Stress granule materials

FIG. 20-70 The influence of moisture as a percentage of sample saturation S on granule deformabihty. Here, deformation strain (AL/L) is measured as a function of applied stress, with the peak stress and strain denoted by tensile strength and critical strain (AL/L) of the material. Dicalcium phosphate with a 15 wt % binding solution of PVP/PVA Kolhdon VAG4. [Holm et al., Powder Tech., 43, 213 (1.9S.5J,] With land permission from Elsevier Science SA, Lausanne, Switzerland. 

Insoluble Lubricants. Lubricants act by interposing an intermediate layer between the tablet constituents and the die wall. The smaller the amount of stress needed to shear the material, the better its lubricant properties will be. Since they are primarily required to act at the tooling/material interface, lubricants should be incorporated in the final mixing step after all granulation and... 

The experience that the manufacturing equipment is less stressed when the polyester is formed first, and the availability of cheap polyfethylene terephtha-late) scrap, led to patents where all kind of processes were claimed to make po-ly(ester-imide) wire enamels from this polyester [97-101]. The problem is that clean, unpigmented and granulated poly(ethylene terephthalate) is needed for profitable production. There are some indications that this process is used today for industrial productions of wire enamels. Polyethylene terephthalate) is not only used as a raw material for the synthesis, but it can also be blended with a poly(ester-imide) to give a useful wire enamel [102]. 

---