Sulfite hydrolysis

The reaction with sodium sulfite or bisulfite (5,11) to yield sodium-P-sulfopropionamide [19298-89-6] (C3H7N04S-Na) is very useful since it can be used as a scavenger for acrylamide monomer. The reaction proceeds very rapidly even at room temperature, and the product has low toxicity. Reactions with phosphines and phosphine oxides have been studied (12), and the products are potentially useful because of thek fire retardant properties. Reactions with sulfide and dithiocarbamates proceed readily but have no appHcations (5). However, the reaction with mercaptide ions has been used for analytical purposes (13)). Water reacts with the amide group (5) to form hydrolysis products, and other hydroxy compounds, such as alcohols and phenols, react readily to form ether compounds. Primary aUphatic alcohols are the most reactive and the reactions are compHcated by partial hydrolysis of the amide groups by any water present. 

Hydrolysis of dialkyl sulfites under acidic and alkaline conditions, which is followed by the use of OH2, proceeds by attack at sulfur to give S—O cleavage (72). The rate of hydrolysis is generally faster for cycHc and aryl sulfites than for dialkyl sulfites (73). Activation parameters of hydrolysis are known for some sulfites, and the increased rate for ethylene sulfite results from a reduced entropy of activation which results from a rigid ring stmcture (74). 

In the determination of free formaldehyde in solution, eg, commercial reagents and pad bath formulation, the conditions of analysis allow hydrolysis of the /V-methy1o1 groups, usually between <1% and several percent. The NaOH formed is titrated with hydrochloric acid (82). Because of an incomplete reaction of sulfite with free formaldehyde, these low temperature methods (83) detect only 80—90% of the free formaldehyde present. Skill is important for correct results. 

Although the hydrolysis of wood to produce simple sugars has not proved to be economically feasible, by-product sugars from sulfite pulping are used to produce ethanol and to feed yeast (107). Furthermore, a hemiceUulose molasses, obtained as a by-product in hardboard manufacture, can be used in catde feeds instead of blackstrap molasses (108). Furfural can be produced from a variety of wood processing byproducts, such as spent sulfite Hquor, bquors from the prehydrolysis of wood for kraft pulping, hardboard plants, and hardwood wastes (109). 

Hydrolysis of Ethyl Esters. The hydrolysis of esters (other than ethyl sulfates) is not a commercial route for producing ethanol. An indirect hydration of ethylene actually takes place during the proposed (153) hydrolysis of ethyl sulfite cataly2ed by silver sulfate. 

Consistent with this, experiments using HS" labelled with radioactive (p. 661) show that acid hydrolysis of the 8203 produces elemental sulfur in which two-thirds of the activity is concentrated. Thiosulfates can also he made by boiling aqueous solutions of metal sulfites (or hydrogen sulfites) with elemental sulfur according to the stoichiometry... 

SO2. Consistent with this, air-oxidation of alkaline dithionite solutions at 30-60° are of order one-half with respect to [8204 ]. Acid hydrolysis (second order with respect to [8204 ]) yields thiosulfate and hydrogen sulfite, whereas alkaline hydrolysis produces sulfite and sulfide ... 

Reaction of the spirocyclic imidazoline 316 with glyoxal and sodium hydrogen sulfite results in hydrolysis of the aminal and subsequent double condensation to give the tetrazolopyridopyrazine 317 (Equation 109) <1999JHC117>. The pyridopyridazinylhydrazine 318 can be cyclized to the fused triazole 319 by reaction with formic acid (Equation 110) <1998SC2871>. 

Fahmey (148). The pepsin-catalyzed hydrolysis of the racemic phenyl cycloalkyl sulfites 99 was found to be hi ly enantioselective, and it gave the unreacted sulfites 99 in optically active form. 

VIII. Hydrolysis of Wood During Sulfite Process I ulping. 186... 

The free sulfur dioxide in the sulfite pulping liquor promotes hydrolysis of the more easily hydrolyzable constituents of wood. A wood such as spruce, which contains 70.1% carbohydrate substances, of which 85.3% are potentially fermentable, gives a 50% yield of a pulp containing 97.7% carbohydrate, of which about 80% is fermentable. The... 

---