Sulfur iron sulfides, sulfate, sulfide

NKK s Bio-SR process is another iron-based redox process which instead of chelates, uses Thiobacillusferroidans )2iQ. - 2i to regenerate the solution (9). This process absorbs hydrogen sulfide from a gas stream into a ferric sulfate solution. The solution reacts with the hydrogen sulfide to produce elemental sulfur and ferrous sulfate. The sulfur is separated via mechanical means, such as filtering. The solution is regenerated to the active ferric form by the bacteria. 

Iron Precipitation. Rich sulfide ore or Hquated antimony sulfide (cmde antimony) is reduced to metal by iron precipitation. This process, consisting essentially of heating molten antimony sulfide ia cmcibles with slightly more than the theoretical amount of fine iron scrap, depends on the abihty of iron to displace antimony from molten antimony sulfide. Sodium sulfate and carbon are added to produce sodium sulfide, or salt is added to form a light fusible matte with iron sulfide and to faciHtate separation of the metal. Because the metal so formed contains considerable iron and some sulfur, a second fusion with some Hquated antimony sulfide and salt foHows for purification. 

The use of free-radical reactions for this mode of ring formation has received rather more attention. The preparation of benzo[Z)]thiophenes by pyrolysis of styryl sulfoxides or styryl sulfides undoubtedly proceeds via formation of styrylthiyl radicals and their subsequent intramolecular substitution (Scheme 18a) (75CC704). An analogous example involving an amino radical is provided by the conversion of iV-chloro-iV-methylphenylethylamine to iV-methylindoline on treatment with iron(II) sulfate in concentrated sulfuric acid (Scheme 18b)(66TL2531). 

The modem process uses a potassium-sulfate-promoted vanadium(V) oxide catalyst on a silica or kie,selguhr support. The SO2 is obtained either by burning pure sulfur or by roasting sulfide minerals (p. 651) notably iron pyrite, or ores of Cu, Ni and Zn during the production of these metals. On a worldwide basis about 65% of the SO2 comes from the burning of sulfur and some 35% by the roasting of sulfide ores but in some countries (e.g, the UK) over 95% conies from the former. 

Common pollutants in a titanium dioxide plant include heavy metals, titanium dioxide, sulfur trioxide, sulfur dioxide, sodium sulfate, sulfuric acid, and unreacted iron. Most of the metals are removed by alkaline precipitation as metallic hydroxides, carbonates, and sulfides. The resulting solution is subjected to flotation, settling, filtration, and centrifugation to treat the wastewater to acceptable standards. In the sulfate process, the wastewater is sent to the treatment pond, where most of the heavy metals are precipitated. The precipitate is washed and filtered to produce pure gypsum crystals. All other streams of wastewater are treated in similar ponds with calcium sulfate before being neutralized with calcium carbonate in a reactor. The effluent from the reactor is sent to clarifiers and the solid in the underflow is filtered and concentrated. The clarifier overflow is mixed with other process wastewaters and is then neutralized before discharge. 

The catalytic effect of graphite A thus depends on iron impurities, e. g. Fe304, and probably also on iron sulfides or sulfates, because sulfur is also present in this graphite, and all these iron compounds are known catalysts of FC acylation [69, 73, 74], In this respect, it seems that FeCl3 could be the true catalyst generated in situ by the reaction of the different iron compounds with acid chloride and hydrogen chloride. In the... 

The biotransformations of sulfur compounds by microorganisms can have large-scale impacts on global chemistry. As an example, sulfate-reducing bacteria have, throughout histoiy, formed major deposits of elemental sulfur and iron sulfides on Earth, and these processes are continuing today (1). Contemporary sulfate-reduction coupled with the oxidation of reduced inorganic sulfur... 

---