Synchrotron radiation vapor deposition

The delta-function deconvolution method (FFT) was used to improve the spectral resolution and to remove the plural scattering effect at the core-loss edge in electron energy-loss spectroscopy (EELS). The zero-loss peak (used as an instrumental resolution function) works as a nonattenuation high-pass filter in this technique [17]. Reflectance spectra in the vacuum ultraviolet of microcrystalline 3-BN, prepared by plasma CVD (chemical vapor deposition), and of sintered (3-BN measured with synchrotron radiation in the energy range from 5 to 25 eV, show reflectance peaks near 11.4 and 14 eV and a broad peak near 18 eV. The peaks at 11.4 and 14.0 eV are assigned to the E and E2 peaks of the sphalerite-type semiconductor [18]. 

Polyhydroxy acids are another group of biopolymers. Since polylactic acids, polyglycolic acid, and poly(citric acid) are classified as thermoplastic polyesters (saturated), they lack reactive functional groups for surface reactions. Moreover, any chemical manipulation to create activation sites results in hydrolysis of the ester bonds. The only reported successful methods for functionalization of polyhydroxy acids are blending them with ECPs, or using a plasma polymerization process [29]. Prior to the plasma polymerization process, surface activation or ionization of these biopolymers must be carried out, which is acquired by means of vapor phase deposition, laser deposition, microwave or synchrotron radiation [30], pulsed arc, pulsed combustion, spark, or friction induction [30], electron beams, plasma induction, corona, photons, ion beams, and X-rays [25]. 

---