Superacid alkylation

My work on long-lived (persistent) carbocations dates back to the late 1950s at Dow and resulted in the first direct observation of alkyl cations. Subsequently, a wide spectrum of carbocations as long-lived species was studied using antimony pentafluoride as an extremely strong Lewis acid and later using other highly acidic (superacidic) systems. 

It was not fully realized until my breakthrough using superacids (vide infra) that, to suppress the deprotonation of alkyl cations to olefins and the subsequent formation of complex mixtures by reactions of olefins with alkyl cations, such as alkylation, oligomerization, polymerization, and cyclization, acids much stronger than those known and used in the past were needed. 

The formation of the (X-delocalized norbornyl cation via ionization of 2-norbornyl precusors in low-nucleophilicity, superacidic media, as mentioned, can be considered an analog of an intramolecnlar Friedel-Crafts alkylation in a saturated system. Indeed, deprotonation gives nortricyclane,... 

Superacids such as HF-SbF effect cyclo alkylation of aryl alkyl ketones to give tetralone derivatives (58). Tandem iatramolecular cyclo alkylatioas can be achieved when functional groups are located ia close proximity (59). 

On the other hand, under superacidic conditions, alkanes are readily alkylated via front-side CJ-iasertion by carbocationic alkylating agents. The direct alkylation of the tertiary C—H CJ-bond of isobutylene with isobutane has been demonstrated (71). The stericaHy unfavorable reaction of tert-huty fluoroantimonate with isobutane gave a Cg fraction, 2% of which was 2,2,3,3-tetramethylbutane ... 

Sulfonated styrene—divinylbensene cross-linked polymers have been appHed in many of the previously mentioned reactions and also in the acylation of thiophene with acetic anhydride and acetyl chloride (209). Resins of this type (Dowex 50, Amherljte IR-112, and Permutit Q) are particularly effective catalysts in the alkylation of phenols with olefins (such as propylene, isobutylene, diisobutylene), alkyl haUdes, and alcohols (210) (see Ion exchange). Superacids. 

Solid superacid catalysts, proposed as replacements for catalysts such as hydrogen fluoride and aluminum chloride for processes such as alkylation and acylation (Misono and Okuhara, 1993). 

Stereoselectivity in the condensation reaction of 2-arylethylamines with carbonyl compounds to give 1,2,3,4-tetrahydroisoquinoline derivatives was somewhat dependent on whether acid catalysis or superacid catalysis was invoked. Particularly in the cases of 2-alkyl-N-benzylidene-2-phenethylamines, an enhanced stereoselectivity was observed with trifluorosulfonic acid (TFSA) as compared with the weaker acid, trifluoroacetic acid (TFA). Compound 43 was cyclized in the presence of TFA to give modest to good transicis product ratios. The analogous compound 44 was cyclized in the presence of TFSA to give slightly improved transicis product ratios. 

The most stable of all alkyl cations is the tert-butyl cation. Even the relatively stable tert-pentyl and fen-hexyl cations fragment at higher temperatures to produce the tert-butyl cation, as do all other alkyl cations with four or more carbons so far studied. Methane,ethane, and propane, treated with superacid, also yield ten-butyl cations as the main product (see 2-17). Even paraffin wax and polyethylene give the ten-butyl cation. Solid salts of frrf-butyl and rerf-pentyl cations (e.g., MeaC" SbFg ) have been prepared from superacid solutions and are stable below -20°C. ... 

Additional evidence for the SnI mechanism, in particular, for the intermediacy of carbocations, is that solvolysis rates of alkyl chlorides in ethanol parallel carbocation stabilities as determined by heats of ionization mea.sured in superacid solutions (p. 219). It is important to note that some solvolysis reactions proceed by an Sn2 mechanism." ... 

It is likely that protonated cyclopropane transition states or intermediates are also responsible for certain non-1,2 rearrangements. For example, in superacid solution, the ions 14 and 16 are in equilibrium. It is not possible for these to interconvert solely by 1,2 alkyl or hydride shifts unless primary carbocations (which are highly unlikely) are intermediates. However, the reaction can be explained " by postulating that (in the forward reaction) it is the 1,2 bond of the intermediate or transition state 15 that opens up rather than the 2,3 bond, which is the one that would open if the reaction were a normal 1,2 shift of a methyl group. In this case, opening of the 1,2 bond produces a tertiary cation, while opening of the 2,3 bond would give a secondary cation. (In the reaction 16 14, it is of course the 1,3 bond that opens). 

