Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Supported metal nanoparticles, sonochemical

It is also observed in Fig. 5.3 that Pd(II) ions are partly adsorbed on AI2O3 before ultrasonic irradiation the concentration of Pd(II) just before irradiation becomes ca. 0.8 mM, although 1 mM Pd(II) was added in the sample solution. From a preliminary adsorption experiment, the rate of Pd(II) adsorption on A1203 was found to be slow compared with those of Pd(II) reduction in the presence of alcohols. Therefore, it is suggested that the sonochemical reduction of Pd(II) in the presence of alcohols mainly proceeds in the bulk solution. The mechanism of the Pd/Al203 formation is also described in the section of sonochemical synthesis of supported metal nanoparticles. [Pg.136]

By using sonochemical reduction processes, supported metal nanoparticles on metal oxides such as Au/Si02, Au/Fe203, Pd/Fe203, Pt/Ti02, etc. can be synthesized [38 -1],... [Pg.145]

As described in this chapter, the sonochemical reduction technique appears to be a promising method for the preparation of various types of metal nanoparticles in an aqueous solution. By choosing more efficient organic additives, easily-reducible metal precursors, supports and templates with an appropriate role, more advanced functional nanoparticles could be synthesized successfully using the sonochemical reduction technique. In future, it is also possible to develop effective synthetic methods by combining the sonochemical method with other chemical methods. [Pg.148]

Such a reaction of Fe(CO)5 (at 293-363 K, PVP) without ultrasonic radiation proceeds very slowly and only after few days there, a material is formed with very low Fe content (2%, the isolated particles 2-5 nm in size). It is of interest that the sonochemical decomposition of Fe(CO)5 does not proceed in the presence of PVP if THF is used as the solvent, but the reaction is very effective when anisole is used as the solvent and PFO is used as the polymer matrix [93]. A black product formed contains up to 10% (in mass) of the spheric particles of nonoxidized Fe (mainly y-Fe, with little content of a-Fe) with 1-12 nm in size (the mean diameter is 3nm, as shown in Figure 3.7). It is likely that the big particles present the flocks of little ones ( 2-2.5nm). The sonochemical synthesis allows us to produce the functionalized amorphous nanoparticles of ferric oxide with 5-16 nm in diameter [94]. The ultrasonic irradiation in the PFO presence allows us to also produce the stabilized nanoparticles of copper, gold, and so on. In the literature the findings are not about the bimetallic particle formation in the ultrasonic fields by carbonyl metal reduction in the polymer matrices presence (as, for example, in the case of the carbon-supported Pt-Ru from PtRu5C(CO)i6 reduced clusters [95]). [Pg.107]

The synthesis of nanostructured inorganic materials by sonochemical had already been synthesized a large number of nanostructures of different compositions with comparable or better than the properties of the same when summed with other preparation methods. The versatility of this method also extends to the relative flexibility of reaction conditions such as the nature of the precursors and their solutions, the possibility of addition of auxiliaries, and the presence of traps (species immobilized) to the nanoparticles. All types of metallic nanostructured materials synthesized by sonochemical described (powders, colloids, or nanoparticles supported) can also be obtained for other classes of compounds such as oxides [58-60], sulfides [61], Suslick [20, 62], and more recently selenides [63, 64] and tellurides [65]. [Pg.299]


See other pages where Supported metal nanoparticles, sonochemical is mentioned: [Pg.143]    [Pg.159]    [Pg.165]    [Pg.413]    [Pg.272]    [Pg.219]   


SEARCH



Metal nanoparticle

Metal nanoparticles

Nanoparticle supported nanoparticles

Sonochemical

Sonochemically

Support nanoparticles

Supported nanoparticles

© 2024 chempedia.info