Tensile strength, plastics

Carbon nanotube Molecular dynamics Tensile strength Plasticity Adatoms Defects Electron transport... 

Tensile strength, plasticity, dielectric stren h, magnetisation curve of ferromagnetic substances... 

Commercially produced elastic materials have a number of additives. Fillers, such as carbon black, increase tensile strength and elasticity by forming weak cross links between chains. This also makes a material stilfer and increases toughness. Plasticizers may be added to soften the material. Determining the effect of additives is generally done experimentally, although mesoscale methods have the potential to simulate this. 

Table 13 is a representative Hst of nickel and cobalt-base eutectics for which mechanical properties data are available. In most eutectics the matrix phase is ductile and the reinforcement is britde or semibritde, but this is not invariably so. The strongest of the aHoys Hsted in Table 13 exhibit ultimate tensile strengths of 1300—1550 MPa. Appreciable ductiHty can be attained in many fibrous eutectics even when the fibers themselves are quite britde. However, some lamellar eutectics, notably y/y —5, reveal Htde plastic deformation prior to fracture. 

Plastic film Melting point, °C Moisture absorption, % Tensile strength, MPa " Ultimate elongation, % Coefficient of thermal expansion, 10-%K Dissipation factor at 1 kH2 Dielectric constant at 1 kHz Dielectric strength, MV/m Cost factor... 

Fig. 4. Tensile strength of various PVC—plasticizer combinations when fused at 160°C where M represents Cg I...

Nonoxide fibers, such as carbides, nitrides, and carbons, are produced by high temperature chemical processes that often result in fiber lengths shorter than those of oxide fibers. Mechanical properties such as high elastic modulus and tensile strength of these materials make them excellent as reinforcements for plastics, glass, metals, and ceramics. Because these products oxidize at high temperatures, they are primarily suited for use in vacuum or inert atmospheres, but may also be used for relatively short exposures in oxidizing atmospheres above 1000°C. 

The Rheo-Tex rheometer is an inexpensive, automated instmment using load cell technology to measure indentation and creep. Available software calculates hardness/softness, brittleness, plasticity, and tensile strength. This instmment is particularly valuable for measurements on foods and personal care products. 

A variation of the preceding process is used to produce oriented vinyUdene chloride copolymer films. The plastic is extmded into tube form and then is supercooled and subsequently biaxiaHy oriented in a continuous bubble process. The supercooled tube is flattened and passed through two sets of pinch roUs, which are arranged so that the second set of roUs travels faster than the first set. Between the two sets, air is injected into the tube to create a bubble that is entrapped by the pinch roUs. The entrapped air bubble remains stationary while the extmded tube is oriented as it passes around the bubble. Orientation is produced in the transverse and the longitudinal directions, creating excellent tensile strength, elongation, and flexibiUty in the film. The commercial procedure has been described (157). 

Fig. 3. Effects of composition on physical properties. A, acetyl B, butyryl C, cellulose. 1, increased tensile strength, stiffness 2, decreased moisture sorption 3, increased melting point 4, increased plasticizer compatibiUty 5, increased solubiUties in polar solvents 6, increased solubiUties in nonpolar...

Random copolymers of vinyl chloride and other monomers are important commercially. Most of these materials are produced by suspension or emulsion polymerization using free-radical initiators. Important producers for vinyl chloride—vinyUdene chloride copolymers include Borden, Inc. and Dow. These copolymers are used in specialized coatings appHcations because of their enhanced solubiUty and as extender resins in plastisols where rapid fusion is required (72). Another important class of materials are the vinyl chloride—vinyl acetate copolymers. Principal producers include Borden Chemicals Plastics, B. F. Goodrich Chemical, and Union Carbide. The copolymerization of vinyl chloride with vinyl acetate yields a material with improved processabihty compared with vinyl chloride homopolymer. However, the physical and chemical properties of the copolymers are different from those of the homopolymer PVC. Generally, as the vinyl acetate content increases, the resin solubiUty in ketone and ester solvents and its susceptibiUty to chemical attack increase, the resin viscosity and heat distortion temperature decrease, and the tensile strength and flexibiUty increase slightly. 

---