The last step is hydrolysis of the unstable hemiacetal. Alkoxycarbocation intermediates (73, R=alkyl) have been isolated in superacid solution at low temperatures, and their structures proved by The protonated hydroperoxides... 

Sulphated zirconia catalysts can be acidic or superacidic depending on the method of treatment. A variety of acid-catalysed reactions, referred to earlier in this section, can be carried out with sulphated zirconia. Yadav and Nair (1999) have given a state-of-the art review on this subject. Examples of benzylation of benzene with benzyl chloride / benzyl alcohol, alkylation of o-xylene with. styrene, alkylation of diphenyl oxide with 1-dodecene, isomerization of epoxides to aldehydes, acylation of benzene / chlorobenzene with p-chloro benzoylchloride, etc. are covered in the review. 

The 2-methyl-l-triisopropylsilylpropyl-2-cation (9) is the first experimentally accessible jS-silyl substituted alkyl cation in superacid solution.31,32... 

Theoretically, even the direct alkylation of carbenium ions with isobutane is feasible. The reaction of isobutane with a r-butyl cation would lead to 2,2,3,3-tetramethylbutane as the primary product. With liquid superacids under controlled conditions, this has been observed (52), but under typical alkylation conditions 2,2,3,3-TMB is not produced. Kazansky et al. (26,27) proposed the direct alkylation of isopentane with propene in a two-step alkylation process. In this process, the alkene first forms the ester, which in the second step reacts with the isoalkane. Isopentane was found to add directly to the isopropyl ester via intermediate formation of (non-classical) carbonium ions. In this way, the carbenium ions are freed as the corresponding alkanes without hydride transfer (see Section II.D). This conclusion was inferred from the virtual absence of propane in the product mixture. Whether this reaction path is of significance in conventional alkylation processes is unclear at present. HF produces substantial amounts of propane in isobutane/propene alkylation. The lack of 2,2,4-TMP in the product, which is formed in almost all alkylates regardless of the feed (55), implies that the mechanism in the two-step alkylation process is different from that of conventional alkylation. 

A variety of solid acids besides zeolites have been tested as alkylation catalysts. Sulfated zirconia and related materials have drawn considerable attention because of what was initially thought to be their superacidic nature and their well-demonstrated ability to isomerize short linear alkanes at temperatures below 423 K. Corma et al. (188) compared sulfated zirconia and zeolite BEA at reaction temperatures of 273 and 323 K in isobutane/2-butene alkylation. While BEA catalyzed mainly dimerization at 273 K, the sulfated zirconia exhibited a high selectivity to TMPs. At 323 K, on the other hand, zeolite BEA produced more TMPs than sulfated zirconia, which under these conditions produced mainly cracked products with 65 wt% selectivity. The TMP/DMH ratio was always higher for the sulfated zirconia sample. These distinctive differences in the product distribution were attributed to the much stronger acid sites in sulfated zirconia than in zeolite BEA, but today one would question this suggestion because of evidence that the sulfated zirconia catalyst is not strongly acidic, being active for alkane isomerization because of a combination of acidic character and redox properties that help initiate hydrocarbon conversions (189). The time-on-stream behavior was more favorable for BEA, which deactivated at a lower rate than sulfated zirconia. Whether differences in the adsorption of the feed and product molecules influenced the performance was not discussed. 

Fluorinated polymers, especially polytetrafluoroethylene (PTFE) and copolymers of tetrafluoroethylene (TFE) with hexafluoropropylene (HFP) and perfluorinated alkyl vinyl ethers (PFAVE) as well as other fluorine-containing polymers are well known as materials with unique inertness. However, fluorinated polymers with functional groups are of much more interest because they combine the merits of pefluorinated materials and functional polymers (the terms functional monomer/ polymer will be used in this chapter to mean monomer/polymer containing functional groups, respectively). Such materials can be used, e.g., as ion exchange membranes for chlorine-alkali and fuel cells, gas separation membranes, solid polymeric superacid catalysts and polymeric reagents for various organic reactions, and chemical sensors. Of course, fully fluorinated materials are exceptionally inert, but at the same time are the most complicated to produce. 

The generation of a-ferrocenyl-P-silyl substituted vinyl cations of type 28 does not require superacidic conditions, they can be generated by protonation of l-ferrocenyl-2-trialkylsilyl alkynes with trifluoroacetic acid at room temperature. The SiR3-groups with larger alkyl substituents increase the lifetime of this type of carbocations. 

---