Wave-propagation method ISO 6721-10 1999 Plastics - Determination of dynamic mechanical properties - Part 10 Complex shear viscosity using a parallel-plate oscillatory rheometer ISO 9311-2 2002 Adhesives for thermoplastic piping systems - Part 2 Determination of shear strength... [Pg.173]

ISO 6259-2 1997 Thermoplastics pipes - Determination of tensile properties - Part 2 Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)... [Pg.324]

ISO 8361-2 1991 Thermoplastics pipes and fittings - Water absorption - Part 2 Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings ISO 9393-2 1997 Thermoplastics valves - Pressure test methods and requirements - Part 2 Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves ISO 9852 1995 Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method ISO 9853 1991 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems - Crushing test... [Pg.324]

ISO 4433-3 1997 Thermoplastics pipes - Resistance to liquid chemicals - Classification -Part 3 Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes ISO 6259-2 1997 Thermoplastics pipes - Determination of tensile properties - Part 2 Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)... [Pg.331]

ISO 727-1 2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1 Metric series ISO 727-2 2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2 Inch-based series ISO 2507-3 1995 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3 Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings... [Pg.362]

ISO 8361-3 1991 Thermoplastics pipes and fittings - Water absorption - Part 3 Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings... [Pg.362]

TABLE 10-19 Recommended Temperature Limits for Thermoplastic Pipe ... [Pg.76]

Handbook of Thermoplastic Piping System Design, Thomas Sixsmith and Reinhard Hanselka... [Pg.6]

Thermoplastic Piping Systems Plumbing Systems Municipal Piping Industrial Piping Systems Ventilation Duct Systems Fire Protection Systems... [Pg.331]

Which of the following materials is most suitable for the manufacture of thermoplastic pipe Briefly tell why. [Pg.37]

Govaert, R. Lueghamer, A. Thermoplastic piping systems for pharmaceutical water applications. Ultrapure Water 2001, 18 (10), 32-39. [Pg.4048]

Table 2.16 Hydrostatic design pressures for thermoplastic pipe at different temperatures... Table 2.16 Hydrostatic design pressures for thermoplastic pipe at different temperatures...
See other pages where Thermoplastic Pipes is mentioned: [Pg.948]    [Pg.948]    [Pg.948]    [Pg.979]    [Pg.199]    [Pg.82]    [Pg.323]    [Pg.323]    [Pg.194]    [Pg.76]    [Pg.126]    [Pg.203]    [Pg.331]    [Pg.101]    [Pg.771]    [Pg.771]    [Pg.771]    [Pg.802]    [Pg.1109]    [Pg.1159]    [Pg.1112]   
See also in sourсe #XX -- [ Pg.698 ]



SEARCH



European consumption of major thermoplastics for tubes, pipes, conduits and fittings

Pipes/piping thermoplastic pipe

Pipes/piping thermoplastic pipe

Polyvinyl Chloride Pipe and Fittings—Thermoplastic Processes

Reinforced Thermoplastic Pipes (RTP)

Reinforced thermoplastic piping

Thermoplastic pipes tubes

Thermoplastic plastic piping

Thermoplastic plastic piping applications

Various Thermoplastic and Elastomeric Piping Materials—Nibco

© 2024 chempedia.info