Technician Qualification

Some problems routinely seen during swabbing include inappropriate use of swabs, contamination of swabs during sampling, and poor swabbing technique. The latter should be identified and corrected before the validation is 

For example, swab an x cm square area by the following procedure  

To qualify the swab technician, place a known amount of API, detergent, or other chemical (degradant) under evaluation onto a plate of x cm surface area consisting of the same surface type as the equipment to be swabbed. If the production equipment consists of multiple surface types, such as stainless steel, glass and plastic, then all these surface types need to be included in the qualification. The technician should obtain approximately the same recovery as the recovery determined from the initial swab selection recovery studies (swab spiking). 

---

Attachments cleaning SOPs, swab selection and recovery studies, swab technician qualification studies, and method validations... 

The texts are for those interested in the basics of analytical chemistry and instrumental techniques who wish to study in a more flexible way than traditional institute attendance or to augment such attendance. A series of these units may be used by those undertaking courses leading to BTEC (levels IV and V), Royal Society of Chemistry (Certificates of Applied Chemistry) or other qualifications. The level is thus that of Senior Technician. 

Level Three Incident A hazardous materials incident which is beyond the controlling capability of a HMRT (technician or specialist level) whose qualifications are explained in 29 CFR 1910 and/or which must be additionally assisted by qualified specialty teams or individuals. 

A qualification pathway should include all of the training programs necessary to qualify employees in job functions. A sample personal qualification pathway for a compression technician is shown in Figure 9. 

Management, specialist, technician, evident staff, employee, and operator training and qualification records are evident, particularly when specialist skills are required, to ensure all employees are adequately qualified. 

The qualification and experience of a technician or scientist is subject to change Once useful skills may not be needed anymore, when the work or the equipment change, and new skills have to be developed and new experience has to be acquired. These changes have to be documented, and management has the obligation to ensure the maintenance of such records by appointing... 

A.27. Effluents. The inspection programme should include verification that any releases of effluents are within the authorized discharge limits. This should include the review of systems for the treatment of radioactive waste and for the monitoring of effluents. Training and qualifications for technicians and workers anployed in the areas concerned should also be reviewed. 

Qualifications of health physicists, safety analysts, technicians, and engineers can be obtained from the many texts relating to the organization, fimction, and running of a good health and safety department. There are many good references with details. ... 

The first order of business for DACUM participants was to develop an occupation title and job description. The occupation title of fuel cell service technician was chosen. DACUM participants emphasized that this title would apply only to those who operated and maintained the cells, not installers. DACUM participants agreed that this distinction was important, because the skills and qualifications of fuel cell installers are different than the ones required of operators and maintainers state licensed plumbers and electricians will be required for fuel cell installation. 

These two sections, 40.211 Who conducts DOT alcohol tests , and 40.213 What training requirements must STTs and BATs meet , provide the qualification and training requirements for screening test technicians (STTs) and breath alcohol technicians (BATs). 

---