Tempo-mediated free radical polymerization

Chen YM, Wulff G (2001) Synthesis of poly(styryl sugar)s by TEMPO mediated free radical polymerization. Macromol Chem Phys 202(17) 3426-3431... 

Dynamic formation of graft polymers was synthesized by means of the radical crossover reaction of alkoxyamines by using the complementarity between nitroxide radical and styryl radical (Fig. 8.13) [40]. Copolymer 48 having alkoxyamine units on its side chain was synthesized via atom transfer radical polymerization (ATRP) of TEMPO-based alkoxyamine monomer 47 and MMA at 50°C (Scheme 8.9). The TEMPO-based alkoxyamine-terminated polystyrene 49 was prepared through the conventional nitroxide-mediated free radical polymerization (NMP) procedure [5,41], The mixture of copolymers 48 and 49 was heated in anisole... 

The inclusion of stable free radicals such as TEMPO (18, TO ) in free radical polymerizations leads to precise control of chain length by restricting the number of polymerizing chains (equation 96). This process is known as nitroxyl radical mediated polymerization (NRMP). 

Free-radical polymerization mediated by stable nitroxyl radicals like TEMPO (2,2,6,6-tetramethylpiperidinyl-l-oxy) (Fig. 6.23) is a simple and robust method to synthesize homopolymers and random and block copolymers with narrow poly-dispersities and/or controlled chain architectures. A key to the success of this polymerization is believed to be the reversible combination of a polymer radical, P , with a stable nitroxyl radical, N, to form an adduct, P-N, which is a dormant species ... 

Poly(styrene-c i-t-butyl acrylate). One of the major issues with TEMPO mediated "living free radical polymerizations is the very different reactivities of st5n ene and acrylates. It has been observed that TEMPO mediated styrene homopolymerization achieve high conversion, with low polydispersity and excellent molecular weight control. In contrast acrylate homopolymerizations exhibit considerably lower conversion with much broader polydispersities. Figure 2. However, it has been shown that "living" free radical polymerization permits the synthesis of well defined... 

Since its discovery in 1993 [27], nitroxide-mediated polymerization (NMP) has been the most extensively studied technique from the dissociation-combination dass of LRP mechanisms (Scheme 13.7). This method is also commonly termed stable free radical polymerization (SFRP). NMP reactions are distinguished by the use of stable free radical nitroxide molecules (N ) as the controlling agent [e.g. 2,2,6,6-tetramethylpiperidin-l-oxyl (TEMPO), (l-diethylphosphono-2,2-dimethyl)propyl nitroxide (DEPN)]. 

Nitroxide Mediated Living Radical Polymerization. Another controlled radical polymerization developed in recent years is stable free radical mediated polymerization (SFRP), also called as nitroxide mediated radical polymerization (NMP) (78,131). This type polymerization can be reahzed through reversible deactivation of growing radicals by stable radical such as 2,2,6,6-tetramethyl-piperidinyloxy (TEMPO). 

Thus, in stable free radical polymerization (SFRP), also called nitroxide-mediated polymerization or NMP (which was discovered while using TEMPO as a radical scavenger in investigating the rate of initiation during free radical polymerization), it is believed that reversible combination of a polymer radical, P, with a stable niUoxyl radical, N, takes place forming an adduct, P-N, that exists as a dormant species ... 

As shown above, living free radical system, based on TEMPO as a mediating counter-radical, occurs by a modi ed free-radical polymerization process which could permit the preparation of well-de ned random copolymers. Thus, using the hydroxy derivative of TEMPO, 2-phenyl-2-[(2,2,6,6-tetramethyl-piperidino)oxy]-l-ethanol(IV)... 

Gabaston, L.I., Furlong, S.A., Jackson, R.A. and Armes, S.P. (1999) Direct synthesis of novel acidic and zwitterionic block copolymers via TEMPO-mediated living free-radical polymerization. Polymer, 40,4505-4514. 

The last decades have witnessed the emergence of new living Vcontrolled polymerizations based on radical chemistry [81, 82]. Two main approaches have been investigated the first involves mediation of the free radical process by stable nitroxyl radicals, such as TEMPO while the second relies upon a Kharash-type reaction mediated by metal complexes such as copper(I) bromide ligated with 2,2 -bipyridine. In the latter case, the polymerization is initiated by alkyl halides or arenesulfonyl halides. Nitroxide-based initiators are efficient for styrene and styrene derivatives, while the metal-mediated polymerization system, the so called ATRP (Atom Transfer Radical Polymerization) seems the most robust since it can be successfully applied to the living Vcontrolled polymerization of styrenes, acrylates, methacrylates, acrylonitrile, and isobutene. Significantly, both TEMPO and metal-mediated polymerization systems allow molec-... 

Chloromethyl polystyrene can be converted to a free-radical initiator by reaction with 2,2,6,6-tetramethylpipcridinc-/V-oxyl (TEMPO). Radical polymerization of various substituted alkenes on this resin has been used to prepare new types of polystyrene-based supports [123]. Alternatively, cross-linked vinyl polystyrene can be copolymerized with functionalized norbornene derivatives by ruthenium-mediated ringopening metathesis polymerization [124],... 

Narrow distribution in the backbone length as well as in the chemical composition or the branch frequency may be expected from a living-type copolymerization between a macromonomer and a comonomer provided the reactivity ratios are close to unity. This appears to have been accomplished to some extent with anionic copolymerizations with MMA of methacrylate-ended PMMA, 29, and poly(dimethylsiloxane) macromonomers, 30, which were prepared by living GTP and anionic polymerization, respectively [50,51]. Recent application [8] of nitroxide (TEMPO)-mediated living free radical process to copolymerizations of styrene with some macromonomers such as PE-acrylate, la, PEO-methacr-ylate, 27b, polylactide-methacrylate, 28, and poly(e-caprolactone)-methacrylate, 31, may be a promising approach to this end. 

---